The Rx-Series Of Upright Rammers Deliver Well-Balanced And Hard-Hitting Compaction
Doosan Portable Power features three models from its light compaction equipment line of RX-Series upright rammers. The RX-Series is built for the compaction of materials ranging from mixed and cohesive soils to heavy clay.
These models are designed to provide compaction solutions for a wide array of applications, including backfilling and narrow trench compaction such as utility work, trenching, curbing, drainage work, and foundation and masonry base preparation.
The models in the RX-Series are the RX-264H, RX-304H, and RX-344H. This line comes standard with Honda recoil-start, four-cycle engines.
Impact force is applied to the compacted material by a durable wooden foot-reinforced with a heavy steel plate for extended life. The average impact per blow varies on the RX-Series, ranging from 2,600 pounds on the RX-264H to 3,000 pounds on the RX-304H, to 3,400 pounds on the RX-344H. The RX-Series operates at 600–750 blows per minute.
Featuring a low-profile, lightweight design, and a low center of gravity, the RX-Series self-balances, providing greater maneuverability and control around jobsite obstacles. A four-point isolation and vibration-reducing grip, standard on the RX-Series, minimizes operator fatigue and prolongs the life of the rammer components.
Searching for the best-performing excavator? Your search ends here. We tested the Volvo EC350E and EC380E against a leading competitor in three different tests: trenching, truck loading and lifting capacity at reach. The results show a 20% difference in cost-per-ton, a 15% difference in tons-per-hour and a 12% difference in both operating costs and lifting capacity. See the results and put an end to your search for the best excavator.