Heavy Equipment Guide Logo

Volvo CE explores the potential for 5G in construction

Volvo CE is currently testing the potential for 5G in powering a remote-controlled wheel loader.
Volvo CE is currently testing the potential for 5G in powering a remote-controlled wheel loader.

Company info

312 Volvo Way
Shippensburg, PA
US, 17257

Website:
volvoce.com

Read more

Related products

In a global first, Volvo Construction Equipment (Volvo CE) is among a small number of pioneering companies trialling 5G mobile connectivity. With the program set to make a big impact on construction innovation, we find out more from 5G expert Calle Skillsäter, Volvo CE's Technical Specialist for Connected Machines.

The 5G partner program by Telia and Ericsson is the first industrial application of 5G, with only a small number of companies across the Nordic countries taking part. For Volvo, it means testing the development of remote-controlled machines and finding out the real-world potential for autonomous solutions.

Calle, what does this trial mean for Volvo CE?

5G allows us to transport data in ways that we could only ever dream about. A faster, more reliable mobile network will mean we're at the forefront of driving a much faster market implementation of technologies like automation. Something that had seemed impossible a few years ago is now a very real opportunity today.

So, what exactly are you testing? And how is the test site laid out?

We have a 25 hectare test site where the remote-controlled wheel loader, the L180H, is located – and a simulator inside a tent about 100m away behind a concrete wall. The test track itself has a number of physical barriers, uphill and downhill tracks and rough terrain – all designed to mimic the real conditions of a construction site. At the moment, the simulator is actually quite close to the machine, but this is only so that we can be near the track to adjust the conditions. There really is no reason that the machine couldn't be located much further afield.

How far?

In 2017, we successfully placed a machine 400m below ground and controlled it from the surface. And when we first tested the technology back in 2015, we had an excavator placed in Eskilstuna and operated from Barcelona. So that tells you the potential for remote operation. And now with the increased latency that 5G provides, it really does mean you can achieve remote operation from extremely far away. But at a certain distance the latency in the network will be significant anyhow.

How long will the trial go on for and what do you hope to achieve?
We will be testing this technology for two years. Over this time, we will see the performance of the network evolve and get better. What is really exciting is that at this very early stage, we are in a unique position to iron out any problems and play a key role in actually influencing how 5G will work for industrial purposes when it is rolled out more widely.

Of course, the goal for us here at Volvo CE, is that we want to make this system so mature and so successful that we can test it with our customers. To see how this technology can function on a real construction site. Hopefully that will be something we can achieve by the end of the trial.

Will you be testing technology out with other Volvo machines?

Absolutely. The aim is that after the initial testing phase with the wheel loader, we will then be able to test it with the HX2 hauler concept machine to see whether it is possible to have a work cycle operated entirely using 5G. In principle, we can then test 5G with six to eight autonomous haulers transporting gravel across the site.

It seems that mining offers some of the best potential for exploring this technology. Why is that?

Mining can be dangerous – either for people operating the machines in remote locations or because of the fumes that are released after blasting rock. But if we can remove people from the site, then we are reducing the risk of accidents entirely. You'll also have the capability to operate several operations and sites from one central location – increasing productivity.

Are there any other sectors that could benefit from 5G automation?

Absolutely, it's not just mining. The forestry industry could certainly benefit, as an industry where you have lots of incoming trucks loading and unloading on to trains, often at night. Clearly working at night offers some dangers for visibility so removing operators makes the operation more safe. And again, for really dangerous jobs in the steel industry or the energy sector, where physically moving material can risk explosion or toxic gas emissions, then removing people is clearly a good solution.

But for construction it's really about boosting productivity?

Safety is obviously a big factor, but clearly 5G will have a direct positive impact on productivity. Today's remote control technology provides a delay which makes it very difficult to control a machine with any speed or precision, but 5G will be as good as real time. In addition, the picture quality is much better, video footage is in a better resolution and 5G provides a more reliable connection – all of which makes it easier for the operator in the simulator.

What challenges have you experienced so far?

We did find it hard to initially get the hardware. We are so early in the trial that we have trouble finding modems to communicate with the antenna. Telia has been useful in providing the right equipment for us to use. We are so early in trialing this technology that this obviously has its advantages and disadvantages.

And when these issues are resolved, when can we see 5G rolled out to the wider industry?

It depends on different use cases in construction – how do they work, do they meet the demands of the industry, is it feasible for customers? 5G will come first to those that benefit the most, but it will take time to build the network and required infrastructure. For us here in the construction industry, and for static operations like a quarry or mine it really can come quite fast. The timing is good – our customers need connectivity and they want more data. And we're the ones providing the research to see just how possible it is.

More from Construction Technologies

Topcon announces advanced Bentley integration for aerial photogrammetry processing

Topcon Positioning Group announces new cloud-based photogrammetry processing powered by Bentley ContextCapture to its MAGNET Collage Web web-based service for publication, sharing, and analysis of reality capture data. The integration allows MAGNET Collage Web users who share and collaborate with scanning and mesh datasets to now process and add UAV photos directly to the MAGNET Collage 3D environment.   

Trimble Siteworks software adds full GNSS tilt compensation and Android support

Trimble has introduced Trimble Siteworks Software version 1.1, featuring full GNSS tilt compensation functionality in standing, walking and vehicle modes, and support for the Android operating system. Construction surveyors can now capture accurate points without levelling the pole, making surveying in areas such as building corners accurate, fast and easy. In addition, Siteworks version 1.1 now supports the Android operating system, giving contractors the flexibility to choose the field device that best fits their needs and budget. 

Trimble releases update for Earthworks Grade Control Platform

Trimble Earthworks Grade Control Platform version 1.9 comes with support for fully automatic guidance for excavator tiltrotator attachments and Trimble Universal Total Stations for motor graders. Full automatic support for tiltrotators makes the attachment easy to use and learn, even for operators who have never used a tiltrotator. Universal Total Station support allows contractors to achieve millimeter-accurate fine grading with a motor grader. 

Trimble-ready factory option introduced for Liebherr PR736 generation 8 bulldozer

Trimble and Liebherr have introduced a Trimble Ready factory option for new Liebherr PR736 Generation 8 bulldozers. PR736 Generation 8 bulldozers that ship direct from the Liebherr factory are now ready for the installation of the Trimble Earthworks Grade Control Platform, which can significantly reduce the cost and complexity of the installation for the contractor. The announcement was made at bauma 2019.

Topcon introduces new heads-up display for hands-free construction layout

Topcon Positioning Group introduces a new LN-100 hands free, voice activated heads-up display (HUD) solution. This wearable assistant provides visual layout directions via HUD glasses that guide the operator using an LN-100 to efficiently perform layout work at a construction site. The wearable assistant enables customers to use both hands to accurately mark layout points.

free-paper-airplane

Get our newsletter

Learn more

Liebherr aims to revolutionize operation and machine communication with INTUSI control system

At bauma 2019, Liebherr will unveil  INTUSI, its INTeractive USer Interface, to the public for the first time. Liebherr says that this innovative, adaptive and intuitive operating concept will revolutionize the communication between and with construction machines. INTUSI connects Liebherr construction machinery and material handlers to the Internet of things (IoT) and is combining an intelligent operating logic with clever machine intelligence. With INTUSI, Liebherr has created a completely new, modern control environment.

CM Labs to exhibit Instructor Operating Station in Canadian Pavilion at Bauma 2019

CM Labs Simulations, developer of Vortex training simulators, is releasing the Instructor Operating Station (IOS), CM Labs' dedicated solution for directing, monitoring and assessing trainees. Designed to complement CM Labs' Vortex simulators for operator training, the IOS provides rich functionality for engaging training sessions, while its smart monitoring tools enable a 360-degree perspective on trainee progress.

Trimble expands PULSE field management platform to seamlessly connect service, equipment and fleet managers on a single platform

Trimble has announced that it has enhanced the Trimble PULSE field management suite with an advanced, SaaS-based telematics platform that connects, monitors and manages assets to enable intelligent decision-making and timely actions. Trimble PULSE Telematics provides a single platform for service, equipment and fleet managers to collaborate and connect their workflows to allow for improved sharing of information.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Trimble brings next-generation mixed-reality to HoloLens 2

Trimble announced a new wearable hard hat compatible device that enables workers in safety-controlled environments to access holographic information on the worksite—the Trimble XR10 with HoloLens 2. In addition, an expanded set of Trimble software and services will be available to provide field-oriented workflows that leverage constructible 3D models and mixed reality to solve daily work tasks.

Trimble announces lightweight, rugged T7 tablet

Trimble introduced today the Trimble T7 Tablet, a rugged, lightweight and versatile device for construction surveying applications. Using Trimble Siteworks Software for construction surveying, the Trimble T7 provides real-time data to visualize cut/fill levels, calculate material volumes, check grade and communicate work orders to increase productivity and enable better decision making.

Trimble Exchange offers e-commerce platform for pre-owned Trimble gear

Trimble Exchange is an e-commerce platform connecting Trimble's SITECH dealer network directly with customers in the U.S. looking to purchase pre-owned, refurbished and legacy Trimble products. Inventory listed on Trimble Exchange is populated only by participating, authorized Trimble resellers. Customers shopping on Trimble Exchange complete their purchases through their trusted local dealer, allowing them to shop from a nationwide database and buy locally.

Topcon announces upgrade to MAGNET Collage Web complete with new deliverable options

Topcon Positioning Group announces the latest upgrade to MAGNET Collage Web, the web-based service enabling the sharing and collaboration of UAV and scanning data sets. MAGNET Collage Web version 1.3 is designed to allow operators to work with more types of data with greater flexibility, including the ability to import BIM models, as well as CAD and GIS data.   

New Kespry construction innovations further drive project profitability by enhancing drone flight and on-demand data accuracy

Kespry, the drone-based aerial intelligence solution provider, is highlighting its new construction industry-focused innovations at the World of Concrete industry trade show in Las Vegas, January 22-26. The international event is the only large-scale show dedicated to the commercial concrete and masonry construction industries. As part of its global strategic alliance with John Deere, Kespry will be featured at John Deere's World of Concrete booth located at C545.

free-paper-airplane

Get our newsletter

Learn more

Taking technology into the field

Every construction contractor knows how paper can build up in the office and on the jobsite during work on any particular project. When it comes to a building contract, the requirements are pretty much the same no matter how high the bid, and owners need them all met before they sign the cheque.

New version of Trimble Earthworks Grade Control Platform includes support for motor graders and automatic guidance for tiltrotators

Trimble has released Earthworks Grade Control Platform version 1.7 with support for motor graders and automatic guidance for tiltrotator attachments. Trimble Earthworks for Motor Graders is a GNSS-based, 3D grade control solution designed to make fine grading more accurate, faster and easier than ever before. In addition, Trimble Earthworks now gives excavator operators using tiltrotators the advantage of automatic machine control, which can result in increased productivity.

Watch this: Topcon introduces Infrastructure and Technology documentary series

Topcon Positioning Group has announced a new series of documentary videos designed to bring greater awareness to automation and technology in the construction and agriculture industries. Along with thought leadership from Topcon, the documentaries feature interviews with various tangential industry experts and business representatives – including comments from Intel Corporation, SAP and Solar City Corporation, among others – offering their perspectives on how technological advancements have changed infrastructure and what to expect going forward. 

Sage, Procore integrations updated for enhanced operations across construction industry

Updates have been released to the Sage and Procore Integrations announced in June 2018, making them better equipped to serve users across the construction industry. With enhancements to the Sage 300 CRE integration and launch of the Sage 100 integrations, Procore is able to offer something to every construction professional, regardless of your size or trade. Improving upon these two Sage integrations has been another step toward providing tools that work for professionals throughout the industry, streamlining their jobs and simplifying the workflow.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more