Diesel-engine-driven welding generator
For job sites needing strong generator power or better E7018 Stick electrode performance, Miller Electric has introduced its new Bobcat250 Diesel engine-driven welding generator. Powered by a three-cylinder, liquid-cooled Kubota diesel engine that produces 19 hp at 3,600 rpm, the Bobcat 250 Diesel offers a fully-enclosed case, super-tough “protective armour” on the front panel and an Accu-rated 10,000 watts of useable peak generator power.
Under a continuous load of 4,000 watts of generator power, the Bobcat 250 Diesel can run for about 17 hours.
The Bobcat 250 Diesel provides Stick, MIG, flux cored and AC/DC TIG welding outputs with a duty cycle rating of 100 percent at 250 amps/25 volts (40 to 250 amp, 17 to 28 volt range).
Under a continuous load of 4,000 watts of generator power, the Bobcat 250 Diesel can run for about 17 hours.
The Bobcat 250 Diesel provides Stick, MIG, flux cored and AC/DC TIG welding outputs with a duty cycle rating of 100 percent at 250 amps/25 volts (40 to 250 amp, 17 to 28 volt range).
