Heavy Equipment Guide Logo

This ad will close in 15 seconds


Stanley LaBounty

Address 538 Hwy 2, Two Harbors, MN, 55616, US
Telephone 800-522-5059
International + 1 218 834 6700
Fax 218-834-3879
Email [email protected]
Website stanleyhydraulic.com

Related Articles

Mobile demolition processor

Stanley LaBounty’s MDP30R mobile demolition processor features expanded application capability, including higher productivity for large raised concrete structures. The second in the MDP line, the MDP30R incorporates all of the standard MDP features, including a patent-pending quick change jaw pivot, 360-degree powered rotation, reversed cylinder, and multiple machine mount capability.

MDP20R Demolition Processor

Stanley Hydraulic Tools has introduced the LaBounty MDP20R, a midsize mobile demolition processor that separates concrete from steel reinforced bar in seven-second cycles and, according to Stanley, weighs between 900 and 1,700 pounds less than competitive models.

Bucket linkage shears

BLS 2000 and BLS 3000 bucket linkage shears are ideal for cutting lighter structural steel such as I beams, H beams, pipe and rebar, where a larger shear is not required. They feature the patented Saber Series blade system with a 180-degree reversible Saber Tip and lower cross-blade. Tapped cutting blades allow the shear blades to be easily removed. Plus with more bolt-on components, maintenance time is significantly reduced. Units also have an increased amount of high-strength steel in critical areas and increased pin sizes to withstand the high forces generated by excavators. By fully wrapping the pivot group, vital components are protected from damage. The BLS 2000 is designed for use with machines in the 40,000- to 65,000-pound (18- to 29-metric-ton) class and the BLS 3000 is for machines in the 65,000- to 85,000-pound (29- to 38-metric-ton) class.

Key improvements to Saber Lube Series shears

Improvements to Stanley LaBounty’s Saber Lube Series shears include an improved high pressure and high volume grease pump for consistent flow to the various grease points, as well as increased points for more consistent greasing along the entire blade surface, resulting in lower blade wear and better cutting efficiency. An application- specific grease metering system also allows for adjustments (up to three times the original design) in flow to each grease point, depending upon the application.

BLS 2000 and 3000 bucket linkage shears

BLS 2000 and BLS 3000 bucket linkage shears include several key upgrades that improve performance and reduce maintenance. These models feature the patented Saber Series blade system with a 180-degree reversible Saber Tip and lower cross-blade, and tapped cutting blades allow the shear blades to be easily removed. Plus with more bolt-on components, maintenance time is significantly reduced. Units also include an increased amount of high-strength steel in critical areas and increased pin sizes to withstand the high forces generated by excavators. By fully wrapping the pivot group, vital components are protected from damage. BLS 2000 and 3000 shears are very easy to install and do not require additional hydraulics to operate. They are ideal for cutting lighter structural steel such as “I” beams, “H” beams, pipe and rebar, where a larger shear is not required.

Heavy duty grapples

HDR heavy duty grapples are designed for versatility and longevity in demolition, scrap and rock handling, and other applications, with a two tine upper jaw and a three tine lower jaw. Units require no additional hydraulics and pin on in place of an excavator bucket, on carriers from 11 to 109 metric tons.

Rebar cutting shear for excavators

The RCS 80 Rebar Cutting Shear is designed for excavators weighing 70,000 to 100,000 pounds (30 to 45 metric tons) and its design maximizes the power generated from the carrier’s bucket linkage. Staggered blades in the upper jaw hold and process rebar as it bypasses into the lower jaw. This differs from traditional shears that gather material into an apex, which requires more power to process. Blades are bolt-on replaceable and indexible to maximize blade utilization for reduced operating cost. An 18-inch wide upper jaw processes rebar to two-foot minus.

Rebar cutting shear

The RCS 80 Rebar Cutting Shear is designed for excavators weighing 70,000 to 100,000 pounds (30 to 45 metric tons) and its design maximizes the power generated from the carrier’s bucket linkage. Staggered blades in the upper jaw hold and process rebar as it bypasses into the lower jaw. This differs from traditional shears that gather material into an apex, which requires more power to process. Blades are bolt-on replaceable and indexible to maximize blade utilization for reduced operating cost. An 18-inch wide upper jaw processes rebar to two-foot minus.

Subscribe to our free newsletter

Get our newsletter

Learn more