Heavy Equipment Guide Logo

E-Z Drill

Address 610 Cedar Street, Perry, OK, 73077, US
Phone 405-372-0121
Fax 405-372-1429
Website ezdrill.com

Related Articles

E-Z Drill’s Multi-Gang Slab-Rider Drills Offer Accuracy and Versatility

E-Z Drill offers a line of multi-gang slab-rider drills for accurate concrete drilling from an easily maneuverable machine.  The compact frame design allows each drill to operate in a 4-foot patch while drilling to within 6 inches of a corner. The bits drill to a standard 18-inch depth, and each unit can be adjusted easily to drill into the center of a 24-inch slab. Contractors can adjust the gang spacing between 12 and 36 inches, with greater width settings available through custom orders. 

E-Z Drill’s Parapet Wall Drill for Road Construction Projects

E-Z Drill’s pneumatic, 210 3-parapet wall drill maximizes productivity while drilling vertical holes for a variety of concrete applications, such as securing temporary protective walls along shoulders of bridges and roadways; anchoring temporary traffic barriers; and unique applications, such as maintaining concrete seawalls.

E-Z Drill offers the Model 210 Twin Vertical drill attachment

E-Z Drill offers the Model 210 Twin Vertical, a concrete drill attachment that is compatible with most skid steers and compact loaders. This rock drill system contains two adjustable vertical drills, making it ideal for pulling patches, slab-jacking and under sealing. The unit is designed for maximum productivity and is completely pneumatic, which eliminates the need for electric or hydraulic hook-up.

Reliable equipment needed to meet tough repaving deadline

J McLoughlin Engineering, Inc. had just 140 working days to complete a $45 million contract to replace a 22-mile section of concrete highway. In addition, the work could only be done at night, from roughly 10 p.m. to 5 a.m. This would be a demanding job already, as the size and scope was certainly no small task, but the strict timeline meant the crew had to be especially diligent in working as efficiently as possible. 

E-Z Drill’s multi-gang slab-rider drills

E-Z Drill offers a line of multi-gang slab-rider drills for accurate concrete drilling from an easily maneuverable machine. The series consists of three self-propelled models: the three-gang Model 210-3 SRA, four-gang Model 210-4 SRA and five-gang Model 210-5 SRA. 

Rock drill and core drill in one package

Combining the standard features of the Model 210B SRA with the capability of converting to a pneumatic core drill, the Model 240B SRA caters to both rock drilling and core drilling applications, eliminating the need for a separate drill system. The conversion process requires just a few simple tools and can be quickly conducted while on the jobsite. Featuring totally pneumatic operation, the core drill utilizes a three-speed motor (400, 900 and 1,600 rpm) and requires a minimum of 77 CFM for operation, whereas the standard rock drill configuration requires 100 CFM. The unit can core and drill holes from 5/8-inch diameter up to 2-1/2 inches, and drill up to 18 inches deep.

On-grade concrete drills reach 18-inch depth

E-Z Drill’s line of on-grade concrete drills includes two easily positioned models that drill to a standard 18-inch depth. The Model 210B and Model 210B-2 feature a compact frame, allowing each to operate within a 4-foot area. The units have been specifically designed for straight-line drilling on a level subgrade, and are ideal for airport work, lane additions and large patchwork jobs. Offering third-generation quality, the enhanced single-gang Model 210B can operate within 6 inches of a corner and drill a 3/4-inch hole 9 inches deep in about 15 seconds. The Model 210B-2 also drills within 6 inches of a corner and provides an inexpensive option for a two-gang system. Both units are totally pneumatic, with the 210B requiring 100 cfm and the 210B-2 requiring 200 cfm. An optional vertical conversion kit enhances the series’ versatility, allowing each unit to switch from a horizontal drill to a vertical drill within 20 minutes. As with the complete line of E-Z Drill products, the on-grade drills offer numerous features to increase production and help prevent downtime. Quick-release bit guides correspond with any style of bit for a fast, simple exchange, while vertical height adjustment levels enable each unit to drill on centre whether the slab is 6 inches or 24 inches thick. E-Z Drill’s patented roller bearing feed system eliminates friction while drilling, increasing speed and productivity. Drill carriages can be easily replaced, as needed, with basic tools, and quick coupler air fittings further simplify maintenance. Regulators on the 210B-2 allow the operator to set the optimum drilling speed for each individual drill. Dual-purpose guide wheels on the 210B help with positioning the drill during operation and can be quickly flipped down and used for transporting the unit. Both on-grade models feature components to protect the machine, as well as the operator. Carriage locks secure the drill and bit in place when the air supply is off or disconnected, and auto-lock couplers automatically secure the air supply hose onto the drill coupling so that the connection does not need to be manually pinned. Individual oilers help the drill motor last longer by lubricating each drill from separate reservoirs. A balanced lifting point increases safety during loading and unloading by helping to prevent a load shift, and lifting handles provide proper leverage to lessen any injury risk while increasing productivity.

Concrete drills

E-Z Drill’s line of on-grade concrete drills includes two models that drill to a standard 18-inch depth. The Model 210B and Model 210B-2 have been specifically designed for straight-line drilling on a level subgrade. The enhanced single-gang Model 210B can operate within six inches of a corner and drill a 3/4-inch hole nine inches deep in about 15 seconds. The Model 210B-2 also drills within six inches of a corner and provides an inexpensive option for a two-gang system.

Rock drill/core drill combo

E-Z Drill introduces a new concept in concrete drills with the Model 240B SRA “combo” drill system. Combining the standard features of the Model 210B SRA with the capability of converting to a pneumatic core drill, the Model 240B SRA caters to both rock drilling and core drilling applications — eliminating the need for a separate drill system. The conversion process requires just a few simple tools and can be quickly conducted while on the jobsite.

Multi-gang slab-rider drills

E-Z Drill offers a line of multi-gang slab-rider drills for accurate concrete drilling from an easily maneuverable machine. The series consists of three self-propelled models: the three-gang Model 210-3 SRA, four-gang Model 210-4 SRA and five-gang Model 210-5 SRA. The compact frame design allows each drill to operate in a four-foot patch while drilling to within six inches of a corner. The bits drill to a standard 18-inch depth, and each unit can be adjusted easily to drill into the centre of a 24-inch slab. Adjustable spacing can be set between 12 and 36 inches, with greater width settings available through custom orders. The pneumatic drills feature an internal regulator to prevent breakage caused by high-pressure spikes.

Subscribe to our free newsletter

Get our newsletter

Learn more