Is your heavy equipment ready to meet the demands of the peak season? As temperatures rise, the transition from winter's cold to spring's warmth introduces a unique set of challenges for hydraulic systems.

Cold weather thickens hydraulic fluid, while warmer temperatures can decrease its viscosity and stress cooling systems. The reality is that a significant portion of costly in-season breakdowns are not random events — they are the direct result of inadequate preparation.

The spring hydraulic maintenance checklist

Follow these steps methodically to ensure your hydraulic systems are prepared for the demanding season ahead.

1. Conduct a thorough visual inspection

Your eyes are one of the most powerful diagnostic tools you have. A detailed visual inspection can uncover issues before they escalate into catastrophic failures.

Hoses and lines: Look for any signs of wear, such as cracking, abrasions, kinks, or bulging. Pay close attention to areas where hoses might rub against other components. A simple reinforcement, like a corrugated plastic pipe sleeve, can prevent costly future damage.
Fittings and connections: Check every connection for leaks. A clean machine makes this much easier. Even minor leaks can lead to significant fluid loss over time and indicate a failing seal or loose fitting.
Fluid levels: Inspect hydraulic fluid levels and check for any signs of contamination. Milky or foamy fluid suggests water contamination, while a burnt smell can indicate overheating.

2. Clean equipment and components

A clean machine is easier to inspect and maintain. Dirt, grease, and debris can mask serious problems like hairline cracks or leaks.

Gentle cleaning: Avoid using high-pressure washers near sensitive electronic components, seals, or wiring harnesses. The force can push contaminants into the system and damage delicate parts.
Protect after cleaning: Once the equipment is clean, apply a rust inhibitor to high-wear areas to protect against corrosion.

Address	2527 Westcott Blvd., Knoxville, TN, 37931-3112, US
Fax:	1-800-800-1811
Phone:	1-800-800-1810
Website	baileyhydraulics.com
Follow Us

Bailey International, LLC

Manufacturer

Related Articles (1)

Your essential spring hydraulic maintenance checklist

Share