Heavy Equipment Guide Logo

This ad will close in 15 seconds

Portable vehicle scales​ help heavy-haul carriers stay compliant

0152/37980_en_fcb0b_40502_intercomp-heavy-haul-final.jpg

Company info

3839 County Road 116
Medina, MN
US, 55340

Website:
intercompcompany.com

Phone number:
1-800-328-3336

Read more

Heavy-haul carriers transport oversized objects using public roadways. While these loads may weigh hundreds of thousands of pounds, operators must still comply with permitted limits, while also completing their job safely. Intercomp has a variety of options to fill this unique application for a range of applications including construction, oil & gas, waste and recycling, heavy-haul transportation and electrical utility.

Heavy-haul experts move some of the largest items in the world. Carriers must comply with gross vehicle weight (GVW) and axle weight limits to avoid roadway damage and safety hazards. Portable vehicle scales allow operators to identify individual overweight axles due to incorrect placement, providing the opportunity to fix a potential problem.

Intercomp offers heavy-haul carriers several portable scale options to ensure axle and gross weights comply with local ordinances, or stay below the thresholds outlined in a hauling permit. Since its introduction, the LP600 has been the go-to portable scale for heavy-haul operators. The most important benefit of this scale is an easy approach due to standard dual-wide pads and a height less than 1.75 inches.

The LP600-15T is a complete, portable roll-over axle scale system. The system consists of two LP600 pads, bundled with four portable Roll-Up Ramps/Levelers to keep all axles within a group - adjacent axles within 10 feet - on plane. Axle weights can be shown on one of the built-in displays for each pad, or transmitted to a remote indicator via RFX Wireless Weighing. Using either indicator, GVW can be determined by totalizing individual axle weights with the push of a button.

The LS630-WIM (Weigh-In-Motion) is a portable, in-motion weighing system ideal to accommodate high traffic volume at a temporary facility to monitor axle weight or GVW (Gross Vehicle Weight) compliance for usage of public roads. Additionally, the system can be used at multiple locations as two people can deploy or stow the scale pads, ramps/levelers and output CPU in less than 15 minutes. The LS630-WIM System also includes Roll-Up Ramps/Levelers, offers heavy-haul operators the ability weigh multi-axle truck/trailer combinations while the vehicle remains in motion. This provides operators a portable system to measure and record up to 36 individual axle weights without the need to stop, making it the most efficient option for weighing multi-axle vehicles. The included PC with IntercompWIM software, or PT20 WIM, can automatically totalize axle weights to determine GVW, while also providing the ability to save weight records or print weigh tickets that include individual axle weights.

See a video of the LS630-WIM model in action below.


More from Trucking

Edmonton technician becomes first woman to earn Kenworth's highest service certification

The personal interests that develop at an early age are often the ones that will last a lifetime. From fixing equipment on the farm with her father, to becoming the first woman in the Kenworth dealer network in Canada and the United States to achieve the prestigious Kenworth Certified Master Technician status, Jennifer Lesnik always knew she had the skillset to work on heavy equipment as a profession.

Calculating the true costs of heavy-haul trailer ownership

With a cost on par with the average home mortgage, heavy-haul trailers represent a significant investment for businesses. The right trailer can provide fast ROI, greater productivity and increased profits. The wrong decision, however, can leave trucking companies with the financial burden of a unit that will cost far more in the long run than the business is prepared to take on.  

FUSO Class 5 FE 180 GAS cabover production kicks off

Mitsubishi Fuso Truck of America, Inc. (MFTA) announced that production of the industry's first Class 5 cabover gasoline-powered work truck has begun at the Freightliner Custom Chassis Corporation (FCCC) plant in Gaffney, South Carolina. FCCC is a sister company within Daimler Trucks. This truck adds to the lineup of FUSO's already popular Class 4 gasoline models introduced in 2018.

Subscribe to our free newsletter

Get our newsletter

Learn more

Rapidly evolving trucking industry diversifies with top female talent

The trucking industry is the backbone of our economy, relied upon to safely and efficiently transport goods that support daily needs. In fact, the trucking industry is the single largest mover of freight and is expected to carry nearly 22 billion tons in 2029, a 35 percent increase in freight volume from today. Women are now making up more and more of the industry demographic, challenging stereotypes and making notable contributions across every link of the value chain.

Daimler Trucks North American alternative energy efforts earn 2019 Clean Air Technology nod

Daimler Trucks North America LLC has been recognized with the 2019 Clean Air Technology award from the South Coast Air Quality Management District (South Coast AQMD). DTNA was recognized for its Innovation Fleet from Freightliner, a 30-vehicle fleet of battery electric medium- and heavy-duty trucks currently testing integration of battery electric commercial vehicles into large-scale transportation operations.

Autocar releases new concrete mixer and concrete pump truck models

Autocar Trucks has announced the launch of two truck models purpose-built to serve the concrete and construction industry: the Autocar DC-64M, for concrete mixers, and the DC-64P for concrete pump applications. The Autocar DC is a completely new conventional truck engineered from the ground-up for severe-duty vocational applications. Autocar's guiding mission is to build trucks to be "Always Up" - that is, to stay in service despite the challenges they face, year-after-year. The Autocar DC-64M and DC-64P bring several notable innovations that make them uniquely suited for their respective vocations.

NTEA training module focuses on vehicle powertrains

To support employee education and training in the work truck industry, NTEA has developed a Truck Equipment 201 module covering commercial vehicle powertrains. TE201 is intended as a series of online course modules, designed for those with technical knowledge seeking deeper understanding of specific topics outlined in TE101 — the introductory course released by NTEA in 2017. This powertrain module — the second TE201 course — will help expand understanding of the vehicle powertrain by reviewing horsepower and torque, engine function and alternative propulsion, power and torque transfer by the transmission, and driveline and axle.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Automated trucks hit public roads as Daimler Trucks starts testing

Daimler Trucks and Torc Robotics are actively developing and testing automated trucks with SAE Level 4 intent technology on public roads. The initial routes are on highways in southwest Virginia, where Torc Robotics is headquartered. All automated runs require both an engineer overseeing the system and a highly trained safety driver certified by Daimler Trucks and Torc Robotics. All safety drivers hold a commercial driver's license and are specially trained in vehicle dynamics and automated systems.

3D printing technology finds place improving quality at Volvo Trucks factory

Volvo Trucks North America is utilizing 3D printing technology to produce tools and fixtures used in the manufacturing process at its New River Valley (NRV) plant in Dublin, Virginia, where all trucks for the North American market are built. The implementation of 3D-printed manufacturing tools enables quicker production and continuous quality improvements.

Dynamic maintenance service further improves Volvo Trucks uptime

Volvo Trucks introduces dynamic maintenance, a connected vehicle maintenance service which seeks to improve fleet operations efficiency through proactive and flexible vehicle-specific maintenance planning. The service is designed in partnership with Noregon Systems, an IoT (Internet of Things) company specializing in connected vehicle solutions.

Subscribe to our free newsletter

Get our newsletter

Learn more

Volvo Trucks introduces enhanced turbo compound engine in VNL models

Volvo Trucks North America is introducing the next generation of its Turbo Compound technology, providing up to an additional 3 percent improvement in fuel efficiency over the current 13-litre Turbo Compound engine, the D13TC. This new engine delivers up to 11 percent fuel savings overall compared to model-year 2015 trucks. Other improvements include enhanced efficiency over a wider range of applications, more engine ratings and a new EE Extra Efficiency drive mode. The new D13TC will be available for order in the fourth quarter of 2019 and go into production at the end of the first quarter of 2020.

Philippi-Hagenbuch invents new positive seal tailgate for truck bodies & containers

Philippi-Hagenbuch Inc. has invented a new version of their Autogate Tailgate specifically for off-highway trucks and roll-off containers that require a 100% positive seal. This new design can be paired with PHIL's proprietary fluidic seal material to create a water-tight seal that contains liquid materials within an off-highway truck body or roll-off container when environmental regulations or local laws make even slight spillage undesirable.  

PTO output boosted on diesel-powered 2020 Ford Super Duty chassis cab

New on the 2020 Super Duty Chassis Cab, Ford is proud to offer Power Takeoff (PTO) as standard with its 6.7-litre Power Stroke turbo diesel engine for auxiliary power needs on commercial vehicles. Combined, the 6.7-litre Power Stroke and all-new TorqShift 10-speed heavy duty automatic transmission with the power takeoff provision delivers best-in-class stationary torque of up to 300 lb.-ft. for commercial vehicle bodies that require direct-to-component or hydraulic body motor power. That's 50 lb.-ft. more than the closest competitor.

Service trucks take repairs on the road

Downtime is a curse word among contractors, but the fact is that it's hard to avoid it sometimes. When a machine or truck suffers a breakdown on the job, the need to haul that asset back to the shop just means that downtime is extended.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more