Allen's new PRO430E Edger Walk-Behind Trowel features a unique rotating edge ring that is perfect for troweling along the edges of walls or around protruding pipe and conduit.
Minnich highlights concrete vibration innovations at World of Concrete 2019
Minnich Manufacturing showcased its latest concrete vibration solutions at World of Concrete 2019 in Las Vegas. The manufacturer of concrete dowel pin drills, concrete vibrators and vibrator monitoring systems displayed the Stinger concrete electric flex shaft vibrator, M-Box high cycle vibration control solution, and Auto Vibe paving vibrator monitoring systems in Booth C4213.
"At Minnich, we're dedicated to helping concrete contractors and concrete paving superintendents maximize quality," said Rob Minnich, vice president of marketing for Minnich Manufacturing. "We're excited to display our concrete vibration innovations at the show, and will continue to bring products to the industry that support the findings of concrete research facilities across the country."
Stinger Electric Flex Shaft Concrete Vibrator
Theis a 14.5-pound double-insulated universal motor that can drive the full line of Minnich vibrator shafts and heads from 3/4 inch to 2 1/2 inches. Available in a 15-amp (115-volt) version, it offers a more compatible speed range of 11,000 to 13,000 vibrations per minute (vpm) to meet today's concrete placement challenges.
The unit comes standard with a quick disconnect that adapts to the vibrator shafts and heads of many other manufacturers. A durable protective frame extends vibrator life with urethane end caps that absorb shock while supporting easy-to-grip handles.
The Stinger provides quiet operation meeting Occupational Safety and Health Administration (OSHA) A 29 CFR 1910.95 standards. Its double-insulated motor runs safely when grounded systems are compromised.
Watch a Stinger video at.
Minnich M-Box Vibration Control Solution
Theis an innovative control speed high-cycle power converter that enables high-cycle vibrator operators to control the speed/vibrations per minute (VPM) of up to two vibrators. The M-Box minimizes time and cost associated with patching structural concrete surface blemishes caused by excessive vibrator speeds.
In pumped concrete mixes, available/bleed water can be an issue. The faster the vibrator speed, the more water separation occurs and collects on the form faces. Chipping and patching labor and patch material can be expensive.
Minnich M-Box operators can select from speeds of 6,000, 8,000, and 10,800 VPM. The product converts the 230-volt, single-phase outlet of a 3,500-watt generator to 230-volt, three-phase output, allowing the operator to choose a uniform and compatible constant speed under different concrete loads.
Minnich Auto Vibe II and III
Thefor paving machines can monitor, control and program hydraulic vibrator speeds during the paving process for superior concrete surface results.
The Auto Vibe II monitors up to 62 hydraulic vibrators during the paving process, recording and displaying real-time data that can be used to ensure proper vibrator operation. Readings are recorded by time, distance traveled, or at the push of a button. Reports can be generated after the data is imported from a USB drive. The system can be installed on any new or existing hydraulic vibrator system.
The Auto Vibe III monitors and records VPM data just like Auto Vibe II with the added feature of controlling and maintaining the vibrator vibrations per minute (VPM) at the monitor instead of at the manifold. Once the VPM speed is set, the monitor communicates with the manifold and automatically makes adjustments to maintain desired speeds.
The complete line of Minnich vibration solutions includes high cycle, paving, flex shaft and monitoring units.
Minnich also displayed itsfor on-grade, on-slab, machine- mounted and utility dowel pin drills at the show. The Minnich dust collection system meets the requirements for dowel pin drills found in Table 1 of the OSHA final respirable crystalline silica standard when used with an appropriate filter.
More from Concrete Construction
GSSI has launched a new video series as part of their GPR training academy. The video series features short and informative videos focusing on individual product lines to help users through frequently asked questions.
McNeilus Truck and Manufacturing, Inc., an Oshkosh Corporation company, has taken one of its most reliable and respected machines, the Oshkosh S-Series front discharge concrete mixer, and made it even better with an array of new features and technologies that pay off with better visibility, increased hauling capability and tighter turning radius.
More than 60 paver operators from across the U.S. gathered for specialized training as well as for the unveiling of the newest Terex Bid-Well Remote Control paver (model 3600RC) at Terex Bid-Well's annual service school, which took place last month at its facility in Canton, South Dakota.
7,000 jobs under threat as Toronto moves to restrict critical concrete work for high-rise construction
The City of Toronto is poised to restrict concrete work for the construction of high-rise buildings through amendments to the noise bylaw in a move that will threaten more than 7,000 jobs and cripple the industry's ability to deliver much needed housing supply to Torontonians.
Cemen Tech has introduced AP Office and AP Mobile, a new set of tools in its ACCU-POUR technology suite available for volumetric concrete mixer users. AP Office and AP Mobile are an all-new cloud-based productivity solution that provides users a complete view of their concrete business operations. The ACCU-POUR technology suite is designed to make an impact on operations of all sizes, giving users more control over their business than ever before.
Minnich Manufacturing, a manufacturer of concrete dowel pin drills, concrete vibrators and vibrator monitoring systems, showcased the Stinger electric flex shaft vibrator at The ARA Show in Anaheim, California. The Stinger — is a lightweight, durable and versatile vibration solution. "The Stinger is an ideal unit to meet a variety of concrete vibration needs," said Rob Minnich, president/chief marketing officer (CMO) for Minnich Manufacturing. "We're excited to showcase this solution to the rental industry in our return to The ARA Show."
GOMACO will bring their zero-turn capable pavers for maneuverability to Bauma 2019 in Munich, Germany. Contractors around the world face the same job-site challenges, from short runs, tight radii and corners in parking lots, to a multitude of obstacles to pave around. GOMACO's Xtreme curb and gutter machines handle these challenges and can also slipform a 24 inch (610 mm) radius or less. The exciting and fun new technology will be on display at Bauma 2019, April 8-14, in the Outdoor Area FS, Stand 1210/3.
At Bauma 2019 Metalgalante will show the Carmix 45 FX, a new machine that extends the range of self-loading concrete mixers together with Carmix 25 FX and Carmix ONE. According to the company, this compact, easy-to-drive and low-maintenance off-road machine is the most effective and economical solution for producing top-quality concrete in any condition and at any construction site.
GOMACO's new Xtreme GT-3600 curb and gutter machine is displayed for the first time ever in GOMACO's booth in the Central Hall at World of Concrete. The GT-3600 was the first three-track machine to slipform a 24-inch (610-mm) radius, and now, with the Xtreme package on board, tight radius paving is easier and more efficient than ever before. The Xtreme package adds G+ radius software with slew drives, smart-sensored hydraulics, and intelligence to the GOMACO GT-3600.
GOMACO's GT-3600 was the first three-track machine to slipform a 24-inch (610-mm) radius and now, the new Xtreme GT-3600 curb and gutter machine with the Xtreme package on board makes tight radius paving easier and more efficient than ever before. The Xtreme package adds G+ radius software with slew drives, smart-sensored hydraulics, and intelligence to the GOMACO GT-3600. The Xtreme GT-3600 will be displayed for the first time ever in GOMACO's booth in the Central Hall at World of Concrete 2019 in Las Vegas.
This April 8 to 14, Liebherr will give attendees of Bauma 2019 a unique chance to experience its latest innovations first-hand, ranging from construction machines to material handling, mining and components. Visitors can look forward to seeing many new technologies and other practical innovations at Liebherr's 14,000 m2 outdoor stand (809-813) and its indoor stand in hall A4, number 326.
Somero Enterprises, Inc., a manufacturer of technologically advanced concrete placing equipment and associated machinery, has introduced the Somero Sky Screed 25, the first Knuckle Boom Laser Screed machine in the world to allow screeding on structural high-rise and slab-on-grade applications.
Cemen Tech has introduced two new dump trailers – the DT-100 and DT-200 – to complement its line of volumetric concrete production solutions. Ideal for hauling concrete, sand, stone, mulch and other materials, these new heavy-duty one and two yard dump trailers are designed for use in residential building projects, rental yards, landscaping applications and other small- to mid-size jobs.
A new record for the largest continuous concrete pour was set in Washington state for the foundation of the Lincoln Square South tower. However, it was short-lived, as less than a month later, the tower next to it beat the record. Vital to both high-profile concrete pours were Putzmeister placing systems, seven truck-mounted boom pumps and a high-pressure trailer pump — all supplied by Ralph's Concrete Pumping, Inc. of Seattle.
Researchers at the University of Cambridge are using microencapsulation technologies developed by Dolomite Microfluidics to develop self-healing construction materials. As highlighted in recent BBC News broadcasts, the Department of Engineering's Geotechnical and Environmental Research Group is developing microcapsules containing ‘healing' agents – such as minerals, epoxy or polyurethane – which can be added to building materials to allow self-repair of small cracks which develop over time. Dr Livia Ribeiro de Souza, a postdoctoral researcher in the group, explained: "Many composite building materials used in the construction industry – such as concrete – suffer fatigue over time, developing small cracks. We are hoping to overcome this problem by adding microcapsules filled with ‘healing' agents to the concrete before it is used. The idea is that, as cracks begin to form, they rupture the microcapsules, releasing their payload and stabilizing the material."
GOMACO Corporation has appointed Aggregate Equipment as the authorized GOMACO distributor for the Atlantic provinces of Nova Scotia, New Brunswick, P.E.I., Newfoundland and Labrador in Canada. They will provide sales and service for GOMACO's full line of concrete construction products. The appointment was made by Kent Godbersen, vice president of Worldwide Sales and Marketing, GOMACO Corporation. Travis Brockman is GOMACO's district manager for the province.
The RD-1200XT pavement-drying unit from Greenville, South Carolina-based Road Dryer, LLC, quickly dries asphalt and concrete pavement, allowing crews to pave or apply surface treatments or striping after just one pass. The unit, which blows heated air up to 300° F directly downward through multiple nozzles, eliminates the risk of "flying objects," and allows traffic to flow in nearby lanes — reducing congestion caused by traffic restrictions. Available as a simple-to-operate trailer- or truck-mounted unit, the RD-1200XT can be adjusted for 8-ft to 12-ft (2.4m to 3.7m) drying widths. Because it dries pavement on demand, it provides flexibility for contractors and government agencies to meet timetables by minimizing delays from weather- and project-related wet conditions.
GOMACO has released their 2019 schedule of specialized courses covering GOMACO‘s full range of concrete paving equipment. Rod Schneider has been appointed as GOMACO University's new Director of Training after the retirement of Dennis Clausen at the end of the year. Since 1989, Schneider has served as the University's Training Coordinator.
Metalgalante has introduced new Carmix tools for contractors working with concrete on the job site. Carmix Bagger, a tool compatible with all Carmix machines, is set to increase their productivity at the work site, while the new Concrete Lab helps produce high-quality product.
McNeilus Truck and Manufacturing, Inc., an Oshkosh Corporation company, has announced the creation of a new program to train service technicians in the maintenance of concrete mixer trucks.
GOMACO's new Xtreme GT-3600 curb and gutter machine will be displayed for the first time ever in GOMACO's booth in the Central Hall at World of Concrete 2019. The GT-3600 was the first three-track machine to slipform a 24-inch (610-mm) radius, and now, with the Xtreme package on board, tight radius paving is easier and more efficient than ever before. The Xtreme package adds G+ radius software with slew drives, smart-sensored hydraulics, and intelligence to the GOMACO GT-3600.
Power Curbers Companies, LLC is pleased to announce that Stephen Bullock has been named Chief Operating Officer. Stephen has been with Power Curbers for twenty-four years, and has been Vice President of Sales and Marketing for the last fifteen years. He is a graduate of Wake Forest University. Stephen and his wife Andrea have two daughters, Katie and Laura.
Aquajet Systems AB will launch the Ergo System in the U.S. at World of Concrete 2019. The robot offers four times the power of a hand lance in a compact footprint that contractors can easily move around the jobsite. It is ideal for work on floors, walls and ceilings.
The Bosch GAS20-17AH Wet/Dry Dust Extractor is an industrial-grade powerhouse with a maximum 300 cfm (cubic feet of air per minute) capacity that filters fine dust, coarse dirt and liquids. The GAS20-17AH boasts 17-gallon capacity, and auto filter cleaning with HEPA filter to provide a complete package in helping users move toward OSHA silica dust regulation compliance. Its auto filter-clean system activates every 15 seconds and the HEPA filter captures 99.97 percent of particles at 0.3 microns and larger.
McNeilus Truck and Manufacturing, Inc., an Oshkosh Corporation company, is recognizing the manufacture of its 100,000th concrete mixer, making the record-setting machine one of the highlights of its booth at ConcreteWorks 2018, at the Gaylord National Resort & Convention Center, National Harbor, MD.
From cutting concrete to checking heights, contractors have a wide range of products to help them be more efficient and safe on the job site thanks to recent releases by Hilti. The company hosted its annual Innovation Day for media and displayed new and recent introductions, as well as a look into the future at a few innovations still on the drawing board.
The largest concrete pour in both Graham's history and the history of Kingston, Ontario, was a spill-free success that took place at the Canada Royal Milk project site. A whopping 4,289 cubic metres of concrete was poured over 9,400 square metres (100,000 square feet) within 20 hours.
Putzmeister America has put an expanded sales and service structure in place as it continues to provide industry-leading support that the company says meets the increasing requirements from its customers across North America.
The SBM SPECIMIX portable concrete plant produces ultra-high-performance concrete (UHPC) at an impressive 18 cubic metres an hour, requiring only a 10-minute mix time per batch. It is a container mobile (CM) plant, which means it is easy to transport and quick to set up and begin work. It can be used for medium- and large-scale applications and is completely insulated, making it suitable for year-round production, even in tough Canadian winters.
The all new GOMACO GP3 slipform paver has been a success on projects around the world since it was introduced two years ago. The paver's ability to slipform widths up to 30 feet (9.1 m) has made it a versatile and necessary paver on many projects. This year, at World of Concrete 2018, GOMACO announced the introduction of the two-track GP3 for contractors who prefer a two-track paver.
Putzmeister America, Inc. has unveiled its new .13 HPD Pump Cell, which will work with the brand-new 39Z-Meter Truck-Mounted Concrete Boom Pump. The BSA-grade pump kit is designed to be the highest-performing, longest-lasting pump cell on the market with a Rod Side output up to 180 yards3/hr (138 m3/hr), and Rod Side pressures of only 1,233 PSI (85 bar). It has been in development for a year, with 2,000 man-hours spent on its design.
The Terex Bid-Well 2418 workbridge features a unique frame design that allows the machine to fit over barrier wall steel on bridge decks, positioning workers close to the concrete to boost efficiency and productivity when hand-finishing and spray-curing slabs.
Enerpac has supplied a Korean-based engineering company, KLES, with strand jacks for an innovative tower scaffolding system called SKYFFOLDING (Platform-supported Boiler-in-Furnace Scaffolding and Lifting System). The Enerpac HSL1507 strand jacks support and lift the pendant-type, scaffolding system, as it grows, providing a safer working environment than traditional scaffolding during power plant boiler furnace maintenance.
GOMACO Corporation recently recognized Chieftain Equipment Inc. as a Top Ten Distributor for sales in the 2017 fiscal year. The award was presented in recognition for outstanding sales and distribution of GOMACO equipment in Canada.