Heavy Equipment Guide Logo

Philippi-Hagenbuch rear eject bodies engineered to tackle sticky situations

A volvo dump truck
The tailgate on a rear eject body operates on the same hydraulic system as the ejector blade and automatically opens and closes during operation.

Company info

7424 W. Plank Road
Peoria, IL
US, 61604

Website:
philsystems.com

Read more

Featuring safety, stability and increased productivity as hallmarks of its design, Philippi-Hagenbuch's patented line of Rear Eject Bodies offer the ideal solution for challenging hauling applications from general/road construction, waste and recycling, sand/gravel to mine reclamation and underground hauling situations where overhead barriers inhibit traditional dump bodies. 

Easily adaptable to any make and model of articulated off-highway truck as well as a number of rigid frame trucks, PHIL Rear Eject Bodies curtail the challenges associated with traditional dump bodies. In eliminating the need to raise the body of the truck, the PHIL Rear Eject series allows for safely dumping materials while in motion and in the presence of overhead barriers. This versatility in operation increases efficiency without reducing stability by providing a lower center of gravity and allowing dumping on downhill slopes and conditions with a soft footing. Enabling trucks to spread material while driving further enhances efficiency. The ability to effectively empty the truck without raising the body augments safety where overhead barriers such as power lines, roof lines or bridges may pose as forgotten safety risks as well as in underground mining applications that have low overhead clearance.

A single hydraulic cylinder operates both the ejector blade and the rear tailgate mechanism.

Without moving or raising the truck bed, the ejector blade pushes material toward the rear of the truck, while the tailgate lowers down and material is completely ejected. The unique sweeping action of the blade virtually eliminates all material - even that material prone to sticking to the sides or floor of the truck bed. This effective dumping action provides for more dumps in less time significantly increasing jobsite productivity.

PHIL Rear Eject Bodies are also versatile enough to be used as auxiliary feeders within quarries and mines, providing an alternative tool for delivering material to a crusher or asphalt plant if a primary feeder malfunctions or breaks down.  

Continuing the company's long-held vision of designing solutions that improve productivity while minimizing maintenance, PHIL Rear Eject Bodies are constructed with a single hydraulic cylinder used to operate both the ejector blade and the rear tailgate mechanism. As the ejector blade moves to the rear of the body, the tailgate mechanism located in the sides of the body begins to move to the rear of the truck. This motion, naturally supplemented with gravitational forces, lowers the tailgate simply and mechanically without the need for additional hydraulic cylinders. To further simplify the design, PHIL ejector bodies employ exclusive ejector guides integrated into the inside of the body, which provide smooth operation, while eliminating rollers that typically break or bind. Additionally, the bodies are constructed of high strength, abrasion-resistant steel to withstand years of use with little maintenance. 

Because there are no external rails or guides for the ejector to move on, the Rear Eject Bodies provide enhanced ease of loading and increased capacity. Incorporating customer feedback and more than two decades of experience, Philippi-Hagenbuch eliminated all grease points with the exception of one - only requiring lubrication once a year. 

More from Trucking

NTEA training module focuses on vehicle powertrains

To support employee education and training in the work truck industry, NTEA has developed a Truck Equipment 201 module covering commercial vehicle powertrains. TE201 is intended as a series of online course modules, designed for those with technical knowledge seeking deeper understanding of specific topics outlined in TE101 — the introductory course released by NTEA in 2017. This powertrain module — the second TE201 course — will help expand understanding of the vehicle powertrain by reviewing horsepower and torque, engine function and alternative propulsion, power and torque transfer by the transmission, and driveline and axle.

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Automated trucks hit public roads as Daimler Trucks starts testing

Daimler Trucks and Torc Robotics are actively developing and testing automated trucks with SAE Level 4 intent technology on public roads. The initial routes are on highways in southwest Virginia, where Torc Robotics is headquartered. All automated runs require both an engineer overseeing the system and a highly trained safety driver certified by Daimler Trucks and Torc Robotics. All safety drivers hold a commercial driver's license and are specially trained in vehicle dynamics and automated systems.

3D printing technology finds place improving quality at Volvo Trucks factory

Volvo Trucks North America is utilizing 3D printing technology to produce tools and fixtures used in the manufacturing process at its New River Valley (NRV) plant in Dublin, Virginia, where all trucks for the North American market are built. The implementation of 3D-printed manufacturing tools enables quicker production and continuous quality improvements.

Dynamic maintenance service further improves Volvo Trucks uptime

Volvo Trucks introduces dynamic maintenance, a connected vehicle maintenance service which seeks to improve fleet operations efficiency through proactive and flexible vehicle-specific maintenance planning. The service is designed in partnership with Noregon Systems, an IoT (Internet of Things) company specializing in connected vehicle solutions.

Subscribe to our free newsletter

Get our newsletter

Learn more

Volvo Trucks introduces enhanced turbo compound engine in VNL models

Volvo Trucks North America is introducing the next generation of its Turbo Compound technology, providing up to an additional 3 percent improvement in fuel efficiency over the current 13-litre Turbo Compound engine, the D13TC. This new engine delivers up to 11 percent fuel savings overall compared to model-year 2015 trucks. Other improvements include enhanced efficiency over a wider range of applications, more engine ratings and a new EE Extra Efficiency drive mode. The new D13TC will be available for order in the fourth quarter of 2019 and go into production at the end of the first quarter of 2020.

Philippi-Hagenbuch invents new positive seal tailgate for truck bodies & containers

Philippi-Hagenbuch Inc. has invented a new version of their Autogate Tailgate specifically for off-highway trucks and roll-off containers that require a 100% positive seal. This new design can be paired with PHIL's proprietary fluidic seal material to create a water-tight seal that contains liquid materials within an off-highway truck body or roll-off container when environmental regulations or local laws make even slight spillage undesirable.  

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

PTO output boosted on diesel-powered 2020 Ford Super Duty chassis cab

New on the 2020 Super Duty Chassis Cab, Ford is proud to offer Power Takeoff (PTO) as standard with its 6.7-litre Power Stroke turbo diesel engine for auxiliary power needs on commercial vehicles. Combined, the 6.7-litre Power Stroke and all-new TorqShift 10-speed heavy duty automatic transmission with the power takeoff provision delivers best-in-class stationary torque of up to 300 lb.-ft. for commercial vehicle bodies that require direct-to-component or hydraulic body motor power. That's 50 lb.-ft. more than the closest competitor.

Service trucks take repairs on the road

Downtime is a curse word among contractors, but the fact is that it's hard to avoid it sometimes. When a machine or truck suffers a breakdown on the job, the need to haul that asset back to the shop just means that downtime is extended.

New GMC Sierra AT4 All Mountain gets Stampede kickoff

The 2019 GMC Sierra 1500 AT4 All Mountain made its official debut leading the  2019 Calgary Stampede Parade. The Sierra All Mountain takes GMC's signature bold design and innovative engineering excellence to new heights, adding tank-like tracks that help it navigate rugged, snow-covered off-road terrain.

Mack GuardDog Connect activated on 100,000th Mack Truck

Mack Trucks reached a significant milestone in its connected truck journey by building the 100,000th truck equipped with its Mack GuardDog Connect integrated telematics solution. Mack GuardDog Connect, which was first launched in 2014, is a proactive diagnostic and repair planning solution that monitors a truck's critical fault codes that could lead to unplanned downtime, and is also the enabling technology for Mack Over The Air remote software and parameter updates.

$400 million plant investment to boost quality for Volvo Trucks customers

The Volvo Group has announced plans to invest nearly $400 million over six years to upgrade the New River Valley, Virginia plant that produces all Volvo trucks sold in North America.  The upgrades include expansion of the industrial footprint and installation of a variety of state-of-the-art equipment that will improve plant efficiency and deliver even higher product quality for customers.

Subscribe to our free newsletter

Get our newsletter

Learn more

Volvo Trucks to introduce next iteration of Active Driver Assist in VNR, VNL & VNX models

Volvo Active Driver Assist (VADA) 2.0, a comprehensive collision mitigation system, will be made standard in the new Volvo VNR and VNL models, and available on VNX models, later this year. The system enhances the original VADA platform by integrating radar and camera capabilities to help drivers maintain a safe following distance through alerts and improved traffic awareness, as well as emergency braking to reduce the risk of collisions.

Evolution of Waste Industry Exhibit unveiled at Mack Historical Museum

The Mack Trucks Historical Museum unveiled an all-new exhibit titled "Keeping America Clean: The Evolution of the Waste Industry." The exhibit, which features three antique Mack trucks and an interactive visitor education display, was made possible thanks to support from Mack Trucks and Republic Services, an industry leader in recycling and waste disposal and longtime Mack customer. A brief ribbon-cutting ceremony was held to officially open the exhibit.

Partnership aids Volvo Trucks in behaviour prediction for trucking industry

Recently Volvo Trucks North America, along with automated vehicle software provider Perceptive Automata and customer Dependable Highway Express (DHE), showcased a collaborative innovation project designed to strengthen safety capabilities for the trucking industry through automation. This project leverages human intuition artificial intelligence that reads the intention and awareness of vulnerable road users such as pedestrians, cyclists, and motorists, to enhance the situational awareness of truck drivers.

Mack Trucks’ RoadLife 2.0 debuts with double feature

Mack Trucks is doubling down on the debut of RoadLife 2.0 with the launch of two episodes on roadlife.tv. Featuring the grueling efforts of Alaska Department of Transportation (DOT) snowplow drivers to clear one of the snowiest highways in the U.S., to the challenge of building a modern logistics business from the ground up, RoadLife 2.0 picks up from last season, sharing the stories of everyday people doing extraordinary things. 

Ford's latest chassis cab offers more capacity in a smaller package

When Ford held its annual press event at the Work Truck Show this past March, nobody was expecting a brand-new nameplate to be introduced - but that's just what happened, and buyers will be able to take advantage of that surprise addition to the company's chassis cab line in 2020.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more