Heavy Equipment Guide Logo

This ad will close in 15 seconds

Atlas Copco Dynapac CP1200 pneumatic tired roller with exclusive dual-circuit braking system

The CP1200 tired roller has a flexible steel ballast to evenly distribute the tires for consistent ground pressure in any application, from finishing to sealing.

The CP1200 tired roller has a flexible steel ballast to evenly distribute the tires for consistent ground pressure in any application, from finishing to sealing.

Company info

Sickla Industriväg 19
Nacka,
SE, SE-105 23 Stockholm

Website:
atlascopco.com

Read more

Related products


Atlas Copco’s Dynapac CP1200 pneumatic tired roller enhances efficiency, serviceability, safety and operator comfort while achieving optimal compaction results. The roller’s flexible steel ballast is distributed evenly between tires for consistent ground pressure between the front and rear tires. This also allows the weight to be easily adjusted for optimal performance in any application – from finishing to sealing.

The Tier 4 Final engine reduces 90 percent of particulate matter and 90 percent of Nitrous Oxide Emission (NOx) compared to a Tier 3 engine. The engine produces low levels of ambient noise thanks to thermostatically controlled cooling fans, which allow the operator to easily communicate with crews using a two-way radio. In addition, minimal engine noise lessens the risk of hearing damage for the operator. The CP1200 also is equipped with an ultra-smooth start/stop system so contractors can quickly and easily change directions.

The platform on the CP1200 is spacious and features operator-friendly controls and a swivel seat for optimal visibility from the operator station. This allows the operator to comfortably move from one side of the roller to the other to maintain optimal visibility and avoid having to strain his or her neck to get a clear view of the drum edge. It also gives operators the confidence to work faster. The unit also can be equipped with a cab with Automatic Climate Control, which automatically adjusts the temperature for operator comfort.

Atlas Copco designed the CP1200 with its exclusive dual-circuit braking system that maintains full braking effect even if one circuit is disabled. This feature is critical for projects on inclined surfaces as it safeguards against damage and injuries.

The CP1200 has a compacting width of 5.77 feet and maximum operating weight of 26,400 pounds, which makes it ideal for a variety of applications from finishing to sealing. An optional DCA-A compaction analyzer records the rolling activity and recommends the optimum number of passes based on type of material being compacted, density needed and hours of operation. In addition to achieving the ideal density more quickly, the DCA-A analyzer also records the rolling patterns for analysis and quality assurance.

With an optional air-on-the-run system, operators can adjust the tire pressure during the compaction process. This eliminates the need to manually adjust tire press, which minimizes downtime. The new heat cover wheel also improves compaction results.

The new CP1200 shares many components and sub-systems with other Atlas Copco models so dealers can minimize their parts inventory and save money.

More from Roadbuilding

Efficient fleet management with WITOS FleetView from Wirtgen Group

"A penny saved is a penny earned." WITOS FleetView is a must-have for anyone who takes this old proverb to heart, because with the fleet and service management solution from the WIRTGEN GROUP, users and machine operators have diverse advantages that are worth their weight in gold. An example from the field confirms it: GSI-Asphalt, a medium-sized enterprise in Eging am See, near Passau, Germany, has been using WITOS FleetView for years in conjunction with the SmartService service agreement. While SmartService provides for regular inspections in accordance with the instruction manual, the telematics solution WITOS FleetView additionally supports proactive maintenance planning and a rapid response in the event of faults. Both services guarantee maximum machine availability - enhancing the cost-efficiency and value retention of the machinery.

World premiere of Bell Equipment's B45E 4x4

With the launch of the new Bell B45E 4x4 at bauma, Bell Equipment will add a new model to its range of articulated 4x4 two-axle ADTs. Similar to the sixty-tonner B60E and the smaller Bell B30E 4x4, the new truck is configured to provide a highly efficient and cost-effective transport solution for niche applications in the mining and construction industry.

free-paper-airplane

Get our newsletter

Learn more

Bridgestone brings portfolio of OTR tire solutions to AGG1

Bridgestone Americas, Inc. will exhibit its integrated portfolio of off-the-road (OTR) products, technologies and services at the National Stone, Sand and Gravel Association Aggregates Academy and Expo (AGG1) and World of Asphalt 2019 Show and Conference, Feb. 12-14 in Indianapolis, Indiana. Located at booth 31089, Bridgestone will showcase the benefits of using products backed by integrated technologies to drive increased productivity for customers.

Komatsu America and Bomag distribution partnership paves way to new market opportunities

Bomag Americas, Inc. and Komatsu America Corp. are pleased to announce that Komatsu's six company owned dealerships (Edward Ehrbar, Komatsu Equipment Company, Komatsu Northeast, Komatsu Southwest, Midlantic Machinery and Pine Bush Equipment) have entered into an arrangement for the sale and support of Bomag compaction, milling, paving and reclaiming/stabilizing equipment for roadbuilding and other construction markets. 

Bomag's new paving training programs help operators and companies get the most from their equipment

For asphalt contractors to be successful in today's competitive paving market, paver and roller operators must acquire a deep knowledge of the equipment's features and put this knowledge into practice at the jobsite. With long-time equipment operators retiring at a high rate, the next generation of operators must receive extensive in-depth training on the equipment in order to meet project specifications without costly rework so companies can maximize equipment return on investment.

Asphalt Drum Mixers offers crane-set and self-erect asphalt storage silos

Asphalt Drum Mixers, Inc. offers crane-set and self-erect asphalt storage silos, which are compatible with both the company's own and similar competitive models of asphalt plants. ADM silos are available in many configurations from single self-erecting silo to multiple crane-set silos and several drive-through configurations. Capacities are available between 30 and 300 tons. Custom designs and capacities are also available to accommodate any producer.

Road Dryer RD-1200 safely dries pavement in one pass for paving, surface treatments

The RD-1200XT pavement-drying unit from Greenville, South Carolina-based Road Dryer, LLC, quickly dries asphalt and concrete pavement, allowing crews to pave or apply surface treatments or striping after just one pass. The unit, which blows heated air up to 300° F directly downward through multiple nozzles, eliminates the risk of "flying objects," and allows traffic to flow in nearby lanes — reducing congestion caused by traffic restrictions. Available as a simple-to-operate trailer- or truck-mounted unit, the RD-1200XT can be adjusted for 8-ft to 12-ft (2.4m to 3.7m) drying widths. Because it dries pavement on demand, it provides flexibility for contractors and government agencies to meet timetables by minimizing delays from weather- and project-related wet conditions.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

In-depth report: asphalt pavers

Trends in asphalt paving centre around making it easier and faster to lay down the highest quality pavement. In our latest in-depth report, our panel of experts from five manufacturers take a look at advances and technologies that are available in asphalt pavers, their current level of adoption, the advantages they offer, plus considerations when looking at the purchase of a new machine. 

NC Equipment purchases DYNAPAC’S NEWEST MOBILE Feeder in North America

Segregation - the separation of asphalt mats that can cause headaches for road maintenance crews - is a hot topic in the paving industry as more contracts include clauses regarding this challenging condition. 
As a long-time dealer and rental house serving northern Alberta's asphalt contractors, NC Equipment keeps track of the trends in the industry. As a full-time Dynapac dealer since 2017, it has taken the lead for its customers by bringing in a North American first to help reduce segregation problems on roadbuilding jobs.

​A-1 Sandrock paves the way with recycled asphalt shingles and Terex equipment

With 12 million tons of tear-off roofing material being generated each year in the United States, and increased regulations, the industry demands efficient recyclers. Efficiency is second nature to A-1 Sandrock. The company has rose to the challenge over the last few years, growing their shingle disposal program into a massive operation that's convenient for roofers, communities, North Carolina, and the surrounding states.

free-paper-airplane

Get our newsletter

Learn more

Cat pneumatic compactor in nine- and eleven-wheel models is ideal for all types of asphalt mix

Designed for use on granular materials and all types of asphalt-mix designs, the new Cat CW16 pneumatic (rubber-tire) roller is available as a standard nine-wheel model with a 69-inch (1,754-mm) compaction width or as an optional 11-wheel model with an 84-inch (2,132-mm) compaction width. The CW16 is designed for efficient performance on highways, city streets, county roads, lane additions, industrial sites, overlays, or other mid-size jobs.

Asphalt road preservation package from Neal Manufacturing offers efficiency and quality results

Neal Manufacturing, a Division of Blastcrete Equipment LLC, and a leader in asphalt pavement preservation equipment, offers its Asphalt Road Preservation Package for optimal efficiency and high-quality results on both detail and high-volume sealcoating applications. The package includes Neal Manufacturing's drivable DA 350 dual applicator for quick prep work and sealcoating around curbs and gutters, and its High-Volume Road Maintenance Vehicle that delivers high material output for efficiency on large projects. 

New lightweight Bomag single-direction plate compactor designed to avoid asphalt material pushing, shoving and scuffing

An indispensable tool for repair, maintenance and paving applications, the new Bomag BVP 12/50 A single-direction vibratory plate compactor is specifically designed and equipped for asphalt compaction, expanding the machine's use beyond traditional soil compaction. This asphalt specialist features a base plate specifically designed to avoid asphalt material pushing, shoving and scuffing to deliver a superior finish. The highly wear-resistant cast iron base plate delivers exceptional service life.

Wirtgen Group technologies impress at Intermat

The Wirtgen Group showed of a number of its latest innovations at Intermat this year, all 5 brands were strongly represented: Wirtgen, Vögele, Hamm, Kleemann and Benninghoven.  Visitors had the chance to talk with experienced applications experts from the Group and got up to speed on the latest technologies for the entire road construction cycle while learning more about the Wirtgen Group's extensive range of service offerings. Here is an overview of some of the highlights: 

W 150 CFi with 1800-mm milling drum assembly leads the Wirtgen line-up.

Rubble Master acquires compact screen and crusher manufacturer Maximus

Rubble Master (RM) has acquired Northern Ireland-based screen manufacturer Maximus. Founded in 2004 and employing 120 people, Maximus will complement Rubble Master's existing range of products, helping to satisfy customers and support future growth. According to Rubble Master, for customers and dealers, this acquisition means a full line of crushing, recycling and screening products are now available with the same reliable, lifetime support and complete parts and service support customers have come to expect from their company.

Asphalt Drum Mixers portable and stationary recycle systems boost asphalt plants' cost efficiency

Asphalt Drum Mixers offers four models of portable and stationary recycle systems to enhance asphalt plants' cost efficiency. Recycle systems allow plants to use milled material in hot mix asphalt (HMA). Since recycled asphalt pavement (RAP) is much cheaper than virgin aggregate, the result is a less expensive finished product that maintains the high quality of a pure virgin aggregate mix.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more