Many of Epiroc's rig-mounted heavy hydraulic breakers now feature the patented Intelligent Protection System (IPS). Seamlessly combining Epiroc's AutoControl and StartSelect functions, this fully automated system provides simpler, more efficient and more economical operation than ever before.
AutoControl and StartSelect have been popular features on Epiroc (formerly Atlas Copco) hydraulic breakers for some years. AutoControl optimizes breaker performance by automatically adjusting the piston stroke length. The StartSelect system offers manual switching between two modes: the AutoStart mode enables easy positioning at the beginning of the breaking cycle, and in the AutoStop mode the breaker stops automatically to avoid blank firing at the end of the breaking cycle. Epiroc now takes these features to a higher level.
IPS means no manual switching
Now the functions are ingeniously combined in Epiroc´s Intelligent Protection System (IPS). IPS ensures that the hydraulic breaker always starts in the AutoStart mode. When the contact pressure between chisel and material increases and AutoControl switches from a short piston stroke to a long piston stroke IPS switches automatically to the AutoStop mode. When the chisel breaks through the material the breaker automatically shuts off and prevents blank firing.
Simpler, faster breaking with less wear and more uptime
IPS makes the breaking process even simpler for the operator by automatically adapting the breaker's operating behavior to any working condition. Uptime is higher since, with its fully automated functionality, IPS requires no operator intervention or reaction and thus there is no interruption of the working process.
The system permits more accurate and significantly faster positioning of the breaker, thanks to the centring effect, and avoids blank firing that often results in tool damage. This also eliminates mechanical strain on the carrier and the life of all wear components is extended. The physical load on the operator is minimized as well.
Heavy hydraulic breakers with IPS
Epiroc HB 2000, HB 2500, HB 3100, HB 3600 and HB 4700 are equipped with IPS. During 2018 all other heavy hydraulic breakers in Epiroc's range will incorporate this unique system.
As one of the latest models in the R2-Series excavator lineup, the Bobcat® E88 delivers durability, performance and quality for more productivity. Technically speaking, it's a compact machine, but it brings big performance with its redesigned engine and optimized lift performance, plus undercarriage and counterweight improvements. All these enhancements make this excavator one of the highest-performing models in its size class. With impressive over-the-side lift capacity, you can dig with greater confidence over the side of the machine. Put it to the test against similar models from other manufacturers. You'll see that the E88 can outwork the competition.