Heavy Equipment Guide Logo

Thompson Pump & Manufacturing, Co. Inc.

Address P.O. Box 291370, 4620 City Center Drive, Port Orange, FL, 32129, US
Phone 386-767-7310
Fax 386-761-0362
Website thompsonpump.com
Follow Us
Related products
See all

Related Articles

Thompson Pump sells rental operations to United Rentals

A new chapter in the life of an established company is beginning for Thompson Pump & Mfg. Co. following the sale of their rental assets and related operations to the Fluid Solutions Group of industry leader United Rentals. Having divested itself from the direct rental business, Thompson Pump plans to invest in and grow its pump manufacturing operations - the core business that has made Thompson Pump an iconic brand in the industry. 

Automatic priming pump

Thompson Pumps 4JSCG Enviroprime Pump is a high head four-inch automatic priming centrifugal pump that provides flows of up to 1,300 gallons per minute and heads up to 330 feet. The pump handles solids up to three inches and is ideal for sewer by-pass pumping and abrasive applications, emergency flood response, and any other applications that require the transfer of liquids that contain solids. The Enviroprime priming system, unlike most automatic priming systems, prevents product blow-by of pumpage, such as sewage, effluent and waste, from being discharged onto the ground or through hoses that carry the pumpage back to the source, making it environmental friendly. A combination of durable construction and highly efficient pump ends provide longer life and economical operations, and most importantly, lower fuel costs.

Hydraulic submersible pump

Thompson Pump’s hydraulically-driven submersible pump ends and hydraulic power units with automatic start/stop are great for dewatering. They minimize labour costs, allow for considerable fuel savings, and reduce engine wear. The submersible pump ends also eliminate suction lift limitations, allowing pumping in deep excavations, manholes, open pits, quarries or mines. The 32HPU with a 46HST handles solids up to three inches, has a maximum capacity of 1,580 gallons per minute and pumps efficiently at heads up to 115 feet. Designed to run dry without damaging components, these models are constructed from heavy-duty cast iron and steel for durability, high reliability and maximum versatility.

General construction dewatering

ThompsonPump offers a six-inch, vacuum-assisted solids handling pump, the 6V. With a three-inch solids handling capacity, this pump is versatile enough to handle sewage bypass pumping and general construction dewatering. The 6V is capable of flows up to 1,500 gpm and heads up to 102 feet. The unit contains an innovative cooling system that allows the pump to run completely dry without damage.

New software solutions available to health information management professionals

MED2020 Healthcare Software Inc. will be showcasing its growing suite of products at the e-Health Conference in Québec this year. Solutions being offered address the secondary use of applications so that health care facilities can capture, report and analyze health data that supports information sharing, informed decision making and promotes efficient facility operations. MED2020 is known for its flagship product, WinRecs, which is installed in hospital sites across Canada and has evolved into one of the most comprehensive HIM solutions on the market. Offering a broader array of Health Information Management solutions is a result of extensive market research that identified a specific need for content and workflow management tools. A number of technology companies were selected with whom MED2020 could partner and whose vision and philosophy matched that of MED2020. Information and marketing material will be available on exciting new offerings that focus on Document Management, Patient Flow, Business Intelligence and Privacy.

Dewatering/bypass pump

Thompson’s JSC Series Solids Handling ENVI-ROPRIME pump offers heavy-duty cast-iron construction and ability to dry-prime and re-prime automatically. This model is ideal for general construction dewatering and sewage bypass applications. The six-inch pump is designed for flows to 2,500 gallons per minute, maximum heads up to 195 feet, and can handle solids up to three inches. This pump also features the ENVI-ROPRIME compressor-assisted dry priming system which prevents blow-by, such as sewage and waste, from discharging onto the ground, making it environmentally safe.

Atlas Copco’s introduces a new compressor for service vehicles and a new generator for construction and rental

The XAS 185 JDU7 Utility Compressor is designed for cross mounting on service vehicles used for maintenance, road striping, and related activities. It offers easy mounting and dismounting from the carrier but also features two sets of forklift slots on the front and sides as well as a lifting bail for mobility in non truck-mounted applications.

Cold weather pump package

The Arctic Knight is a cold weather package which allows a diesel-driven pump to be used in climates as cold as -40 degrees Fahrenheit. The system eliminates the traditional problems of operating pumps in cold climates such as frozen liquids in the pump, cracked pump housings, and engine starting problems.

Cold weather pump package

The Arctic Knight is a simple and reliable cold weather package which allows a diesel-driven pump to be used in climates as cold as -40 degrees Fahrenheit. The system eliminates the traditional problems of operating pumps in cold climates such as frozen liquids in the pump, cracked pump housings, and engine starting problems. The package also eliminates the need for expensive and often unreliable accessory items such as block heaters, fuel heaters, and glow plugs.

free-paper-airplane

Get our newsletter

Learn more