Doosan Portable Power introduces dual-flow air compressor with 210 cfm high-pressure mode
Doosan Portable Power has introduced the P250/HP210 Tier 4 Final portable air compressor. The "two-in-one" model delivers the pressure and flow typically supplied by two units in a single air compressor. The P250/HP210 is the only air compressor on the market to offer 210 cfm high-pressure mode.
The P250/HP210, which replaces the P250/HP185 in the Doosan air compressor lineup, offers dual compression modes. The P250/HP210 delivers 250 cfm of air at 100 psi in low-pressure mode and 210 cfm of air at 150 psi in high-pressure mode.
"With the P250/HP210, Doosan is responding to market demand for air compressors that can deliver increased airflow," said Jeremy Bailey, Doosan Portable Power air products manager. "It provides the flexibility to perform a variety of applications with one machine. Customers who need an air compressor for sandblasting, construction or pneumatic tool operation will seek out the increased airflow that the P250/HP210 can provide."
For reduced downtime, the P250/HP210 runs eight hours at 100 percent load on low-pressure mode and nine hours at 100 percent load on high-pressure mode. The extended runtime is achieved with a 34.5-gallon fuel tank. Despite the larger fuel tank, the P250/HP210 is the same compact size as its predecessor model, the P250/HP185, and its working weight is 8 percent lighter.
The P250/HP210 cold starts in temperatures as low as -10 degrees Fahrenheit, which is 20 degrees colder than other air compressor brands. Due to its advanced cooling system, its limiting ambient temperature (LAT) is 120 degrees Fahrenheit on low-pressure mode and 118 degrees Fahrenheit on high-pressure mode - making the machine one of the most reliable air compressors in the industry.
To simplify maintenance, the P250/HP210 has new, convenient curbside discharge valves and cooler clean-out ports, with best-in-class cooler access. All its filters are readily accessible and clearly marked, and diagnostic connections are also easier to reach.
The performance of the P250/HP210 is backed by multiple warranties, including a 1-year/2,000-hour bumper-to-bumper warranty; a 2-year/4,000-hour airend warranty; and a 5-year, 10,000-hour Doosan extended warranty contingent on the use of genuine Doosan fluids and filters and service at prescribed intervals.
As one of the latest models in the R2-Series excavator lineup, the Bobcat® E88 delivers durability, performance and quality for more productivity. Technically speaking, it's a compact machine, but it brings big performance with its redesigned engine and optimized lift performance, plus undercarriage and counterweight improvements. All these enhancements make this excavator one of the highest-performing models in its size class. With impressive over-the-side lift capacity, you can dig with greater confidence over the side of the machine. Put it to the test against similar models from other manufacturers. You'll see that the E88 can outwork the competition.