Heavy Equipment Guide Logo

This ad will close in 15 seconds

Kenworth adds two new ratings for PACCAR MX-13 engine

W990 76-inch Mid-Roof Sleeper
W990 76-inch Mid-Roof Sleeper TruckPR

Kenworth has added two new ratings for the 12.9-litre PACCAR MX-13 engine available for the Kenworth T680, T880 and W990. The PACCAR MX-13 engine brings efficiency and flexibility together into one, high-performance solution.

The first new rating of 405 hp and 1,650 lb-ft of torque provides constant power for line haul applications, enhances integration with the PACCAR Powertrain, and offers increased fuel efficiency.
 
The second is a multi-torque 455 hp rating with 1,650/1,850 lb-ft of torque that is optimized for fuel-conscious heavy haul fleets and truck operators. This rating provides additional torque in the top two gears while pulling a load up a hill, eliminating the need to downshift.
 
As a result, the PACCAR MX-13 engine now offers ranges of 405 to 510 hp and 1,450 to 1,850 lb-ft of torque.
 
"These new PACCAR MX-13 ratings provide enhanced fuel efficiency and lower operating costs for our customers," said Kurt Swihart, Kenworth marketing director.
 
In addition, Kenworth now offers a variable speed fan clutch as on option for the 10.8-liter PACCAR MX-11 engine for the Kenworth T680 and T880. The clutch maximizes engine power to the drive axle, helps prevent under- and over-cooling in all climates, and provides faster warm-up and more efficient air conditioning. The PACCAR MX-11 engine features superior performance, a powerful and lightweight design, and ranges of 355 to 430 hp and 1,250 to 1,650 lb-ft of torque.
 
"The PACCAR MX engine series has a B10 design life of one million miles in line haul applications. This means 90 percent of PACCAR Engines will log up to one million miles without a major overhaul, almost double the life of a comparable engine," Swihart said. "The PACCAR MX engine series has been well-accepted by fleets and truck operators in the United States and Canada since introduction nine years ago."

TAT Everyday Heroes Kenworth T680 TruckPR
T880S Dump TruckPR
PACCAR MX-11 Engine TruckPR

More from Parts & Components

Continental introduces Generation 3 construction truck tires and digital tire monitoring solutions at Texas event

Heavy Equipment Guide and Recycling Product News attended a demo of Continental's construction and on/off-road tire portfolio at the company's proving grounds in Uvalde, Texas, in September. Demos ranged from a 19.5-inch medium-duty truck tire up to heavy truck tires and earthmoving OTR tires. The company also introduced its digital tire monitoring solutions.

DEUTZ, Sany plan joint venture in Chinese city

Joint venture partners SANY and DEUTZ AG have signed an agreement with representatives of the government of Changsha during the foundation stone laying ceremony at the production site in Changsha. DEUTZ AG and SANY, China's largest construction equipment manufacturer, had already signed the agreement to establish a joint venture in June this year. The aim of the two companies is to build a factory to produce high-performance engines in the province of Hunan. 

Fifty years of retread manufacturing by Bridgestone marked at Bandag plant

Bridgestone Americas, Inc., a subsidiary of Bridgestone Corporation, the world's largest tire and rubber company, announced its Bandag retread manufacturing plant in Oxford, North Carolina celebrated 50 years of production on Sept. 26, 2019. Bandag is Bridgestone's business unit dedicated to the research, development and manufacturing of premium retread tires. The Bandag plant in Oxford began manufacturing tread rubber and retreading materials in 1969 and continues to play a vital role in the local community today by employing nearly 200 people. Bridgestone hosted a lunch banquet and tour of the facility on Sept. 26 to mark the important milestone.

Subscribe to our free newsletter

Get our newsletter

Learn more

NTEA training module focuses on vehicle powertrains

To support employee education and training in the work truck industry, NTEA has developed a Truck Equipment 201 module covering commercial vehicle powertrains. TE201 is intended as a series of online course modules, designed for those with technical knowledge seeking deeper understanding of specific topics outlined in TE101 — the introductory course released by NTEA in 2017. This powertrain module — the second TE201 course — will help expand understanding of the vehicle powertrain by reviewing horsepower and torque, engine function and alternative propulsion, power and torque transfer by the transmission, and driveline and axle.

Bell exclusively selects Allison Transmissions for articulated dump trucks

Allison Transmission Holdings Inc. announced a partnership with Bell Equipment. In addition to utilizing the Allison 4800 ORS in an industry leading 60- ton articulated dump truck (ADT), Allison introduced the 3400ORS transmission for the Bell B30E (ADT). Additionally, the South African manufacturer has recently announced the extension of Allison Transmission as their exclusive transmission supplier for the next five years.

New Cutmaster Black Series plasma cutting consumables last 60% longer

Thermal Dynamics, an ESAB brand, has launched its new Cutmaster Black Series of enhanced performance plasma cutting consumables, which extend operating life by 60 percent compared to standard life electrodes. They are featured on the SL60QD 1Torch, which comes with the Cutmaster 60i handheld air plasma cutting system. Coupled with internal enhancements on the Cutmaster 60i, the new electrode design increases the unit's rated cut and piercing capacity to 3/4 in., a 16.6 percent improvement. The Cutmaster 60i can sever metal up to 1-1/2 in.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Michelin introduces next generation of its skid-steer TWEEL tire at Saskatchwan event

Making its North American debut at Ag in Motion in Saskatchewan, the MICHELIN X TWEEL SSL 2 AT and HST 12N16.5 – the airless tire solution for skid steers – will launch the new version of its award-winning airless radial tire in both an all-terrain (AT) and a hard-surface version (HST). Available Aug. 1 in the United States and Canada, this is Michelin's first embedded 8-bolt hub that is interlocked mechanically to increase durability.

Allison Transmission commits to growth, innovation in core businesses

Indiana Governor Eric J. Holcomb joined Indianapolis Mayor Joe Hogsett, town of Speedway officials and executives from Allison Transmission, a global manufacturer of propulsion solutions for medium- and heavy-duty commercial vehicles, to celebrate the company's planned growth across a variety of initiatives, which will create more than 300 new jobs through 2020. As part of its expansion plans, the company broke ground on its new Innovation Center in Indianapolis.

Diesel trends: performance in smaller packages

Implementation of European Stage V emissions regulations this year has been a driver of much work in the diesel engine sector, as most major manufacturers have taken the opportunity to improve their existing models while ensuring the meet the reduced emissions levels. In the process, some have launched new engines of various sizes or updated existing equipment.

Subscribe to our free newsletter

Get our newsletter

Learn more

DEUTZ presents zero-carbon alternative drive systems for off-highway sector of tomorrow

DEUTZ brought its REVOLUTIONIZING POWER - High-Performance Advanced Drive Systems to the bauma trade fair in Munich in early April. For the first time, it presented a range of innovative drive systems for zero-carbon off-highway applications of tomorrow. The international leading manufacturer of engines for the off-highway sector is now able to offer individual combinations of diesel, gas, hydrogen, hybrid and electrified drives as part of a modular product system. 

Power to crush: Volvo Penta is providing power and performance to McCloskey International

Machine operator Gary Mooney is at the controls of a McCloskey jaw crusher. Against the dusty backdrop of Ballycastle Quarry in Northern Ireland, this  machine is moving in close again to collect more rock, just blasted from the quarry face. Featuring a Volvo Penta D13 engine, it's a combination that matches power and performance under extreme conditions.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more