Make light work of demanding conditions with Geith heavy-duty buckets

Fecon has introduced a new family of stout deck mulcher attachments that are wider than conventional deck mulchers, providing more productivity per pass, even in the most demanding environments.

When it comes to large scale demolition, Mantovanibenne's combination crushers are ideal tools for tackling reinforced concrete and metal structures. These Italian-made attachments incorporate characteristics of crushers and shears to deliver performance even in the toughest of situations. These crushers' performance comes from the powerful cylinders and the twin pin system that contribute to the breaking and cutting force. The jaws incorporate sharp shear shaped blades that guide the cutting power to be executed in a clean controllable manner for the operator.

Connect Work Tools' CG Series Sorting Grapples are fully rotating, available in four models, and are ideal for industrial demolition and recycling. The durable design offers easy serviceability with 360-degree hydraulic rotation and bolt-on, reversible cutting edges.

Ransome Attachments has been named the first and only distributor of Ditch Doctor attachments in the United States. This unique hydraulic excavator attachment is designed for creating, restoring, and maintaining infrastructure drainage ditches.

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Brokk has launched three new concrete crusher models – the CC440, CC480 and CC580. The attachments, manufactured by Brokk's German sister company, Darda, offer contractors a high-performance tool for Brokk's Next Generation SmartPower series, increasing operator safety and productivity on a variety of tough demolition jobs including top-down and interior demolition.

Gensco Equipment's latest RS and RSM Series hydraulic grabs have been designed to handle C&D debris, rocks, structural scrap, loose bundles and oddly shaped material. Units feature rugged construction and large openings. They are available with an optional, installed 24- or 230V DC Electro-Magnet. Key features of the RS/RMS series include: full 360-degree rotation; dangling adaptor or flex-mount 2-pin quick attach interchangeable hydraulic coupler; optimized and protected cylinders with breaking system; high quality construction with wear-resistant steel, resulting in reduced operational downtime; and easily changeable shovel or digging tips for versatility.

Indeco North America's IMG Series of Multi Grabs (grapples) are designed to meet the most demanding material handling, sorting, recycling and demolition requirements. Featuring five different models in a variety of sizes to accommodate all major excavator brands, the IMG Series now runs on the same hydraulic system as the carrier, a marked improvement over previous models. 

ShearForce Equipment's SP30 Fixed Demolition Pulverizer powerfully crushes reinforced concrete. According to ShearForce, these pulverizers are designed to be a reliable and powerful tool for secondary demolition and recycling of concrete. With its wider jaw, exceptional closing force and short cycle times, the ShearForce SP Fixed Pulverizer provides excellent productivity in concrete reduction and reinforced steel separation. Units feature a speed boosting system for fast cycle times, a bolt-on replaceable one-piece solid tooth system, steel cutting blades in the throat with four usable sides, and a heavy-duty cylinder cover.

Fecon introduces a family of stout deck mulcher attachments that are wider than conventional deck mulchers, providing more productivity per pass, even in the most demanding environments. Ruggedness and dependability are built in, with attention to detailed design to enhance performance, service life, and safety.  A robust bearing carrier houses a heavy-duty bearing with an oversized shaft.  Specially designed two-sided blades effectively double their service life without having to flip the blade.  A stump-jumper feature allows the Deck Mulcher to ride over stumps without risking bolt shearing; the extra blade mass also increases cutting inertia and enhances performance in thicker materials.  New Fecon Deck Mulchers can mulch smaller materials faster than traditional drum mulchers, making them ideal for right-of-way clearing and maintenance projects, forestry clearing, site preparation, land improvement, highway mulching and maintenance, urban interface, and more.

The HDB hydraulic breakers from Hyundai Construction Equipment Americas, Inc. includes 15 different models to fit multiple applications and machine sizes (up to 100 tons).
• A large chisel diameter increases the strength and durability of the chisel; four chisel options are available. 
• For use on a Hyundai excavator, standard equipped mounting brackets match up perfectly with the Hyundai linkage. When used on other excavator brands, Hyundai dealers can fit custom mounting brackets for any machine.
• Large diameter tie bolt for high performance and optimum durability. Hoses connecting the inlet/outlet ports use a new adapter type that avoids bolt breakage and oil leakage.
• Auto-greasing feature protects moving parts from undue wear.

Rammer Series boom-mounted hydraulic hammers by Allied Construction Products reflect over 70 years of experience in high performance, high-efficiency hammers known for exceptional productivity and reliability.
• Mid- and large-range models – designed for carriers from 26,500 to 176,400 pounds – feature advanced hydraulics and deliver high productivity when breaking boulders, removing slag, tunnelling, open pit mining, secondary breaking, and trenching.
• Superior design, including advanced hydraulics and an ultra-strong housing to deliver extended life and greater return on investment. Slip-fit tool bushings for easy replacement.
• Features top-down lubrication, underwater adaptation and a VIDAT System that reduces operating costs, extends operating life and minimizes downtime.

These new nitrogen breakers from Bobcat deliver powerful impact energy and are built to high-quality standards with a simplified design that makes attachment maintenance easy.
• The six models have minimal internal parts, a single lower bushing and easily accessible grease ports. 
• Each of these design features reduces maintenance requirements and makes rebuilds easier.
• The unique valve design of the breakers lessens hydraulic pressure fluctuation, which reduces stress on the carrying equipment's hydraulic pumps.

Connect Work Tools has expanded their attachments for the demolition and construction industries with the addition of the CWP Pulverizer. "The CWP Pulverizer is a great addition to our line of hydraulic attachments. Durability, reliability, and affordability are all traits we demand of our products, and the CWP Pulverizer falls right in line with the rest of our product offerings," indicates Dave Cowen, North American Sales Manager.

A U.S.-based minerals company recently began using an ALLU Transformer M 3-20 material processing attachment in its Middleton, Tennessee, montmorillonite clay mine. The company purchased the mine-duty M-Series screener-crusher attachment from ALLU to use with its Hitachi 650 excavator in order to crush mined clay down to 4-in-minus and simultaneously load haul trucks. The ALLU Transformer is allowing the facility to mine land it could not previously mine, as well as process clay from boulders. The ultimate goal is to eliminate the primary crusher in the plant. The processed material is used for production of cat litter and absorbent clay for oils.

ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.

These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

ShearCore has introduced their new FS145 Mobile Shear, the largest in their product line of attachments for the demolition and scrap recycling industries. Lead Designer, Ross Christenson says "the FS145 shear has been designed with less welds, fewer pieces, and is structurally stronger."

Okada ORC Series rotating pulverizers are designed for both primary and secondary crushing operations.
• Unique double shell-shaped wedge provides exceptional crushing ability.
• Patented Okada speed valve for faster cycle times.
• Reversible 7.1-inch-long cutter blades.
• Hard facing on wear parts.
• Manufactured with Hardox 400 steel.
• 360-degree hydraulic rotation system.
• Bracket design protects components.

SnowEx has introduced its POWER PUSHER TE snow pushers for skid-steers, wheel loaders, backhoes and tractors. Available in 8- and 10-foot-wide models with large carrying capacities, the new snow pushers feature steel trip-edges to deliver cleaner scrapes and help operators get down to the pavement.

The AMI Kraken for excavators features a series of replaceable jaw teeth that are welded into place. Longer teeth in the centre of the jaws concentrate pressure across fewer points on the initial crush of concrete while the secondary teeth adeptly crumble the concrete into manageable pieces.  
• Serrated pinch blades are made of Hardox 400 steel and provide the grip and precision required to pick up, hold and carry fine material.  
• Nose and heel, made with Bruxite 500 hard-wearing steel, give the operator fine edges for managing concrete slabs, precast structures, walls, bridge decks and asphalt.
• Three over four jaw configuration.
• The three-position bracket allows the lower jaw's angle to adjust to three different positions.

This tool from Genesis enables excavator operators to change jaw sets in less than two minutes, without leaving the cab.
• Heavy-duty pivot design is integral to the jaw set, providing a power curve to match the jaw's primary application.
• Reverse-mounted cylinder protects the rod from debris.
• Short, flat-top head with bolt-on bracket shortens the centre of gravity, making it easy to change mounting for different carriers.
• Available in cracker and shear jaw configurations.

These pulverizers from BTI are designed for quiet, controlled demolition and recycling of concrete structures. The concrete pulverizer uses existing excavator hydraulics, so no additional circuits are required.
• Bolt-on replaceable teeth allow for quick change-outs in the field, reducing downtime.
• Each individual tooth is replaceable, saving on parts costs.
• Unique tooth design for outstanding penetration and fragmentation.
• Superior strength with wear-resistant steel for long life and durability.

Rotar's RG sorting/demolition grab is designed for intensive sorting and recycling.
• Double-walled grab trunnion with hardened, over-dimensioned pins.
• Available in open, half-open and closed teeth versions.
• Nine models for carriers 4,000 to 120,000 pounds.
• 0.13-cubic-yard to 1.96-cubic-yard capacities.
• Closing forces from 2,697 to 25,853 ft.-lbs.
• Hardox steel wear-resistant teeth.

Connect Work Tools will be adding pulverizers to their product lineup in 2019.

Allu D-Series screener crusher buckets work with wheel loaders, excavators, skid steers and backhoes. 

The MB Crusher MB-L Series crusher bucket is suitable for skid-steer loaders, wheel loaders and backhoes. 

John Deere has introduced the GS66B, GS72B, GS78B, GS84B scrap grapple buckets and GR72B and GR84B rock grapple buckets.

Remu's PD-3160 extra-strong screening bucket is designed for the hardest work in the toughest jobsites, including demanding heavy-duty applications such as pipeline construction and trench backfilling.

The Okada TMB Series is ideal for screening C&D debris out of soil and sand to make recycling efficient and keep dumping requirements to a minimum. 

Allu's screener is for compact base machines such as mini excavators, skid steers and backhoes. 

Remu's EE/EP series of screening buckets includes eight different models for loaders and excavators ranging from 3 to 40 tons.
• Exert a maximum pressure as low as 110 bar (1,650 psi) and as high as 250 bar (3,750 psi).
• Offer bucket volumes ranging from 0.15 cubic metres (0.18 cubic yards) to 4.2 cubic metres (5.00 cubic yards).
• Facilitate maximum flows of 25 L/min (6 gal/min) to 235 L/min (60 gal/min).
• Screening areas range from 0.2 square metres (2.2 square feet) to 2.5 square metres (27 square feet).

The Graptor Bucket for excavators and backhoe loaders, from AMI Attachments, is ideal for handling large, heavy objects or grabbing bucketfuls of debris.  

Diego Azzolin, production director at MB Crusher, announced a new generation of Shafts Screeners at Bauma 2019.