Heavy Equipment Guide Logo

This ad will close in 15 seconds

Allmand Bros. introduces new portable air compressor and generator models

Maxi-Air™ 100, 375DP and 400 Portable Air Compressors are designed with a heavy-duty, oversized rotary air screw end to run at lower RPM for longer life and improved fuel efficiency.
Maxi-Air™ 100, 375DP and 400 Portable Air Compressors are designed with a heavy-duty, oversized rotary air screw end to run at lower RPM for longer life and improved fuel efficiency.

Allmand Bros., Inc., a subsidiary of Briggs & Stratton Corporation and a manufacturer of high-performance portable jobsite equipment, is pleased to announce the launch of its Maxi-Air 100, 375 and 400 Portable Air Compressors and Maxi-Power 65 and 150 Mobile Generator in booth #6341 at the ARA Show February 17 - 20 in Anaheim, California. 
 
"The new portable compressor and generator products expand our portfolio of heavy-duty, reliable job site equipment," says Brett Shive, Sr. field service technician, Allmand. "We're already seeing high-demand for these five new products, and we're excited to offer our customers in the rental industry a complete, versatile fleet of compressor and power options." 

Maxi-Air 100, 375DP and 400 Portable Air Compressors are designed with a heavy-duty, oversized rotary air screw end to run at lower RPM for longer life and improved fuel efficiency. Developed for ease of use and with easy starting, all compressors are equipped with a Tier 4 Final engine and deliver powerful airflow in all climate conditions. The new Maxi-Air 100 provides a solution for niche industry demands where a smaller compressor is required. On the opposite end of the spectrum, the new 375DP and 400 meets high-pressure application demands. The 375DP is designed with a flexible dual pressure design. "Whatever job our customers are running, we now have a compressor to meet that need," said Shive. 

The new Maxi-Power 65 and 150 Mobile Generators are built with a durable, oversized alternator for easy motor starting. Delivering 65 and 150 kVA prime power, the units are equipped with a Tier 4 Final engines, and has a deep-sea controller for easier diagnostic readings. With a frequency switch for flexibility of jobsite power needs and 15-inch tires for longer wear and greater towing capabilities, the 150 is a critical addition to Allmand's generator offerings and enables customers more options for right-sizing their jobsite power. 

Allmand also recently announced a plant expansion at its Holdrege, Nebraska, headquarters, to improve its ability to meet customer demand. The expansion increases production capacity and speed-to-market with new innovations and includes five new assembly lines, a prototyping lab, a new paint system and robotic weld cells, and enhanced technologies infrastructure. It is expected to be complete at the end of 2019. 

Along with the new generators and compressors, a rendering of the new plant expansion, a Maxi-Heat Burner and several Allmand light tower products, including the new Night-Lite E-Series will also be on display in the booth. 

The new Maxi-Power™ 65 and 150 Mobile Generators are built with a durable, oversized alternator for easy motor starting. Delivering 65 and 150 kVA prime power, the units are equipped with a Tier 4 Final engines, and has a deep-sea controller for easier diagnostic readings.

More from Light Equipment

Vermeer stump cutter makes chumps of tough stumps

Vermeer has introduced the new SC382 stump cutter. This powerful, compact machine comes equipped with a 37-hp (27.6-kW) EFI Briggs & Stratton Vanguard engine, a redesigned cutter wheel to help optimize performance, four-wheel drive and an optional blade to make cleanup more efficient. The Vermeer SC382 stump cutter boasts the power and maneuverability to take out tough stumps, making it an excellent machine for professional tree care contractors.

Know what utility products can do for you

It's not uncommon to see compact loaders and compact excavators in a contractor's equipment fleet. As utility products become more versatile with the addition of attachment capabilities, an increasing number of contractors are taking a second look at these machines to increase their jobsite productivity.

Hydra-Tech pumps and hydraulic power units can handle demanding tasks

York Fluid Controls partners with many great manufacturers to provide the best pumping products to Canadian businesses.  One of these partners is Hydra-Tech Pumps, which produces variable-speed, hydraulically driven submersible pumps and purpose-built hydraulic power units.  Hydra-Tech dedicates itself to designing and creating quality solutions.   

Atlas Copco’s Smart Air Controller for large air compressors gives users powerful insights

Atlas Copco Power Technique North America is launching a new Smart Air Xc4004 controller on all of its large air compressors and boosters with flows up to 4,500 cfm and pressures up to 5,000 psi. The innovative and powerful controller increases the efficiency of operations by providing powerful insights and features an easy-to-use interface that puts users in full control. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Wacker Neuson offers the first battery-powered, zero emissions plates

Wacker Neuson is introducing the first battery-powered single direction vibratory plates offering zero-emissions compaction. The AP1850e and AP1840e series offer a new solution for contractors and rental centres looking for a cordless, emissions-free plate compactor for a variety of applications. These plates are ideally suited for use in new commercial interior or indoor renovation projects, poorly ventilated areas such as trenches and tunnels and projects with strict emission and noise guidelines, as well as traditional soil and asphalt compaction applications.

Xylem to to show new pump solutions at bauma

Xylem Inc. will showcase its latest innovations at bauma. New and improved products under Xylem's powerful portfolio of tough dewatering and flood protection pumps is set to redefine toughness for the mining and construction industries, allowing customers across Europe to dig deeper and build bigger.

Wacker Neuson enhances its G70 mobile generator

Wacker Neuson's new G70 mobile generator, powered by a Tier 4 Final Kohler engine, is a prime powered generator designed to withstand the rigors of repeated transport and continuous load. The compact, sound-attenuated model provides single and three-phase power for construction, commercial, industrial and special applications where quiet power is needed.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Husqvarna's new K 535i power cutter offers easy starts and battery-powered flexibility

The latest addition to Husqvarna's battery-powered range, the Husqvarna K 535i battery power cutter, builds on its fuel- and electric-powered equivalents, while adding benefits such as low vibrations, low weight and user-friendly ergonomics to the mix. It's almost maintenance free and offers a low cost of ownership. And on top of that, it can easily be used for wet cutting.

Perkins debuts expanded line of worldwide engines

Perkins Engines is showcasing its expanding line of high-performance, power-dense diesel engines that meet both U.S. EPA Tier 4 Final and EU Stage V emission standards at World of Concrete 2019. Featured in booth C6781 is the Perkins Syncro 2.8 litre, the 9.3 litre 1706J and the 1204J, which are among the latest additions to Perkins industry-leading global product range covering 8.2 to 597 kW (11 to 800 hp).

Vanguard exhibits new 200 and 400 single-cylinder engines at World of Concrete 2019

Vanguard will display the new Vanguard 200 and 400 single-cylinder engines, the first two models in an all-new single-cylinder horizontal shaft commercial engine line, at World of Concrete in booth O31418. The new engine line was developed around key areas of performance critical to improving overall productivity — including starting, maintenance intervals, service and support, and total cost of ownership.

Generac Mobile LINKTower to shine bright at the Rental Show

Generac Mobile's LINKTower – the portable, linkable, zero-emission LED light tower – now packs more lighting punch. New, more powerful 235W LED fixtures provide long-lasting and efficient illumination. The LED light fixtures are impact-resistant and are backed by a five-year limited warranty. They have 39 percent more lumen output then previous light fixtures and have 32 percent more coverage. It will be on display at the Rental Show 2019. 

Hilti cordless combihammer has strongest and highest-capacity battery available

Hilti is advancing tool technology with the introduction of a new cordless SDS max combihammer, the TE 60-A36. Powered by the strongest and highest-capacity battery available, the TE 60-A36 drills faster than any corded combihammer in the same size class on the market. Hilti says that it delivers up to twice the work per charge as current competitor cordless solutions, allowing users to get the most demanding jobs done even faster.

Powr2 launches hybrid energy system

Powr2 has launched their latest energy technology, Hybrid Energy Systems (HES). This sustainable equipment will help power rental companies expand their markets, cut maintenance and fuel costs, improve efficiency and reduce emissions. In addition, the technology will help extend generator life and increase resale value.

Subscribe to our free newsletter

Get our newsletter

Learn more

Bosch Wet/Dry Dust Extractor helps users meet OSHA silica dust regulation compliance

The Bosch GAS20-17AH Wet/Dry Dust Extractor is an industrial-grade powerhouse with a maximum 300 cfm (cubic feet of air per minute) capacity that filters fine dust, coarse dirt and liquids. The GAS20-17AH boasts 17-gallon capacity, and auto filter cleaning with HEPA filter to provide a complete package in helping users move toward OSHA silica dust regulation compliance. Its auto filter-clean system activates every 15 seconds and the HEPA filter captures 99.97 percent of particles at 0.3 microns and larger.

Yanmar to debut additions for its UTV lineup

YANMAR America is proud to announce the 2019 YANMAR BULL Series Utility Task Vehicle lineup is expanding to include the all new YANMAR diesel Brahma model, plus a new eye-catching gas-powered special edition Longhorn (6 Passenger) UTV in the popular Black Angus trim and color scheme.

New technology and equipment on display at Hilti Innovation Day

From cutting concrete to checking heights, contractors have a wide range of products to help them be more efficient and safe on the job site thanks to recent releases by Hilti. The company hosted its annual Innovation Day for media and displayed new and recent introductions, as well as a look into the future at a few innovations still on the drawing board.

Caterpillar offers two new utility vehicles with room to seat five

Last year, Caterpillar announced the introduction of its first-ever Cat utility vehicles – the gasoline-powered Cat CUV82 and diesel-powered CUV102 D. To expand that offering, the product line now includes the gasoline-powered Cat CUV85 and diesel-powered CUV105 D. The CUV85 and CUV105 D both feature a spacious second row to accommodate a total of five people. Caterpillar gathered extensive customer and dealer input to build a UTV that delivers the unrivaled combination of durability, comfort and maintenance simplicity. Rigorous vehicle testing ensures both utility vehicles meet the superior quality and reliability customers expect from Caterpillar.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more