Liebherr redesigns chassis and counterweight for new 8-tonne-capacity mobile crane
The MK 88-4.2E offers reduced axle loads and optional self-ballasting

Liebherr has introduced the MK 88-4.2E mobile construction crane, an updated version of the MK 88-4.1E designed to accommodate road weight restrictions in international markets. The new four-axle crane offers multiple travel configurations, including axle loads of less than 9.2 tonnes and a gross vehicle weight below 36.3 tonnes.
Redesigned chassis reduces axle loads
The MK 88-4.2E retains much of its predecessor's boom system but features a redesigned chassis and counterweight configuration to reduce transport weight. The counterweight is divided into removable sections, and the outrigger beams can also be removed for transport.
The crane offers travel configurations with axle loads of 12 tonnes, 10 tonnes, or less than 9.2 tonnes, depending on the configuration. Wider 445/75 R22.5 tires mounted on aluminum rims also support compliance with road requirements in markets including Australia, Denmark, and the U.S.
An optional self-ballasting system allows the crane to install and remove its counterweight without an auxiliary crane. Depending on the distance to the ballast transport vehicle, the counterweight can be installed in two or three lifts. Ballast cylinders integrated into the chassis allow the complete counterweight to be fitted and removed.
Lifting capacity and manoeuvrability
The MK 88-4.2E offers a maximum lifting capacity of eight tonnes and can lift up to 2,200 kilograms at its maximum boom radius of 45 metres.
The four-axle carrier has a turning circle of 11.88 metres and independent rear-axle steering for manoeuvring on confined construction sites. Liebherr's Load-Plus control system can automatically increase lifting capacity by up to 10 percent.
Electric operation and power options
The MK 88-4.2E can operate electrically using construction site power or an external power source, including Liebherr's Liduro Power Port mobile energy storage system. A diesel generator provides an alternative when external power is unavailable.
The crane includes a standard 16-ampere mains connection in addition to 32- and 63-ampere connections, allowing operation on sites with limited electrical supply, although at reduced operating speeds.
An optional electro-hydraulic system allows operators to deploy the crane's outriggers and install its counterweight using site electricity or an external battery power pack, without producing local CO₂ emissions.
Series deliveries are expected to begin in the second quarter of 2027.
Company info
1015 Sutton Drive
Burlington, ON
CA, L7L 5Z8
Website:
liebherr.com/en-ca/group/start-page-3721612


