Heavy Equipment Guide Logo

Titan by Mack Model Headlines Mack Booth at the National Heavy Equipment Show

Titan by Mack with Lowboy Trailer
Titan by Mack with Lowboy Trailer

Mack Trucks is bringing the biggest Bulldog of them all, the Titan by Mack model, to the National Heavy Equipment Show, March 5-6 at the International Centre in Toronto, Ontario, Canada. The Titan model is engineered to tackle tough logging, lowboy, special permit and severe heavy-haul applications. Powered by Mack’s largest engine, the 16-liter Mack MP10, the Titan model is available with best-in-class torque ratings of up to 2,060 lb.-ft. In addition, Mack booth no. 1240 will feature a twin-steer Mack Granite model equipped with a nine-cubic meter concrete mixer.

Mack truck models featured in the booth will be:

Titan by Mack: Dump trailer tractor, Engine: Mack MP10-565C with 565 horsepower and 1,960 lb.-ft. of torque, Features: Mack FXL20 20,000 lb. front axle; Mack S522 52,000 lb. rear axle

Mack Granite Twin-Steer: Twin-steer concrete mixer, Engine: Mack MP7-405M with 405 horsepower and 1,480 lb.-ft. of torque, Features: Dual Mack FXL20 20,000 lb. front axles; Meritor 46,000 lb. rear axle 

Mack Granite Twin Steer Mixer

Company info

More from Trucking

CHEC tool from Daimler to streamline vocational truck customization

Daimler Trucks North America LLC (DTNA) developed the Custom Hardware and Electronics Configurator (CHEC) tool to streamline the vocational customization process. The CHEC tool enables Truck Equipment Manufacturers (TEM) and dealers to easily view, edit, compare and update electrical configurations in Freightliner vocational trucks, reducing upfit time.

Uber brings freight business to Canadian market

Uber Freight has announced its expansion to Canada with plans to facilitate seamless domestic and cross-border loads. This is the company's first North American expansion and comes on the heels of Uber Freight's recent European expansion to Germany, the Netherlands and Poland, as the company continues to scale its global operations.

New transmission, new partnership with Freightliner launched by Allison

Allison Transmission, the largest global manufacturer of medium- and heavy-duty fully automatic transmissions, announced, in partnership with Freightliner Trucks, the launch of the new Allison 3414 Regional Haul Series (RHS) transmission during the North American Commercial Vehicle Show. Freightliner Trucks is the first company to release the Allison 3414 RHS, an uprate variant of Allison's proven 3000 Series.

Edmonton technician becomes first woman to earn Kenworth's highest service certification

The personal interests that develop at an early age are often the ones that will last a lifetime. From fixing equipment on the farm with her father, to becoming the first woman in the Kenworth dealer network in Canada and the United States to achieve the prestigious Kenworth Certified Master Technician status, Jennifer Lesnik always knew she had the skillset to work on heavy equipment as a profession.

Subscribe to our free newsletter

Get our newsletter

Learn more

Calculating the true costs of heavy-haul trailer ownership

With a cost on par with the average home mortgage, heavy-haul trailers represent a significant investment for businesses. The right trailer can provide fast ROI, greater productivity and increased profits. The wrong decision, however, can leave trucking companies with the financial burden of a unit that will cost far more in the long run than the business is prepared to take on.  

FUSO Class 5 FE 180 GAS cabover production kicks off

Mitsubishi Fuso Truck of America, Inc. (MFTA) announced that production of the industry's first Class 5 cabover gasoline-powered work truck has begun at the Freightliner Custom Chassis Corporation (FCCC) plant in Gaffney, South Carolina. FCCC is a sister company within Daimler Trucks. This truck adds to the lineup of FUSO's already popular Class 4 gasoline models introduced in 2018.

Rapidly evolving trucking industry diversifies with top female talent

The trucking industry is the backbone of our economy, relied upon to safely and efficiently transport goods that support daily needs. In fact, the trucking industry is the single largest mover of freight and is expected to carry nearly 22 billion tons in 2029, a 35 percent increase in freight volume from today. Women are now making up more and more of the industry demographic, challenging stereotypes and making notable contributions across every link of the value chain.

Daimler Trucks North American alternative energy efforts earn 2019 Clean Air Technology nod

Daimler Trucks North America LLC has been recognized with the 2019 Clean Air Technology award from the South Coast Air Quality Management District (South Coast AQMD). DTNA was recognized for its Innovation Fleet from Freightliner, a 30-vehicle fleet of battery electric medium- and heavy-duty trucks currently testing integration of battery electric commercial vehicles into large-scale transportation operations.

Autocar releases new concrete mixer and concrete pump truck models

Autocar Trucks has announced the launch of two truck models purpose-built to serve the concrete and construction industry: the Autocar DC-64M, for concrete mixers, and the DC-64P for concrete pump applications. The Autocar DC is a completely new conventional truck engineered from the ground-up for severe-duty vocational applications. Autocar's guiding mission is to build trucks to be "Always Up" - that is, to stay in service despite the challenges they face, year-after-year. The Autocar DC-64M and DC-64P bring several notable innovations that make them uniquely suited for their respective vocations.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

NTEA training module focuses on vehicle powertrains

To support employee education and training in the work truck industry, NTEA has developed a Truck Equipment 201 module covering commercial vehicle powertrains. TE201 is intended as a series of online course modules, designed for those with technical knowledge seeking deeper understanding of specific topics outlined in TE101 — the introductory course released by NTEA in 2017. This powertrain module — the second TE201 course — will help expand understanding of the vehicle powertrain by reviewing horsepower and torque, engine function and alternative propulsion, power and torque transfer by the transmission, and driveline and axle.

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Automated trucks hit public roads as Daimler Trucks starts testing

Daimler Trucks and Torc Robotics are actively developing and testing automated trucks with SAE Level 4 intent technology on public roads. The initial routes are on highways in southwest Virginia, where Torc Robotics is headquartered. All automated runs require both an engineer overseeing the system and a highly trained safety driver certified by Daimler Trucks and Torc Robotics. All safety drivers hold a commercial driver's license and are specially trained in vehicle dynamics and automated systems.

3D printing technology finds place improving quality at Volvo Trucks factory

Volvo Trucks North America is utilizing 3D printing technology to produce tools and fixtures used in the manufacturing process at its New River Valley (NRV) plant in Dublin, Virginia, where all trucks for the North American market are built. The implementation of 3D-printed manufacturing tools enables quicker production and continuous quality improvements.

Subscribe to our free newsletter

Get our newsletter

Learn more

Dynamic maintenance service further improves Volvo Trucks uptime

Volvo Trucks introduces dynamic maintenance, a connected vehicle maintenance service which seeks to improve fleet operations efficiency through proactive and flexible vehicle-specific maintenance planning. The service is designed in partnership with Noregon Systems, an IoT (Internet of Things) company specializing in connected vehicle solutions.

Volvo Trucks introduces enhanced turbo compound engine in VNL models

Volvo Trucks North America is introducing the next generation of its Turbo Compound technology, providing up to an additional 3 percent improvement in fuel efficiency over the current 13-litre Turbo Compound engine, the D13TC. This new engine delivers up to 11 percent fuel savings overall compared to model-year 2015 trucks. Other improvements include enhanced efficiency over a wider range of applications, more engine ratings and a new EE Extra Efficiency drive mode. The new D13TC will be available for order in the fourth quarter of 2019 and go into production at the end of the first quarter of 2020.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more