Connect Work Tools will be adding pulverizers to their product lineup in 2019.
Crushing Attachments Run Down
801 Pleasant View Blvd
7550 Independence Drive
Walton Hills, OH
3453 Durahart Street
1270 Geddes Street
CA, N0B 1X0
Okada America TMB Series Trommel Screening Buckets
The Okada America, Inc. trommel screening bucket (TMB Series) is ideal for screening C&D debris out of soil and sand to make recycling efficient and keep dumping requirements to a minimum. The TMB Series features two-way drum rotation or operation in a single direction with a drum rotation speed that can be fine-tuned. The TMB Series is offered in four sizes for carriers ranging from 6 to 40 tons.
• Compact design is lightweight and easy to operate.
• Built-in control valve regulates flow and pressure eliminates the need for costly plumbing
• Double-acting single pump flow kit also runs a grapple, crusher or shear
• Rotation drum consists of four-bolt-on concave screens that are easily replaced
• Assortment of screen sizes are available from 3/8” to 4”.
This innovative tool integrates a powerful rock and concrete grinder with a digging and crushing bucket to create the most efficient trenching and excavating attachment on the market. This is the go-to tool for trenching in hard or rocky ground to ‘cut and clean’ with a single excavator, eliminating attachment changes or a second excavator. Precision cutting results in as much as 50 percent less excavated volume compared to hammers. Available in the 18-40 ton excavator class.
• Cut, dig, and clean with a single excavator
• Ideal for trenching
NPK Construction Equipment, Inc. M-35 Material Processor
This system utilizes jaw frame pins built into the main frame of the processor along with a quick hitch system on the jaw sets allowing the customer to change from one jaw set to another in about 15 minutes. This improves your efficiency by saving down time in the field when changing the jaws to complete additional processing procedures.
• S jaw set serves as a primary breaker
• G jaw set serves as a pulverizer with replaceable tooth plate
• K jaw set serves as a shear with bolt-on piercing tips
• All NPK Material Processors come with NPK’s exclusive integral hydraulic intensifier system that boosts power by amplifying cylinder pressure and reducing cycle time, while providing a greater power-to-weight ratio
Breaker Technology’s Multisystem MS
The MS Multisystem is a versatile product suitable for both primary and secondary demolition. This attachment consists of a main structure to mount different types of jaws transforming the Multisystem into a dedicated attachment.
• The sturdy hydraulic rotation allows accurate positioning of the attachment in any working environment and in complete safety due to the presence of a double-row thrust bearing.
• Thanks to the two powerful cylinders this attachment releases an enormous force to the tips, while the forged piston rod assures high reliability.
• The high performance of the cylinders is guaranteed by the presence of a speed valve.
Nye Manufacturing Ltd. CPX Concrete Pulverizer
Nye Manufacturing produces a wide range of Ultra Heavy Duty Concrete Pulverizers for machines ranging from 6 to 180 tons. All Nye Concrete Pulverizers are built with three grades of Quenched and Tempered alloy steel for the ultimate combination of strength, toughness and wear resistance.
• Massive torque tubes absorb twisting forces.
• No extra hydraulics required, use existing bucket cylinder for power.
• Simple, Safe and almost silent operation.
• Replaceable wear parts.
• Optional four position ripper shank for picking, prying, lifting and flipping heavy slabs.
AMI Attachments’ Kraken Concrete Pulverizer
The AMI Kraken Concrete Pulverizer is designed specifically to crush concrete methodically and efficiently. The Kraken features a series of replaceable jaw teeth that are welded into place. Longer teeth in the centre of the jaws concentrate pressure across fewer points on the initial crush of concrete while the secondary teeth adeptly crumble the concrete into manageable pieces. The Kraken’s serrated pinch blades are made of Hardox 400 steel and provide the grip and precision required to pick up, hold and carry fine material. The attachment’s nose and heel, made with Bruxite 500 hard-wearing steel, give the operator fine edges for managing concrete slabs, precast structures, walls, bridge decks and asphalt.
• The Kraken’s 3 over 4 jaw configuration delivers crushing strength to push broken material efficiently through the channel
• Oversize hex torque tubes provide a sturdy core the width of the Kraken to prevent twisting and deforming
• The 3-Position bracket allows the lower jaw’s angle to adjust to three different positions
Indeco North America IFP Fixed and IRP Rotating Pulverizers
The unique shape of Indeco pulverizers helps to reduce force variation between start (maximum opening) and finish (minimum opening) operating sequences. This leads to greater efficiency when demolishing materials and reduces both working time and stress transmitted to the excavator. The IFP and IRP Series are particularly suited for primary demolition of buildings, vertical structures, flooring, slabs and external walls as well as recycling applications and secondary demolition of reinforced concrete materials and structures.
• Innovative design to provide better grip, easier handling and enhanced hydraulic energy
• “Regenerative Valve” enables movable jaws to be closed more quickly - shortening cycle times
• Distance between cutters inside the jaws can be regulated so that steel rods inside reinforced concrete can be cut more efficiently
• Wide opening between jaws
• Full 360-degree hydraulic rotation with protection valve ensures material can be held firmly in jaws
More from Attachments
Allu D-Series screener crusher buckets work with wheel loaders, excavators, skid steers and backhoes.
Geith's heavy-duty buckets are suitable for light and heavy construction work as well as more demanding excavating conditions.
John Deere has introduced the GS66B, GS72B, GS78B, GS84B scrap grapple buckets and GR72B and GR84B rock grapple buckets.
Remu's PD-3160 extra-strong screening bucket is designed for the hardest work in the toughest jobsites, including demanding heavy-duty applications such as pipeline construction and trench backfilling.
Allu's screener is for compact base machines such as mini excavators, skid steers and backhoes.
Remu's EE/EP series of screening buckets includes eight different models for loaders and excavators ranging from 3 to 40 tons.
• Exert a maximum pressure as low as 110 bar (1,650 psi) and as high as 250 bar (3,750 psi).
• Offer bucket volumes ranging from 0.15 cubic metres (0.18 cubic yards) to 4.2 cubic metres (5.00 cubic yards).
• Facilitate maximum flows of 25 L/min (6 gal/min) to 235 L/min (60 gal/min).
• Screening areas range from 0.2 square metres (2.2 square feet) to 2.5 square metres (27 square feet).
The Graptor Bucket for excavators and backhoe loaders, from AMI Attachments, is ideal for handling large, heavy objects or grabbing bucketfuls of debris.
TEI's latest hydraulic drifter rock drill pairs with Brokk demolition machine to improve productivity and safety
Brokk has delivered a sleek, low-profile design and impressive power-to-weight ratio with the new MMB326 hydraulic drifter rock drill attachment from . This versatile attachment seamlessly pairs with the Brokk 300 and allows for drilling multiple sizes of holes – up to 3 inches – in concrete, rock and compact soil. The attachment is manufactured with a lightweight, compact TE326 drill head featuring patented technology to improve longevity and productivity.
NPK Construction Equipment (NPKCE), a subsidiary of Nippon Pneumatic Mfg. Co. LTD (NPK Japan), has announced the acquisition of Genesis Attachments LLC (USA), Genesis Holdings (Germany), and Genesis GmbH (Germany).
Kinshofer has expanded its extensive line of excavator attachments with the addition of the KSB-Series hydraulic breakers. The manufacturer announced the breaker series at World of Concrete 2019 with the acquisition of Hammer, an Italy-based manufacturer of demolition, excavation, recycling and material handling attachments.
John Deere has unveiled three new backhoe attachments to complement its full lineup of attachments. The BH9B, BH10B and BH11B were designed for operators handling light construction, agricultural, landscaping or utility work. Similar to other John Deere attachments, these backhoes are ideal for use on John Deere G-Series skid steers and compact track loaders.
Aimed at Volvo's larger excavators and wheel loaders, the new generation Volvo Tooth System features higher penetration, longer life - and an easy ‘hammer-less' fitting system.
Epiroc Bucket Screeners BS 1600 and BS 2200, with service weights of 1,710 kg (BS 1600) and 2450 kg (BS 2200), combine the best of modern design and sturdy construction to bring customers in the recycling and rock excavation business an even more complete solution.
As the global demand for fully automatic coupler systems is rapidly increasing, Genesis Attachments will from now on offer demolition work tools with SQ type adaptor plates directly from factory. The target is to increase productivity and reduce downtime for end users as the interface between work tools and adaptor plates can be made in a more efficient way with optimized hose routings directly from factory.
Engcon is developing its own tilt sensor for the market's most common excavator guidance systems. The new tilt sensor will provide a clear interface, cheaper installation and facilitate support.
Engcon is introducing a new generation of rock and sorting grapples. Engcon is the world's leading manufacturer of tiltrotators – a kind of tilting and rotating quick coupler for excavators. The new grapples will be on display at Bauma.
Fecon introduces the FRS15, the latest addition to their lineup of attachments for 16-24 ton excavators. Made of Hardox Steel, this shear attachment provides a 360° rotation, which gives operators more reach and access to the trees and reduces repositioning of machines. A 29.5" blade opening allows the FRS15 to shear trees to 18 inches in diameter, while an accumulator arm allows gathering and continuous shearing of smaller materials.
Engcon has launched production of the GRD70 grab cassette. Engcon has for some time been alone in producing a unique type of grab cassette. With a simple manoeuver that requires no screwing or manual connection of hydraulics, the excavator operator can connect or disconnect the grab cassette in less than one minute.
Currently available for the 1644 and 1732 high capacity telehandlers, SmartLoad Technology - featured by JLG Industries, Inc. at the ARA Showin Anaheim, California - will be available as an option on all JLG telehandlers over the next 12 months. SmartLoad is an advanced bundle of three integrated technologies that work together to increase operator confidence and optimize productivity. This award-winning system includes automatic attachment recognition, a load management information system and a load stability indicator.
Caterpillar has added the PL161 attachment locator to the Locator series of the Cat Product Link hardware product line. The PL161 locator is the most advanced OEM integrated technology solution for attachment tracking. With the ability to track location and utilization, users can know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement.
Bobcat Company is providing demolition contractors a line of six new, powerful nitrogen breaker attachments covering all Bobcat compact excavators, compact track loaders, skid-steer loaders and mini track loaders. The new Bobcat nitrogen breakers deliver powerful impact energy and are built to high quality standards with a simplified design that makes attachment maintenance easy.
Engcon is introducing an automatic quick hitch for excavators up to 40 tonnes.
Bobcat Company introduces the new Bobcat Bob-Dock system - a cutting edge, hands-free hydraulic attachment mounting system. The Bob-Dock mounting system is designed for strong, easy and repeatable hydraulic connections, without operators leaving the Bobcat compact loader cab.
For Site International is proud to announce the release of their latest design, the SharpBlade.
Cat multi-processors feature quick-change jaws, greater cutting/crushing forces, increased speed, durable design
Three new Cat MP332, MP345 and MP365 models are heavy-duty, high-production tools that accept multiple interchangeable jaws for taking on a variety of specialized demolition tasks. The new models, compared with previous models, can cycle 50 percent faster and generate up to 19 percent greater cutting/crushing forces. An innovative locking system enables a single operator to typically change jaw types in 15 minutes or less, using only standard hand tools. An included stand securely and stably holds unused jaw sets.
- Concrete Cutter: outer jaw cracks concrete, inner jaw shears steel
- Demolition: cracks thick concrete structures
- Pulverizer: crushes concrete, separates rebar
- Shear: cuts structural steel, pipe, cable
- Tank Shear: cleanly cuts tanks or plate steel at right angle on three sides
- Universal: cuts steel and crushes concrete
Okada America, Inc. and Rotar International BV have entered into a joint alliance of their demolition attachment businesses in the North American marketplace, effective January 1, 2019.
John Deere is updating its line of attachments with . The BA72C, BA84C and BA96C angle brooms and the BP72C, BP84C, BR60C, BR72C and BR84C pickup brooms were designed for effortless cleanup in turf, snow and construction applications. Like all Worksite Pro attachments, these angle brooms are optimized to work with John Deere skid steers and compact track loaders. They're also compatible with most competitive models.
K-Tec Earthmovers have released a new accessory for 500+HP tractors to enhance earthmoving operations. The K-Tec Tricerabox is a 14' wide box blade that is mounted to the 3-point hitch on the rear of a tractor. The three functions of the Tricerabox include the leveling blade pulling material forward, ripper teeth sinking down into the soil, and blade backwards for pushing dozing material. The blade is ideal for leveling out uneven cut zones, to prepare a productive loading area for enhanced scraper productivity. It has seven ground ripper shanks that are hydraulically operated to lower and engage the ground for ripping up hard soil or aerating wet jobsites.
The CC 2300 and CC 3100 have all the well-known features that make attachments in the Epiroc Combi Cutter range a popular choice for challenging tasks on demolition sites. They are robust, multi-purpose machines offering low noise, low vibration operation and suitable for practically any kind of primary demolition work. The cutting blades on all versions are replaceable and reversible and the attachments can be equipped with different sized jaws according to requirements.
KINSHOFER offers railway attachments for efficient railway maintenance and repair. The three attachments — the RBS, RBS20 and RBS20HPX — can be used with 12- to 24-ton rail excavators to quickly exchange existing concrete and wooden ties without disrupting the track. The RBS20 can also switch from handling standard mono-block ties to bi-block ties with no modification, thanks to internally and externally fitted pads.
PRINOTH is well known for its crawler carriers but also manufactures a wide range of mulching equipment. Through its Vegetation Management Division, and as a cutting-edge company, where the latest developments and innovations in agriculture and forest management are the top priority, PRINOTH continuously invests in developing high quality products including the introduction of its newest mulching head model, the M450s.
Continuing to expand its offering of job site cleanup solutions, John Deere is introducing the new GS66B, GS72B, GS78B, GS84B scrap grapple buckets and GR72B and GR84B rock grapple buckets into its ever-expanding line of Worksite Pro attachments. The scrap grapple buckets are ideal for scrap handling, recycling center use, disaster cleanup and job site cleanup applications where grappling power is needed to handle material. The rock grapple buckets are perfect for land clearing, job site cleanup and brush removal applications. Additionally, the new rock grapples allow for grading the site after debris removal.
Torwel Limited has announced its new and improved Heavy-Duty Snow Pushers in widths from 8' through 18'. All models boast robust design and upgrades that include adjustable skid/wear shoes and easy to use attachment systems that include the universal skid steer mounting system and the new versatile utility tractor/loader global mounting system.
Case's all-new laser grading box attachment is their first precision-enabled attachment for skid steers and CTLs
Case Construction Equipment has announced the first precision-enabled attachment for Case skid steers and compact track loaders (CTLs) – the new Case Laser Grading Box. Ideal for concrete subgrade, athletic fields, parking lots, driveways, equestrian arenas and other fine-grading applications, the Case Laser Grading Box creates highly precise finish grades to within 1/10th of an inch.
Engcon's new EC233 series tiltrotator has a break torque of 340 kNm (240,771 lbf-ft), making it the market's most powerful tiltrotator built for excavators up to 33 metric tons, according to the company. The EC233 replaces Engcon's EC30, which has been serving Engcon's customers since the mid-1990s.
John Deere continues to provide best-in-class vegetation management with the addition of the MH60D mulching head to its Worksite Pro lineup. Designed to remove 8-inch (203-mm) trees and 12-inch (305-mm) stumps with ease, the MH60D model shreds underbrush and woody materials into beneficial mulch in minutes. Like all Worksite Pro attachments, this mulching head is optimized to work with John Deere skid-steer loaders and compact track loaders, as well as most competitive models.