Heavy Equipment Guide Logo

New tooth system from Volvo gives buckets something to chew on

Volvo’s new tooth systems has a longer life and higher penetration
Volvo’s new tooth systems has a longer life and higher penetration

Aimed at Volvo's larger excavators and wheel loaders, the new generation Volvo Tooth System features higher penetration, longer life - and an easy ‘hammer-less' fitting system.

Volvo Construction Equipment's medium and large wheel loaders and excavators now have more to smile about - an all new premium tooth system that not only increases productivity and fuel efficiency, but is also more wear resistant and much easier to fit, thanks to its hammer-less pin design.

Offered for Volvo wheel loaders between L60 to L350, and for Volvo excavators from 14 tonne capacity up to its largest 95 tonne machine, the new tooth system digs deeper and stays sharper for longer. The low profile design offers greater penetration capability and higher bucket fills, offering quicker cycle times and as much as an extra 20% more penetration over the life of the tooth - boosting productivity and extending effective tooth life. The design also features a more self sharpening design, further helping to reduce fuel consumption.


The new tooth system helps to distribute stress while working

Fitting geometry

Protected welding, stronger adaptor nose and clever design helps give the system added robustness, while the system's greater durability means longer change intervals and reduced bucket wear. Because they are designed exclusively for these Volvo machines, the teeth and adaptors are specifically matched to the specification, size and model of machine. 

Featuring smooth surfaces in critical areas, the new tooth system helps to distribute stress while working. With the optimum balance of wear protection and weight, the tooth system has been engineered to unlock the potential of these machines - delivering maximum performance, breakout force and uptime.

The teeth and adaptors are specifically matched to the specification, size and model of machine

The ultimate in wear parts, even the best teeth need to be replaced eventually, but changing teeth with Volvo's new generation tooth system couldn't be easier - or faster. A true hammer-less system, the teeth feature a new locking system that has a reusable locking pin. Offering excellent fit and retention - and an auto-tightening effect once fitted, the reusable pin locks into place simple by twisting it a quarter turn. Taking just a few minutes, installation couldn't be simpler - place, push and twist - that's it.

The right tooth for the task

There are five types of tooth available for the excavators: general purpose, abrasive material & rock, pick point, twin pick and spade nose. There are two adapter types offered, and also an optional mechanical wear cap available, which fits on the standard adapter and extends tooth life further. For wheel loaders there are three types of tooth available - general purpose, abrasive material and rock, along with three types of adapter.  

Related Articles

Sponsored Brought to you by: Bobcat Company Logo

THE BOBCAT E88: STRENGTH IS ON YOUR SIDE

As one of the latest models in the R2-Series excavator lineup, the Bobcat® E88 delivers durability, performance and quality for more productivity. Technically speaking, it's a compact machine, but it brings big performance with its redesigned engine and optimized lift performance, plus undercarriage and counterweight improvements. All these enhancements make this excavator one of the highest-performing models in its size class. With impressive over-the-side lift capacity, you can dig with greater confidence over the side of the machine. Put it to the test against similar models from other manufacturers. You'll see that the E88 can outwork the competition.

Learn more