LeeBoy

Challenger V is a front-mounted self-propelled broom powered by an 80-hp Caterpillar diesel engine with responsive hydrostatic drive. The seven-foot Sweepster brush system makes changing the brush core quick and easy. New joystick controls put all brush functions at the operator’s fingertips and LeeBoy’s brush down-pressure system reduces brush wear and maximizes brush life.

The 25,000-pound LeeBoy 8816 asphalt paver is powered by a 130-hp Cummins turbo diesel engine and features a heavy-duty undercarriage with two-speed hydrostatic drive. The fully equipped consoles incorporate a CAN Bus system and digital gauges for monitoring paver functions and diagnostics. The 8816 features the heavy-duty, heated and vibrating Legend Screed System. The adjustable 8- to 15.5-foot screed can pave up to a six-inch depth of asphalt or base material. It is available with either electric or propane heating systems. The electric screed, powered by an on-board generator, offers consistent temperature control.

LeeBoy’s Rosco brand Tru-Pac 915 pneumatic-tired roller features an articulated design that provides true tracking on turns and full-width compaction, which is especially useful in tight areas. The traditional nine-wheel Tru-Pac 915 has a 68-inch compaction width. All-wheel oscillation increases kneading action during compaction and eliminates floating over low spots for consistent compaction. Frame articulation is rated at +/- 40 degrees, while the tire oscillation is rated at +/- 10 degrees. Powered by an 80-hp Cat diesel engine, the Tru-Pac 915 has hydrostatic wheel-motor drive to provide infin-itely variable control of the roller at speeds from 0 to 15 mph. Ballastable up to 30,500 pounds, each of the nine wheels delivers approximately 3,500 pounds of compactive force directly to the work surface.

The LeeBoy LBC-24W concrete curber is designed as a highly maneuverable, compact curb and gutter machine in an economical package. It has the ability to smoothly and effectively pour a radius as tight as 24 inches. It is built for slipform curb and gutter, alley ribbons and sidewalks up to four feet wide, along with the capability for below-grade pours.

The 117-hp, LeeBoy 705 motor grader provides smooth grading at high and slow speeds with its six-speed forward and three-speed reverse power shift hydrostatic transmission. Right- and left-hand joysticks, integral to the adjustable suspension operator’s chair, control all grader functions. The 10-foot sliding and tilting mold-board – with 18-inch, right- or left-side shift, and shoulder reach of 36 inches – allows the operator to shift the blade in or out of hard to reach areas. Maneuverability of the 705 motor grader is enhanced with 18-degree, right or left articulation behind the cab. This gives the 705 an outside turning radius of 17.5 feet. Grading functions are assisted with front-axle oscillation of 20 degrees, front-wheel lean of 15 degrees and front-wheel steering angle of 50 degrees.

LeeBoy’s Rosco brand Tru-Pac 915 pneumatic-tired roller features an articulated design that provides true tracking on turns and full-width compaction, which is especially useful in tight areas. The traditional nine-wheel Tru-Pac 915 has a 68-inch compaction width.

The LeeBoy 1200S Asphalt Maintainer is a multi-purpose road maintenance unit for repair of utility cuts, potholes, roadway shoulder building, paving, road profiling and road widening.

The 25,000-pound LeeBoy 8816 asphalt paver is powered by a 130-hp Cummins turbo diesel engine and features a heavy-duty undercarriage with two-speed hydrostatic drive. The right and left side operator stations slide-out for improved operator visibility. The fully equipped consoles incorporate a CAN Bus system and digital gauges for monitoring paver functions and diagnostics. Paver steering is by Plus 1 control architecture with touch pads.

The LeeBoy LBC-24W concrete curber is designed to give contractors a highly maneuverable, compact curb and gutter machine in an economical package. It has the ability to smoothly and effectively pour a radius as tight as 24 inches, eliminating most hand forming. It is built for slipform curb and gutter, alley ribbons and sidewalks up to four feet wide, along with the capability for below-grade pours for efficient street rehabilitation work.

Rugged construction and a centre-mounted brush with joystick controls make LeeBoy’s Rosco brand RB-48 broom effective for road applications or cleanup. The RB-48’s versatility is enhanced with tow-package, strike-off blade and curb brush options. RB-48’s 7.5-foot quick-change brush makes changing the brush core easy and quick.