Heavy Equipment Guide Logo

This ad will close in 15 seconds


RockHound Attachments

Related Articles

48C landscape rake

Designed to minimize expensive hand la-bour, while mounting on the smallest compact skid steers and tractors, the RockHound 48C Landscape Rake will till soil, level grades or rake stones to create excellent seed beds. Units require only four to six gpm of hydraulic flow, are only 53 inches wide, and weigh just 520 pounds.

RockHound brushcutter

RockHoundNEWS Attachment’s 40EXT weighs over 1,300 pounds and is designed for professional brush clearing durability. It is built with 250-hp components, such as the cutter drum that is over a half inch thick, mounting ears that are 5/8 inch thick, end plates that are 3/4 inch thick and the abrasion resistant (AR) plate shroud of 3/8 inch. The biggest innovation is the new Extreme hammer knife configuration. This triple knife design gives the best of both a two-pound knife and swinging hammer combined. It cuts more quickly, mulches heavy vegetation into even smaller pieces than the double knife design and has extended knife life by up to 40 percent.

Brush shredder attaches to small excavator or backhoe

RockHound Attachments has added the BrushHound 30 Brush Shredder to its line of attachments. This machine has numerous advantages, including armour plate construction, T1 skid shoes, 18 two-pound blades with a blade cost of only $75 per hour. It features a direct-drive gear-type hydraulic motor that only requires eight gpm at 3,000 psi, and weighs only 550 pounds. This shredder can mount to a mini excavator or compact backhoe.

Brush shredder

The BrushHound 30 Brush Shredder has numerous advantages, including armour plate construction, T1 skid shoes and 18 two-pound blades. It features a direct-drive gear-type hydraulic motor that requires only eight gpm at 3,000 psi, and weighs only 550 pounds. This shredder can mount to a mini excavator or compact backhoe.