Volvo Penta is revealing its Stage V concept at CONEXPO/CON-AGG in Las Vegas from March 7-11. As with previous emission steps, the Stage V line-up includes all five engines – D5, D8, D11, D13, and D16 – offering the same power range from 105 to 565 kW (143-770 hp) as Volvo Penta’s existing offer for industrial, off-road applications. A D11 engine and its perfectly matched exhaust aftertreatment system (EATS) are on display to demonstrate the company’s Stage V platform.
Power of solution that is designed and optimized for the customer
Volvo Penta’s new Stage V platform has been optimized to meet the upcoming emission standards, as well as future customer needs. Volvo Penta has taken advantage of proven and mature concepts already existing today across the Volvo Group, and has listened closely to customers to understand their future application requirements. “With our Stage V range, we are focused on delivering an ideal solution for the customer’s actual environment – a solution that is fit for use and will enable our customers to be leading in their respective markets and segments,” says Johan Carlsson, chief technology officer for Volvo Penta.
The new Stage V range ensures installation commonality between different emission levels. The engine program will be consistent, from Stage II to Stage V, which is hugely beneficial for OEMs.
“We are ensuring compatibility with earlier emissions legislations by using the same hardware layout and re-using the electrical architecture to make sure we have consistency across different emission stages,” adds Carlsson. “This means our customers can integrate solutions from across the emission stages at the same time.
“With our Stage V solution, we have continued to cultivate the successful design philosophy used for our current Stage IV/Tier 4 Final range, keeping the highest focus on maximized uptime, minimized fuel consumption and ease of installation, operation and maintenance.”
A complete system with a range of benefits
Designed with ease in mind, Volvo Penta offers a complete system, where the engine and EATS work together in harmony. High efficiency in the EATS has enabled Volvo Penta to deliver reduced complexity of the engine. The end result is that the technology across the Stage V range is optimized for ideal use.
For Stage V, the engine has been equipped with a fixed geometry turbo, which contributes to reduced complexity, improved fuel consumption and increased efficiency. A common-rail injection system reduces noise levels and delivers reduced fuel consumption.
Volvo Penta has selected to use uncooled exhaust gas recirculation (EGR), which delivers highly effective heat management for the engine. An electrical exhaust pressure governor (EPG) and inlet throttle enable the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS. Low heat rejection from the complete system means that less cooling is required. This powerful combination leads to increased efficiency and uptime for the operator.
Regeneration strategy designed for ease of operation
Volvo Penta’s Stage V engine and EATS are designed to work together to maximize passive regeneration during normal operation. If needed, the engine-mounted heat management devices will automatically increase the exhaust temperature. The highly efficient selective catalytic reduction (SCR) technology enables the usage of a low complexity engine with robust design. Additionally, the engine concept ensures that it is easy for the EATS to maintain a favourable temperature during normal operation.
With Volvo Penta’s Stage V approach, there is no high temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the diesel particulate filter (DPF).
Introducing the EU Stage V D11 engine – optimized for performance
On display at CONEXPO/CON-AGG, the new EU Stage V D11, TAD1180-1182VE, is a powerful, reliable, and efficient six-cylinder engine. With power output ranging from 235-285 kW (320-388 hp), the D11 is designed to deliver maximum power and torque at low rpm. This results in optimized performance, including smooth operation, low noise, and world-class fuel efficiency. The D11 is equipped with all the key features of Volvo Penta’s Stage V concept, such as a common-rail injection system, uncooled EGR, as well as an EPG and inlet throttle.
A perfectly matched aftertreatment system
Volvo Penta offers a flexible EATS, securing ease of installation, operation, and maintenance. A modular approach ensures the EATS can be installed in a number of different configurations and positions.
“We are proud to reveal the technology behind our competitive Stage V range,” says Giorgio Paris, head of Volvo Penta’s industrial segment. “I believe we have a market leading offer with our passive regeneration strategy and through our complete system that delivers reduced engine complexity and a highly efficient exhaust aftertreatment system. At the end of the day, this approach translates into increased uptime for our customers, who have been at the heart of our design philosophy.”