Heavy Equipment Guide Logo

This ad will close in 15 seconds


Breaker Technology Inc.

Address 3453 Durahart Street, Riverside, CA, 92507, US
Phone (951) 369-0878
Fax (951) 369-8281
Email fcargould@rockbreaker.com
Website rockbreaker.com

Related Articles

Crushing Attachments Run Down

The Okada America, Inc. trommel screening bucket (TMB Series) is ideal for screening C&D debris out of soil and sand to make recycling efficient and keep dumping requirements to a minimum. The TMB Series features two-way drum rotation or operation in a single direction with a drum rotation speed that can be fine-tuned. The TMB Series is offered in four sizes for carriers ranging from 6 to 40 tons.

Secondary breaking

The MRH pedestal-mounted, hydraulic breaker system is designed to provide secondary breaking of oversize materials at grizzlies and crushers in the quarrying industry. The MRH uses the same pedestal as the TM-series rockbreaker, so it can be interchanged easily and field replacement is easier. The 1.5-inch-thick base plate is stronger, allowing for more robust mounting to structures. The MRH now features a tilt and lift valve stand, which provides easy accessibility to swing cylinders and eases hose maintenance. The swing post weldment has a wide opening to accept the inner boom, reducing swing torque pressure to the pin and making the unit better able to transmit torque to the boom pin. Breaker Technology, Inc. #1796

Secondary breaking of oversize materials

The MRH pedestal-mounted, hydraulic breaker system is designed to provide secondary breaking of oversize materials at grizzlies and crushers in the quarrying industry. The MRH uses the same pedestal as the TM-series rockbreaker, so it can be interchanged easily and field replacement is easier.

Hydraulic pulverizers

The MCP Series of hydraulic pulverizers are rugged yet lightweight, and are ideal for secondary demolition and for the recycling of concrete. These units can be used to demolish concrete floors or low-wall, and provide the benefits of low noise and vibration, good fragmentation and good separation of steel wire from concrete material. Replaceable teeth are easy to change in the field. These units also feature a ripper shape design which allows operators to easily grab material on the ground or in a pile. Also, an open fixed jaw allows material to pass through and increase production, and a fixed mounting allows for handling of loads that are not centred. Models are available for carriers from 39,700 pounds to 99,200 pounds. Units feature jaw depths from 27 inches to 35.4 inches (685 mm to 900 mm), and production capacities are from 80 tons to 200 tons per hour in non-reinforced concrete, and up to 35 tons per hour in reinforced concrete post (up to four-foot diameter).

High-powered breaker with extra-long stroke design

The BXR150 hydraulic breaker, at 15,000 foot-pounds, is designed for rugged, continuous duty and offers an extra- long-stroke design which improves the power-to-weight ratio. This provides a wide carrier range (120,000 to 220,000 pounds), and precise tolerances between the piston and cylinder, allowing high efficiency, blow rate and power. Plus, large cross-section upper and lower shock absorbing isolators reduce vibration feedback to the carrier. BTI’s exclusive front-head-restraint system tightly guides the front head within the housing, reducing loading to the tie rods and the upper portion of the breaker. A narrow box housing design is well suited to tight conditions.

MCP Series hydraulic pulverizers

The MCP Series of hydraulic pulverizers are designed rugged and lightweight, and are ideal for secondary demolition and for the recycling of concrete. These units can be used to demolish concrete fl oors or low-wall, and provide the benefits of low noise and vibration, good fragmentation and good separation of steel wire from concrete material.

Breakers designed for high-speed percussion

Designed for stable high-speed percussion, Breaker Technology’s BT Series of Hydraulic Breakers include large diameter, high-strength tie rods, a sealing system, smooth piston finish, and a piston chamber designed for long seal life and optimal lubrication.

Powerful hydraulic shears

The SH series of hydraulic shears is designed to provide a powerful and efficient means for cutting steel beams and rebar, crush concrete, as well as pick up and sort various materials.

Powerful hydraulic shears

The SH series of Hydraulic shears is designed to provide a powerful and efficient means for cutting steel beams and rebar, crush concrete, as well as pick up and sort various materials.

free-paper-airplane

Get our newsletter

Learn more