Heavy Equipment Guide Logo

Kleemann high-performance MR 130 Zi EVO2 impact crusher shown at AGG1 2018

Kleemann's MR 130 Zi EVO2 and MR 110 Zi EVO2 mobile impact crushers can be equipped with optional, highly productive secondary vibrating screen with extra-large screening surface mounted on the discharge conveyor.
Kleemann's MR 130 Zi EVO2 and MR 110 Zi EVO2 mobile impact crushers can be equipped with optional, highly productive secondary vibrating screen with extra-large screening surface mounted on the discharge conveyor.

Company info

6030 Dana Way
Antioch, TN
US, 37013

Website:
wirtgen-group.com/america/en-us/products/kleemann

Phone number:
(615) 501-0600

Read more

6737 W. Washington Street, Suite 2400
Milwaukee, WI
US, 53214-5647

Website:
worldofasphalt.com

Phone number:
414-298-4138

Read more

1605 King Street
Alexandria, VA
US, 22314

Website:
agg1.org

Read more

Related products

High-performance and enhanced aggregates processing technology built into Kleemann products like the Tier 4 final Mobirex MR 130 Zi EVO2 impact crusher shown at World of Asphalt/AGG1 2018 in Houston, and the smaller MR 110 Zi EVO2, are boosting productivity and product quality for operators, according to the company.

These mobile impactors can be equipped with optional, highly productive secondary vibrating screen with extra-large screening surface mounted on the discharge conveyor. This secondary screening unit can produce spec material, potentially eliminating the need for a separate screen.

The feeding unit has hydraulically folding hopper walls and locking system, which speeds setup. A vibrating, independent double-deck prescreen between hopper and crusher eliminates fines from the product flow before they ever enter the crusher, reducing wear and cutting fuel costs.

These crushers feature a new inlet geometry, which allows even better penetration of the material into the range of the rotor. Also, the wear behavior of the new C-form impact ledges has been improved to such an extent that the edges remain sharper longer, leading to improved material shape. The rotor ledges are held securely by a new and extremely user-friendly clamping system, which means that they can be changed even quicker, and thus contribute to greater plant uptime.

Outstanding performance is made possible in part by the extremely efficient direct drive, with which the machines are equipped. A latest-generation diesel engine transmits its power almost loss-free directly to the flywheel of the crusher, via a robust fluid coupling and V-belts. This drive concept enables enormous versatility, as the rotor speed can be adjusted in four stages to suit different processing applications.

The Kleemann Continuous Feed System (CFS) manages a more equal loading of the crushing area, in which the conveying frequencies of the feeder trough and the prescreen are adapted independently of each other to the level of the crusher, thus significantly boosting performance.

For the optional version with secondary screen mounted, the oversize gradation return conveyor has been redesigned from the predecessor models, eliminating a vertical bend and integrating the transfer chute at the feed hopper.

New SPECTIVE control system
The MR 130 Zi EVO2 is equipped with the new SPECTIVE control system. SPECTIVE is simple to understand and supports the operator in his or her work. The use of clear symbols makes all plant functions recognizable at a glance. Similar in presentation to a smartphone, the operator is guided by the control system, reducing the potential for operating errors. In addition, data relating to the machine operation can be retrieved via the control system, and the levels of diesel and lube oil, for example, can be viewed in the plant cockpit.

Hydraulic gap adjustment
With these new Mobirex impact crushers, the fully hydraulic adjustment capability of the crushing gap permits greater plant uptime, while improving quality of end product.

Not only can the crushing gap be completely adjusted via the touchpanel electronic control unit, but the calculation of the zero-point is possible while the rotor is running. This ability to accurately set the crusher aprons from the control panel with automatic detection of zero point and target value setting saves time, and improves the overall efficiency and handling of the crusher.

More from Aggregates & Quarries

Kleemann innovations for crushing and screening plants provide simple and safe operation

Modern crushing plants have become more and more complex as their requirements rise. At the same time, the technology must be safe and as simple as possible to operate – and without lengthy instruction and familiarization periods. This is the challenge which faced Kleemann. At bauma 2019 Kleemann showcased innovative solutions for the safe and simple operation of crushing and screening plants. 

Haver & Boecker expands global mineral processing presence with Haver & Boecker Niagara brand

Haver & Boecker has established its global brand Haver & Boecker Niagara to combine the engineering expertise and product portfolios of its three mineral processing locations in Brazil, Canada and Germany. In the past, the three locations acted individually for their respective regions and territories. Customers around the world will benefit from shared innovative technology, more in-depth consultations, greater parts availability and better delivery times.

New Pitbull Grizzly screen an economical option for small- to mid-sized contractors

Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.

Multiple washing spreads impress at McCloskey customer open day event

Washing equipment specialist McCloskey Washing Systems (MWS), along with their UK dealer MaxInnovate Ltd, held its first multi-spread demonstration event, at Monk Plant Hire (MPH) in Hockering, Norwich, UK on Wednesday 20th and Thursday 21st March, highlighting the power of the washing equipment working together. The demonstrations were an integral part of events tailored to familiarize both new and established dealers and customers with the versatility and productivity of MWS latest products. 

Terex Finlay introduces 883+ triple shaft heavy duty screener

Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications. 

free-paper-airplane

Get our newsletter

Learn more

Metso launches hybrid truck body with unmatched payload and wear life

"Hauling is one of the most cost-intensive components of a typical mining or quarrying operation. In addition to fuel and labor, there's plenty of maintenance involved too. To ensure cost efficiency, a haul truck should carry as much payload as possible on every round. At Metso, we set out to tackle this challenge and designed a truck body that requires minimal maintenance while maximizing payload. The result is a lower operating cost per hauled ton," says Lars Skoog, Vice President, Mining Wear Lining & Screening, Metso.

Keestrack extends worldwide manufacturing

Keestrack prides itself in consistently developing its worldwide manufacturing capacities. The company, which at bauma celebrated its 10,000th production machine since the legendary "4518" was introduced in 1996, is also marking the completion of its new 8740-square-metre assembly complex, the second extension phase of its main factory in Šternberk, Czech Republic. More milestones and new extension projects will be set and started in 2019, including the opening of Keestrack's Indian assembly in Neemrana and new production capacities in Ponzano Veneto, Italy.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Site planning with drones

Aggregates operators are always looking for ways to improve their efficiency and make more informed decisions in their planning processes. Many are adopting emerging technology as an added way to develop their operations, and the advent of drones is playing a large part.

Volvo CE demonstrates fully electric future for emission-free quarries

Volvo Construction Equipment's Electric Site project aims to test the world's first "emission-free" quarry by electrifying each transport stage, from excavation to primary crushing, and transport to secondary crushing. It uses both electric and autonomous Volvo CE prototype machines, plus new machine and fleet control systems and an entirely integrated real-time site management system. Together, these form a complete Electric Site solution. Volvo CE and its customer Skanska tested the viability of the Electric Site research project for 10 weeks at a Skanska's Vikan Kross quarry near Gothenburg, Sweden. Heavy Equipment Guide staff were on site to see the operation and learn about the results. 

Keestrack optimizes electric drive technology

Keestrack offers today the most versatile range of hybrid and plug-in solutions in mobile processing technology for quarrying and recycling applications. This applies to the complete product range, from screening plants and stockpile conveyors to mobile track-mounted crushing solutions of all relevant technologies and for all production capacities.

ROCKSTER to present most powerful, low-emission mobile impact crusher at bauma 2019

Since its founding in 2004, ROCKSTER has developed two patented systems for mobile crushers. At bauma 2019, the mobile impact crusher R1100DS will be displayed in the open area in front of the B2 Hall / Gate 7 (Booth No. 12B/2). The machine combines both innovative systems (DUPLEX and double-functional return / stockpile belt) and as of 2019, it will be equipped with a CAT C9.3B EUR5 engine. This will offer customers the latest state-of-the-art technology.

Telsmith 3244 portable crusher delivers a mobile advantage

The Telsmith 3244 Portable Plant provides the portable crushing producer consistent, reliable production, low mobilization costs, and the flexibility in a number of processing applications such as producing quarried stone, sand and gravel, and recycling. The 3244 primary jaw plant can be used alone or configured with other mobile plants to create a complete processing system in aggregates processing.

free-paper-airplane

Get our newsletter

Learn more

Powerscreen of Canada to show latest crushing and screening plants at National Heavy Equipment Show

Powerscreen is one of the world's leading providers of mobile crushing, screening and conveying equipment. Official distributors, Powerscreen of Canada will exhibit at the National Heavy Equipment Show in Toronto, from March 28-29th, 2019. Exhibiting at booth number 5004, experts will be on hand to talk crushing and screening and visitors will have the opportunity to get up close to a Powerscreen Chieftain 2200 screen.

After record year in 2018 Rubble Master looks to continued growth

2018 marked the most successful year to date for RUBBLE MASTER. With record sales and an export quota of 97% RUBBLE MASTER continues to hold their status as a market leader in Compact Crushing and Screening. The company says its  continued success comes from higher product demand, healthy expansion in global markets, and new screening products.

Using recycled aggregates for roadbuilding is the way of the future – time for many to catch up

Municipalities are responsible for the care and maintenance of vast amounts of roadway, from alleys to highways. When those roads are repaired or replaced, there's the potential to generate a significant amount of aggregate material - concrete and asphalt removed from the old surface that must be dealt with.

Bridgestone brings portfolio of OTR tire solutions to AGG1

Bridgestone Americas, Inc. will exhibit its integrated portfolio of off-the-road (OTR) products, technologies and services at the National Stone, Sand and Gravel Association Aggregates Academy and Expo (AGG1) and World of Asphalt 2019 Show and Conference, Feb. 12-14 in Indianapolis, Indiana. Located at booth 31089, Bridgestone will showcase the benefits of using products backed by integrated technologies to drive increased productivity for customers.

New sidewall protection for OTR tires designed for concrete and aggregates recycling

At concrete and aggregate recycling sites, recycled aggregate is produced by crushing concrete and asphalt to reuse the aggregate in the construction industry as a base for roads or building foundations.  To keep operations running site managers rely on loaders to push large jagged chunks of torn up sidewalk, roadway or building materials - which can contain steel rebar - to the crushing line to reduce its size.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more