Heavy Equipment Guide Logo

Volvo Trucks introduces enhanced turbo compound engine in VNL models

The next generation Turbo Compound engine from Volvo Trucks provides up to an additional 3% improvement in fuel efficiency over the current 13-liter Turbo Compound engine, the D13TC. This new engine delivers up to 11% fuel savings overall compared to model-year 2015 trucks.

Volvo Trucks North America is introducing the next generation of its Turbo Compound technology, providing up to an additional 3 percent improvement in fuel efficiency over the current 13-litre Turbo Compound engine, the D13TC. This new engine delivers up to 11 percent fuel savings overall compared to model-year 2015 trucks. Other improvements include enhanced efficiency over a wider range of applications, more engine ratings and a new EE Extra Efficiency drive mode. The new D13TC will be available for order in the fourth quarter of 2019 and go into production at the end of the first quarter of 2020.
 
"We developed our first generation of the Turbo Compound engine in 2017, and since then almost 300 million miles have been logged, validating the up to 8 percent fuel-savings benefits," said John Moore, product marketing manager at Volvo Trucks North America. "This new D13TC builds upon this game-changing engine technology, further increasing fuel efficiency by up to 3 percent over the current D13TC engine, saving approximately $1,200 per year per truck, based on the average fuel price and 125,000 miles per year."
 
Volvo Trucks' new D13TC offers three individual drive modes, Dynamic Torque, an additional 405 horsepower rating, and the next evolution of the Volvo Trucks' patented wave piston design. These updates enable further-increased fuel efficiency over a wider range of loads, vehicle speeds and engine RPMs. This offers a broader use of applications compared to the first generation of the D13TC engine, which was designed specifically for over-the-road, long-haul applications for trucks loaded at 80,000 pounds.
 
The three individual drive modes available with the new D13TC engine are Extra Efficiency, Economy, and Performance. These modes will allow the driver to better optimize fuel efficiency for the vehicle with desired performance, depending on application, topography and driving conditions. This new engine also features a wider RPM efficiency band, which enables top fuel efficiency for longer periods of time.
 
Dynamic Torque is an incremental torque system designed to provide the right torque at the right time. Rather than operating in silos of high-torque and low-torque modes, Dynamic Torque automatically sets a torque level dependent upon the weight of the truck, the grade and the road conditions at any given time. Dynamic Torque also features an automatic 12th gear lockout on heavy loads with Adaptive Gearing engine ratings. A kick-down switch along with performance drive mode allow access to full torque for customers requiring it on demand. This simpler, more effective system on the new D13TC engine will provide an even more consistent improvement in fuel efficiency across different applications, enabling customers to cut costs on a wider range of operations.
 
The new engine also features a revised wave piston, designed and patented by Volvo Trucks. The improved design optimizes wave technology to evenly distribute the air/fuel mixture in the cylinder, burning the fuel more consistently than a traditional piston. Volvo's design increases the compression ratio from 17:1 to 18:1 while maintaining up to a 90 percent reduction of soot in the cylinder, further improving fuel efficiency in the engine.
 
"The individual drive modes allow drivers new heights in fuel efficiency without sacrificing performance. We are also taking it to the next level with a simpler torque package that delivers the right torque at the right time," said Moore. "Not only is it cutting edge when it comes to sustainable use of diesel in the transportation industry, but it is the most fuel efficient Volvo engine on the market for our customers, with trucks running cleaner at a reduced cost.

Company info

P.O. Box 26115
Greensboro, NC
US, 27402-6115

Website:
volvotrucks.us

Read more

Related products

More from Trucking

Uber brings freight business to Canadian market

Uber Freight has announced its expansion to Canada with plans to facilitate seamless domestic and cross-border loads. This is the company's first North American expansion and comes on the heels of Uber Freight's recent European expansion to Germany, the Netherlands and Poland, as the company continues to scale its global operations.

New transmission, new partnership with Freightliner launched by Allison

Allison Transmission, the largest global manufacturer of medium- and heavy-duty fully automatic transmissions, announced, in partnership with Freightliner Trucks, the launch of the new Allison 3414 Regional Haul Series (RHS) transmission during the North American Commercial Vehicle Show. Freightliner Trucks is the first company to release the Allison 3414 RHS, an uprate variant of Allison's proven 3000 Series.

Edmonton technician becomes first woman to earn Kenworth's highest service certification

The personal interests that develop at an early age are often the ones that will last a lifetime. From fixing equipment on the farm with her father, to becoming the first woman in the Kenworth dealer network in Canada and the United States to achieve the prestigious Kenworth Certified Master Technician status, Jennifer Lesnik always knew she had the skillset to work on heavy equipment as a profession.

Calculating the true costs of heavy-haul trailer ownership

With a cost on par with the average home mortgage, heavy-haul trailers represent a significant investment for businesses. The right trailer can provide fast ROI, greater productivity and increased profits. The wrong decision, however, can leave trucking companies with the financial burden of a unit that will cost far more in the long run than the business is prepared to take on.  

Subscribe to our free newsletter

Get our newsletter

Learn more

FUSO Class 5 FE 180 GAS cabover production kicks off

Mitsubishi Fuso Truck of America, Inc. (MFTA) announced that production of the industry's first Class 5 cabover gasoline-powered work truck has begun at the Freightliner Custom Chassis Corporation (FCCC) plant in Gaffney, South Carolina. FCCC is a sister company within Daimler Trucks. This truck adds to the lineup of FUSO's already popular Class 4 gasoline models introduced in 2018.

Rapidly evolving trucking industry diversifies with top female talent

The trucking industry is the backbone of our economy, relied upon to safely and efficiently transport goods that support daily needs. In fact, the trucking industry is the single largest mover of freight and is expected to carry nearly 22 billion tons in 2029, a 35 percent increase in freight volume from today. Women are now making up more and more of the industry demographic, challenging stereotypes and making notable contributions across every link of the value chain.

Daimler Trucks North American alternative energy efforts earn 2019 Clean Air Technology nod

Daimler Trucks North America LLC has been recognized with the 2019 Clean Air Technology award from the South Coast Air Quality Management District (South Coast AQMD). DTNA was recognized for its Innovation Fleet from Freightliner, a 30-vehicle fleet of battery electric medium- and heavy-duty trucks currently testing integration of battery electric commercial vehicles into large-scale transportation operations.

Autocar releases new concrete mixer and concrete pump truck models

Autocar Trucks has announced the launch of two truck models purpose-built to serve the concrete and construction industry: the Autocar DC-64M, for concrete mixers, and the DC-64P for concrete pump applications. The Autocar DC is a completely new conventional truck engineered from the ground-up for severe-duty vocational applications. Autocar's guiding mission is to build trucks to be "Always Up" - that is, to stay in service despite the challenges they face, year-after-year. The Autocar DC-64M and DC-64P bring several notable innovations that make them uniquely suited for their respective vocations.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

NTEA training module focuses on vehicle powertrains

To support employee education and training in the work truck industry, NTEA has developed a Truck Equipment 201 module covering commercial vehicle powertrains. TE201 is intended as a series of online course modules, designed for those with technical knowledge seeking deeper understanding of specific topics outlined in TE101 — the introductory course released by NTEA in 2017. This powertrain module — the second TE201 course — will help expand understanding of the vehicle powertrain by reviewing horsepower and torque, engine function and alternative propulsion, power and torque transfer by the transmission, and driveline and axle.

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Automated trucks hit public roads as Daimler Trucks starts testing

Daimler Trucks and Torc Robotics are actively developing and testing automated trucks with SAE Level 4 intent technology on public roads. The initial routes are on highways in southwest Virginia, where Torc Robotics is headquartered. All automated runs require both an engineer overseeing the system and a highly trained safety driver certified by Daimler Trucks and Torc Robotics. All safety drivers hold a commercial driver's license and are specially trained in vehicle dynamics and automated systems.

3D printing technology finds place improving quality at Volvo Trucks factory

Volvo Trucks North America is utilizing 3D printing technology to produce tools and fixtures used in the manufacturing process at its New River Valley (NRV) plant in Dublin, Virginia, where all trucks for the North American market are built. The implementation of 3D-printed manufacturing tools enables quicker production and continuous quality improvements.

Subscribe to our free newsletter

Get our newsletter

Learn more

Dynamic maintenance service further improves Volvo Trucks uptime

Volvo Trucks introduces dynamic maintenance, a connected vehicle maintenance service which seeks to improve fleet operations efficiency through proactive and flexible vehicle-specific maintenance planning. The service is designed in partnership with Noregon Systems, an IoT (Internet of Things) company specializing in connected vehicle solutions.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more