Wacker Neuson SM60 and SM120
Powered by a 26.5-hp Kohler gasoline engine, the Wacker Neuson SM60 utility track loader fits smaller job sites with 7.1-inch-wide tracks and an overall machine width of 35.5 inches. It has a travel speed of 3.9 miles per hour, hinge pin height of 75.6 inches, and a rated operating capacity (35 percent of tipping load) of 600 pounds. It weighs in at 2,760 pounds. The larger SM120 has a 24.7-hp Yanmar diesel engine, a rated operating capacity (35 percent) of 1,226 pounds, a hinge pin height of 85.6 inches, and a travel speed of 5.2 mph. It has 11-inch-wide tracks for ultra-low ground pressure and is 41 inches wide. The SM120 also features ride control, providing hydraulic cushioning to the lift arms, reducing material spillage and providing a smoother ride.
Ditch Witch SK1750
The Ditch Witch SK1750 mini stand-on loader has a new track system with a tension check window that allows operators to visually check the track tension without threading a separate gauge tool, making maintenance checks easier. The improved track design makes the machine maneuverable with a smooth and stable ride, even when transporting heavy loads across rough terrain. It also causes less ground disturbance, allowing operators to work more efficiently without the need to spend time repairing damaged turf. An improved roller design means rollers last significantly longer, further increasing reliability and productivity.
Toro Dingo TX 1000 TURBO
The Toro Dingo TX 1000 TURBO has a turbo-powered diesel engine with more torque to deliver power more quickly, especially when using trencher and auger attachments. A larger hydraulic filter extends maintenance intervals for less downtime. The TURBO is available in narrow- and wide-track models (weighing 2,826 and 2,911 pounds). The Dingo TX 1000 TURBO has a rated operating capacity of 1,000 pounds and a pin height of 81 inches with its vertical lift loader arms at full reach. A 24.7-hp Yanmar diesel engine powers the loader, which can travel up to 4.1 mph in both forward and reverse. An auxiliary foot control on the suspended platform allows the operator to focus on ground speed and attachment positioning.
CASE Construction Equipment TL100
The CASE TL100 mini track loader, powered by a 25-hp Kubota diesel engine, has a rated operating capacity of 1,000 pounds (35 percent of tipping load) and a standard auxiliary hydraulic setup (13 GPM, 2,700 psi) providing the versatility to run a variety of tools. Attachments connect through a Common Industry Interface (CII) compatible with most major manufacturers of MTL attachments. The TL100 equipped with narrow tracks weighs 3,536 pounds and is 35 inches wide; with wide tracks, it weighs 3,783 pounds and is 40.4 inches wide. Optional equipment includes a 14-pin front electric connector that includes a hydraulic case drain circuit, additional counterweights, environmentally friendly hydraulic oil, and multiple bucket options.
Company info
131 Savannah Oaks Drive, Building B
Brantford, ON
CA, N3V 1E8
Website:
wackerneuson.com/ca
