Heavy Equipment Guide Logo

Superior Industries to significantly increase footprint at bauma 2019

Superior Industries to significantly increase footprint at bauma 2019

Company info

315 East State Highway 28
Morris, MN
US, 56267

Website:
superior-ind.com

Read more

Related products

Superior Industries Inc., an American-based manufacturer and global supplier of bulk material processing and handling systems, says its presence at bauma 2019 will be three-times larger than previous editions of the world's largest trade show. Today, the builder of crushing, screening, washing and conveying equipment unveiled its display plans.

Inside Hall B2 at stand 107, Superior plans to showcase its brand new Alliance Low Water Washer. The one-of-a-kind technology allows crushing operators to wash fines within their crushing circuit. It saves from transporting the fines to a separate wash site, which requires costly trucks and harmful re-handling of the material.

Available for production rates of 90 – 272 mtph (100 – 300 tph), the Alliance Low Water Washer accepts a dry feed from the crushing circuit. An agitator converts the material to a slurry before an integrated dewatering screen removes excess water, leaving as little as eight percent moisture in the discharged manufactured sand. Superior says existing units have required as little 45 – 90 cubic metres/hour of water (200 – 400 gpm), depending on production rates. That's significantly less water consumption than a traditional screw or cyclone.

In addition to wet processing equipment, Superior is planning to showcase a group of conveyor components. Included in this display are:

  • Chevron Pulley: Invented at Superior in 2007, this unique v-shaped wing pulley deflects oncoming rocks and other material, which prevents it from trapping between the pulley's wings. No rocks in your pulleys means longer lasting conveyor belts and pulleys.
  • Moxie Roll: Made from a composite blend, this steel alternative idler sheds sticky material to maintain properly tracked conveyor belts. The rolls are 50 percent lighter and at least three times quieter than steel.
  • High Performance DT Idler: For improved performance in high-capacity applications, the double tube (DT) design features inner and outer tube construction for increased rigidly and better bearing insulation.
  • Exterra SFL Dual Belt Cleaner: This one-of-a-kind conveyor belt cleaning solution is a primary and secondary scraper sharing one mounting pole. This allows for quick, uncomplicated installation. Tension is set just once – at installation – and automatically maintained for the life of the blade.

In addition to these products, Superior plans to showcase videos and presentations of all its products including crushing, screening, washing and conveying equipment for bulk processing and handling of materials in quarries, mines, and marine and rail terminals. A dozen product and applications experts will be available throughout the duration of the bauma.

More from Aggregates & Quarries

Kleemann innovations for crushing and screening plants provide simple and safe operation

Modern crushing plants have become more and more complex as their requirements rise. At the same time, the technology must be safe and as simple as possible to operate – and without lengthy instruction and familiarization periods. This is the challenge which faced Kleemann. At bauma 2019 Kleemann showcased innovative solutions for the safe and simple operation of crushing and screening plants. 

Haver & Boecker expands global mineral processing presence with Haver & Boecker Niagara brand

Haver & Boecker has established its global brand Haver & Boecker Niagara to combine the engineering expertise and product portfolios of its three mineral processing locations in Brazil, Canada and Germany. In the past, the three locations acted individually for their respective regions and territories. Customers around the world will benefit from shared innovative technology, more in-depth consultations, greater parts availability and better delivery times.

New Pitbull Grizzly screen an economical option for small- to mid-sized contractors

Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.

Multiple washing spreads impress at McCloskey customer open day event

Washing equipment specialist McCloskey Washing Systems (MWS), along with their UK dealer MaxInnovate Ltd, held its first multi-spread demonstration event, at Monk Plant Hire (MPH) in Hockering, Norwich, UK on Wednesday 20th and Thursday 21st March, highlighting the power of the washing equipment working together. The demonstrations were an integral part of events tailored to familiarize both new and established dealers and customers with the versatility and productivity of MWS latest products. 

Terex Finlay introduces 883+ triple shaft heavy duty screener

Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications. 

free-paper-airplane

Get our newsletter

Learn more

Metso launches hybrid truck body with unmatched payload and wear life

"Hauling is one of the most cost-intensive components of a typical mining or quarrying operation. In addition to fuel and labor, there's plenty of maintenance involved too. To ensure cost efficiency, a haul truck should carry as much payload as possible on every round. At Metso, we set out to tackle this challenge and designed a truck body that requires minimal maintenance while maximizing payload. The result is a lower operating cost per hauled ton," says Lars Skoog, Vice President, Mining Wear Lining & Screening, Metso.

Keestrack extends worldwide manufacturing

Keestrack prides itself in consistently developing its worldwide manufacturing capacities. The company, which at bauma celebrated its 10,000th production machine since the legendary "4518" was introduced in 1996, is also marking the completion of its new 8740-square-metre assembly complex, the second extension phase of its main factory in Šternberk, Czech Republic. More milestones and new extension projects will be set and started in 2019, including the opening of Keestrack's Indian assembly in Neemrana and new production capacities in Ponzano Veneto, Italy.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Site planning with drones

Aggregates operators are always looking for ways to improve their efficiency and make more informed decisions in their planning processes. Many are adopting emerging technology as an added way to develop their operations, and the advent of drones is playing a large part.

Volvo CE demonstrates fully electric future for emission-free quarries

Volvo Construction Equipment's Electric Site project aims to test the world's first "emission-free" quarry by electrifying each transport stage, from excavation to primary crushing, and transport to secondary crushing. It uses both electric and autonomous Volvo CE prototype machines, plus new machine and fleet control systems and an entirely integrated real-time site management system. Together, these form a complete Electric Site solution. Volvo CE and its customer Skanska tested the viability of the Electric Site research project for 10 weeks at a Skanska's Vikan Kross quarry near Gothenburg, Sweden. Heavy Equipment Guide staff were on site to see the operation and learn about the results. 

Keestrack optimizes electric drive technology

Keestrack offers today the most versatile range of hybrid and plug-in solutions in mobile processing technology for quarrying and recycling applications. This applies to the complete product range, from screening plants and stockpile conveyors to mobile track-mounted crushing solutions of all relevant technologies and for all production capacities.

ROCKSTER to present most powerful, low-emission mobile impact crusher at bauma 2019

Since its founding in 2004, ROCKSTER has developed two patented systems for mobile crushers. At bauma 2019, the mobile impact crusher R1100DS will be displayed in the open area in front of the B2 Hall / Gate 7 (Booth No. 12B/2). The machine combines both innovative systems (DUPLEX and double-functional return / stockpile belt) and as of 2019, it will be equipped with a CAT C9.3B EUR5 engine. This will offer customers the latest state-of-the-art technology.

Telsmith 3244 portable crusher delivers a mobile advantage

The Telsmith 3244 Portable Plant provides the portable crushing producer consistent, reliable production, low mobilization costs, and the flexibility in a number of processing applications such as producing quarried stone, sand and gravel, and recycling. The 3244 primary jaw plant can be used alone or configured with other mobile plants to create a complete processing system in aggregates processing.

free-paper-airplane

Get our newsletter

Learn more

Powerscreen of Canada to show latest crushing and screening plants at National Heavy Equipment Show

Powerscreen is one of the world's leading providers of mobile crushing, screening and conveying equipment. Official distributors, Powerscreen of Canada will exhibit at the National Heavy Equipment Show in Toronto, from March 28-29th, 2019. Exhibiting at booth number 5004, experts will be on hand to talk crushing and screening and visitors will have the opportunity to get up close to a Powerscreen Chieftain 2200 screen.

After record year in 2018 Rubble Master looks to continued growth

2018 marked the most successful year to date for RUBBLE MASTER. With record sales and an export quota of 97% RUBBLE MASTER continues to hold their status as a market leader in Compact Crushing and Screening. The company says its  continued success comes from higher product demand, healthy expansion in global markets, and new screening products.

Using recycled aggregates for roadbuilding is the way of the future – time for many to catch up

Municipalities are responsible for the care and maintenance of vast amounts of roadway, from alleys to highways. When those roads are repaired or replaced, there's the potential to generate a significant amount of aggregate material - concrete and asphalt removed from the old surface that must be dealt with.

Bridgestone brings portfolio of OTR tire solutions to AGG1

Bridgestone Americas, Inc. will exhibit its integrated portfolio of off-the-road (OTR) products, technologies and services at the National Stone, Sand and Gravel Association Aggregates Academy and Expo (AGG1) and World of Asphalt 2019 Show and Conference, Feb. 12-14 in Indianapolis, Indiana. Located at booth 31089, Bridgestone will showcase the benefits of using products backed by integrated technologies to drive increased productivity for customers.

New sidewall protection for OTR tires designed for concrete and aggregates recycling

At concrete and aggregate recycling sites, recycled aggregate is produced by crushing concrete and asphalt to reuse the aggregate in the construction industry as a base for roads or building foundations.  To keep operations running site managers rely on loaders to push large jagged chunks of torn up sidewalk, roadway or building materials - which can contain steel rebar - to the crushing line to reduce its size.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more