Heavy Equipment Guide Logo

Doosan Portable Power's latest small air compressor offers 125 psi

The XP185 can simultaneously power both air and electrical tools when outfitted with an optional 4kW generator.
The XP185 can simultaneously power both air and electrical tools when outfitted with an optional 4kW generator.

Company info

1293 Glenway Drive
Statesville, NC
US, 28625

Website:
doosanportablepower.com

Read more

Related products

Doosan Portable Power is expanding its small air compressor lineup with the introduction of the Doosan XP185WDO. This high-pressure model produces 185 cfm and 125 psi, making it ideal for a variety of applications such as general construction, sandblasting, pneumatic tool operation, pipeline testing and fibre optic cable installation.

"Our customers have expressed a need for an air compressor that produces 125 psi and delivers the same productivity and reliability they receive from our popular P185 machine – we're meeting that demand with the new XP185 model," says Jeremy Bailey, air products manager, Doosan Portable Power.

The XP185 can simultaneously power both air and electrical tools when outfitted with an optional 4kW generator. The machine is equipped with two 120V duplex outlets with easy access on the curbside, rear panel of the air compressor.

"Many of our customers are also using small electric or rechargeable battery-powered tools and 4kW of generator power is enough to charge those tools or even a cellphone while on a remote jobsite," says Bailey. 

An onboard toolbox allows for convenient storage of both air-powered and electrical tools for safe transport and easy access on the jobsite.   

Powered by a 74-hp Tier 4 Final–compliant engine, the XP185 provides reliable productivity and fuel efficiency that adds money to your pocket instead of your fuel tank. The high-performance Doosan D24 engine features a diesel oxidation catalyst (DOC) aftertreatment system that is virtually maintenance-free.  

The XP185WDO maximizes jobsite productivity with a 10-hour runtime at 100 percent load. Dependable even in extreme temperatures, the XP185 provides a limited ambient temperature of 125 degrees F, helping to ensure uptime in hot conditions.

The purchase of an XP185 includes a 1-year, 2,000-hour bumper-to-bumper warranty; 3-year, 3,000-hour engine warranty; and 2-year, 4,000-hour airend warranty. An optional 5-year, 10,000-hour Doosan extended warranty is available if genuine Doosan fluids and filters are used at recommended maintenance intervals.

More from Light Equipment

Atlas Copco's latest air compressor designed to save money and time on maintenance

Atlas Copco Power Technique North America (AC) has introduced the XAS 950, a single-stage, oil-injected rotary screw type portable air compressor. Powered by a liquid-cooled six-cylinder turbocharged Caterpillar C7.1 Tier 4 Final diesel engine, this new unit offers simplified maintenance and cost savings by putting the operator in control.

Yamaha unveils 2020 side-by-side models with new special edition lineup

Yamaha Motor Canada introduces all-new Special Edition models for select Proven Off-Road 2020 ATV and Side-by-Side (SxS) vehicles.Boasting superior capability, comfort, and confidence in a variety of terrain, the new Special Edition machines are equipped with stout new radial tires, a WARN winch, advanced suspension, new painted Titanium Bronze / Tactical Black colour scheme, and more.

The future of compaction

Properly done, soil compaction adds many years to the useful life of structures by increasing the foundation's strength. To compact soil in confined areas, vibratory rammers and plates are typically used. Traditionally, these machines have been powered by gasoline and diesel engines; however, due to increasingly strict environmental regulations, rammer manufacturers have been required to engineer new solutions in order to comply to the Environmental Protection Agency's standards. Wacker Neuson redesigned its own two-cycle rammer engine in order to exceed all EPA emissions regulations, but the company didn't stop there

Generac Mobile relaunches indirect flame heater line

Purpose-built with heavy-duty construction in mind, Generac Mobile's new MIH800 and MIH1.2 indirect heaters are designed for reliable performance in the harshest environments. Units are easy to use and maintain thanks to the smart control panel design and the simplified assembly design. Standard safety features protect the unit, the environment and the user.

Vermeer stump cutter makes chumps of tough stumps

Vermeer has introduced the new SC382 stump cutter. This powerful, compact machine comes equipped with a 37-hp (27.6-kW) EFI Briggs & Stratton Vanguard engine, a redesigned cutter wheel to help optimize performance, four-wheel drive and an optional blade to make cleanup more efficient. The Vermeer SC382 stump cutter boasts the power and maneuverability to take out tough stumps, making it an excellent machine for professional tree care contractors.

Know what utility products can do for you

It's not uncommon to see compact loaders and compact excavators in a contractor's equipment fleet. As utility products become more versatile with the addition of attachment capabilities, an increasing number of contractors are taking a second look at these machines to increase their jobsite productivity.

Subscribe to our free newsletter

Get our newsletter

Learn more

Hydra-Tech pumps and hydraulic power units can handle demanding tasks

York Fluid Controls partners with many great manufacturers to provide the best pumping products to Canadian businesses.  One of these partners is Hydra-Tech Pumps, which produces variable-speed, hydraulically driven submersible pumps and purpose-built hydraulic power units.  Hydra-Tech dedicates itself to designing and creating quality solutions.   

Atlas Copco’s Smart Air Controller for large air compressors gives users powerful insights

Atlas Copco Power Technique North America is launching a new Smart Air Xc4004 controller on all of its large air compressors and boosters with flows up to 4,500 cfm and pressures up to 5,000 psi. The innovative and powerful controller increases the efficiency of operations by providing powerful insights and features an easy-to-use interface that puts users in full control. 

Wacker Neuson offers the first battery-powered, zero emissions plates

Wacker Neuson is introducing the first battery-powered single direction vibratory plates offering zero-emissions compaction. The AP1850e and AP1840e series offer a new solution for contractors and rental centres looking for a cordless, emissions-free plate compactor for a variety of applications. These plates are ideally suited for use in new commercial interior or indoor renovation projects, poorly ventilated areas such as trenches and tunnels and projects with strict emission and noise guidelines, as well as traditional soil and asphalt compaction applications.

Xylem to to show new pump solutions at bauma

Xylem Inc. will showcase its latest innovations at bauma. New and improved products under Xylem's powerful portfolio of tough dewatering and flood protection pumps is set to redefine toughness for the mining and construction industries, allowing customers across Europe to dig deeper and build bigger.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Wacker Neuson enhances its G70 mobile generator

Wacker Neuson's new G70 mobile generator, powered by a Tier 4 Final Kohler engine, is a prime powered generator designed to withstand the rigors of repeated transport and continuous load. The compact, sound-attenuated model provides single and three-phase power for construction, commercial, industrial and special applications where quiet power is needed.

Allmand Bros. introduces new portable air compressor and generator models

Allmand Bros., Inc., a subsidiary of Briggs & Stratton Corporation and a manufacturer of high-performance portable jobsite equipment, is pleased to announce the launch of its Maxi-Air 100, 375 and 400 Portable Air Compressors and Maxi-Power 65 and 150 Mobile Generator in booth #6341 at the ARA Show February 17 - 20 in Anaheim, California. 

Husqvarna's new K 535i power cutter offers easy starts and battery-powered flexibility

The latest addition to Husqvarna's battery-powered range, the Husqvarna K 535i battery power cutter, builds on its fuel- and electric-powered equivalents, while adding benefits such as low vibrations, low weight and user-friendly ergonomics to the mix. It's almost maintenance free and offers a low cost of ownership. And on top of that, it can easily be used for wet cutting.

Perkins debuts expanded line of worldwide engines

Perkins Engines is showcasing its expanding line of high-performance, power-dense diesel engines that meet both U.S. EPA Tier 4 Final and EU Stage V emission standards at World of Concrete 2019. Featured in booth C6781 is the Perkins Syncro 2.8 litre, the 9.3 litre 1706J and the 1204J, which are among the latest additions to Perkins industry-leading global product range covering 8.2 to 597 kW (11 to 800 hp).

Vanguard exhibits new 200 and 400 single-cylinder engines at World of Concrete 2019

Vanguard will display the new Vanguard 200 and 400 single-cylinder engines, the first two models in an all-new single-cylinder horizontal shaft commercial engine line, at World of Concrete in booth O31418. The new engine line was developed around key areas of performance critical to improving overall productivity — including starting, maintenance intervals, service and support, and total cost of ownership.

Generac Mobile LINKTower to shine bright at the Rental Show

Generac Mobile's LINKTower – the portable, linkable, zero-emission LED light tower – now packs more lighting punch. New, more powerful 235W LED fixtures provide long-lasting and efficient illumination. The LED light fixtures are impact-resistant and are backed by a five-year limited warranty. They have 39 percent more lumen output then previous light fixtures and have 32 percent more coverage. It will be on display at the Rental Show 2019. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Hilti cordless combihammer has strongest and highest-capacity battery available

Hilti is advancing tool technology with the introduction of a new cordless SDS max combihammer, the TE 60-A36. Powered by the strongest and highest-capacity battery available, the TE 60-A36 drills faster than any corded combihammer in the same size class on the market. Hilti says that it delivers up to twice the work per charge as current competitor cordless solutions, allowing users to get the most demanding jobs done even faster.

Powr2 launches hybrid energy system

Powr2 has launched their latest energy technology, Hybrid Energy Systems (HES). This sustainable equipment will help power rental companies expand their markets, cut maintenance and fuel costs, improve efficiency and reduce emissions. In addition, the technology will help extend generator life and increase resale value.

Bosch Wet/Dry Dust Extractor helps users meet OSHA silica dust regulation compliance

The Bosch GAS20-17AH Wet/Dry Dust Extractor is an industrial-grade powerhouse with a maximum 300 cfm (cubic feet of air per minute) capacity that filters fine dust, coarse dirt and liquids. The GAS20-17AH boasts 17-gallon capacity, and auto filter cleaning with HEPA filter to provide a complete package in helping users move toward OSHA silica dust regulation compliance. Its auto filter-clean system activates every 15 seconds and the HEPA filter captures 99.97 percent of particles at 0.3 microns and larger.

Yanmar to debut additions for its UTV lineup

YANMAR America is proud to announce the 2019 YANMAR BULL Series Utility Task Vehicle lineup is expanding to include the all new YANMAR diesel Brahma model, plus a new eye-catching gas-powered special edition Longhorn (6 Passenger) UTV in the popular Black Angus trim and color scheme.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more