Tags
Earthmoving

Next Generation Cat excavators deliver more choices for increased efficiency and lower operating costs in 36-ton size class

The new Cat 336 has the industry's highest level of standard factory-equipped technology to boost productivity.
The new Cat 336 has the industry's highest level of standard factory-equipped technology to boost productivity.

Next Generation 36-ton-size-class excavators from Caterpillar – the 336 and 336 GC – increase operating efficiency, lower fuel and maintenance costs, and improve operator comfort compared to previous models. The new excavators offer unique combinations of features designed to match contractors' productivity and cost targets.

Delivering high-production performance, the new Cat 336 features standard integrated Cat Connect Technology and the most power and lift capacity of the two models. The result is maximum productivity at the lowest cost.

The new Cat 336 GC combines the right balance of productivity features with reduced fuel consumption and maintenance costs. The result is high reliability and low-cost-per-hour performance.

Technology boosts efficiency by up to 45 percent 

The new Cat 336 has the industry's highest level of standard factory-equipped technology to boost productivity. Integrated Cat Connect Technology increases operating efficiency by up to 45 percent over traditional grading operations.

The standard Cat Grade with 2D system provides guidance for depth, slope, and horizontal distance to grade through the standard touchscreen monitor, making operators more accurate. The system is readily upgradable to Cat Grade with Advanced 2D or Cat Grade with 3D.

Standard Grade Assist automates boom, stick, and bucket movements so operators can effortlessly stay on grade with single-lever digging.

Cat Payload delivers precise load targets and increased loading efficiency with on-the-go weighing and real-time payload estimates to prevent truck over/underloading.

The E-fence feature prevents the excavator from moving outside operator-defined set points – particularly useful when working beneath structures or near traffic.

Cat LINK hardware and software connect jobsites to the office and provide customers with machine-critical operating information.

Fuel savings reaching up to 15 percent

By design, Cat Next Generation excavators consume less fuel than the models they are replacing – up to 15 percent less fuel for the 336.

New Smart mode operation automatically matches engine and hydraulic power to digging conditions, optimizing both fuel consumption and performance. Engine speed is automatically lowered when there is no hydraulic demand to further reduce fuel usage.

The cooling system features a new fan that runs on demand to keep the excavator working at the correct operating temperature for maximum efficiency.

With a new electrohydraulic system built for responsiveness and efficiency, the Cat 336 and 336 GC feature a new main control valve that eliminates the need for pilot lines, reduces pressure losses, and lowers fuel consumption. Fewer hydraulic lines on the excavators result in less oil required, lowering long-term operating costs.

Maintenance costs reduced as much as 15 percent

Offering extended and more synchronized maintenance intervals, the new Cat excavators do more work at a lower cost and reduce maintenance costs by up to 15 percent over the previous series.

The new Cat air filter with integrated pre-cleaner and primary and secondary filters has double the dust holding capacity of the previous design.

The new Cat hydraulic return filter has a 3,000 hour service life – a 50 percent increase over previous filter.

The fuel system filters are synchronized for service at 1,000 hours – a 100 percent increase over the previous filters. 

The fuel system water and sediment drains and hydraulic system oil level are positioned close together at ground level, making routine daily maintenance faster, easier and safer.

New cab designed to enhance operator performance

With a choice of Comfort, Deluxe, or Premium cab packages, all Next Generation Cat excavator cabs come equipped with standard features like keyless push-button start, touchscreen monitor with jog dial keys for control, and sound-suppressed rollover protective structures (ROPS) to offer the next level of operator comfort and safety.

A tilt-up console for the Deluxe and Premium cab designs affords easy cab entry and exit.

New advanced viscous mounts reduce cab vibration by up to 50 percent over previous models.

A Bluetooth integrated radio with USB ports for connecting and charging phones bring creature comforts from the home to the operator's office.

Automatic climate control maintains internal cab temperature settings, regardless of external ambient temperatures.

Programmable joystick buttons for response and pattern allow the operator to "dial in" productivity settings.

Large front, rear and side windows enhance visibility; optional 360-degree visibility (336 only) combines images from multiple machine-mounted cameras to enhance the operator's sight lines in all directions.

Company Info

  • Caterpillar Inc.

    100 North East Adams Street
    Peoria , IL
    US , 61629

    For more than 90 years, Caterpillar Inc. has been making sustainable progress possible and driving positive change on every continent. Customers turn to Caterpillar to help them develop infrastructure, energy and natural resource assets. With 2016 sales and revenues of $38.537 billion, Caterpillar is the world’s leading manufacturer of construction and mining equipment, diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. The company principally operates through its three product segments - Construction Industries, Resource Industries and Energy & Transportation - and also provides financing and related services through its Financial Products segment

    Read more

Related Products

Latest News

Tags
Light Equipment

Generac's new extended run fuel system allows for longer operating hours

The extended run fuel system includes a fuel pump switch, external diesel supply port, external DEF supply port and a DEF power receptacle.

Generac Mobile users can extend their Tier 4 Final generator run time with a new extended run fuel system. The system makes it easy to connect external fuel and diesel exhaust fluid (DEF) tanks to the generator for longer run times. The system is optional on all Generac Mobile Tier 4 Final diesel generators starting at 75 kVA and up.

Read More

Loadscan launch new conveyor belt scanner at AGG1/WOA

The LVS and CVS systems both utilise laser scanning technology, combined with proprietary software, to measure the exact volume of the material (either loaded in a truck/ trailer bin or flowing on a conveyor belt).

Loadscan will show their recently launched conveyor volume scanner (CVS) at the NSSGA's AGG1 expo in Indianapolis. This year Loadscan will be showcasing its CVS alongside the well-known load volume scanner (LVS) on 12-14 February 2019 at booth 39063.

Read More

Tags
Industry News

Hyundai Construction adds Butler Equipment to North American distribution network

Butler Equipment currently services the compact construction and landscape market in central Connecticut and Hyundai will allow them to better service their customer base along with new customers' needs for larger equipment.

Hyundai Construction Equipment Americas has expanded its North American authorized dealer network with the addition of Butler Equipment LLC. Butler will be offering Hyundai Construction Equipment at their West Hartford, Connecticut, location.

Read More

Tags
Telematics

Skyjack's ELEVATE off-highway telematics solution takes home LLEAP Award

This is the 13th year for these awards, and their focus is to shed light on noteworthy innovations that propel the industry forward.

Skyjack took home a Leadership in Lifting Equipment and Aerial Platforms (LLEAP) Award last month. The OEM's off-highway telematics solution, ELEVATE, won in the category of OEM Features or Essential Components. The mobile first solution was launched in early 2018 and Skyjack says that it has since garnered attention from rental companies and associations worldwide.

Read More

Tags
Industry News
Cranes & Lifts

Link-Belt recognizes top five North American crane distributors

“This crane has the small footprint and long boom needed for this facility,” said North Anna Facilities Support Superintendent, Kenneth Boyd.

Mike Ogle, Link-Belt's manager of North American Sales, has announced the company's top five distributors for 2018. These distributors were selected on the basis of overall performance in the marketing and sales of Link-Belt cranes. Their ability to sell cranes is not only a reflection of a superior product but also their outstanding customer service, long-term financial stability and solid reputation in the industry.

Read More

Tags
Industry News

Volvo Group Venture Capital invests in wireless electric charging

Volvo Group Venture Capital is constantly on the look-out for new investments with innovative and entrepreneurial companies supporting the Volvo Group business and its transformation - especially in the areas of electromobility, autonomous vehicles and connectivity. – Volvo Group

Volvo Group Venture Capital AB, a subsidiary of the Volvo Group, announced an investment in Momentum Dynamics Inc - a leading company in high power wireless charging of electric vehicles.

Read More

Tags
Earthmoving

Volvo CE to launch line of electric compact equipment in 2020

In an industry-first move, Volvo Construction Equipment has announced that in 2020 it will start the launch of an electric range of Volvo branded compact wheel loaders and compact excavators.

In a pioneering commitment to future technology, Volvo CE has announced that by mid-2020 it will begin to launch a range of electric compact excavators (EC15 to EC27) and wheel loaders (L20 to L28), stopping new diesel-engine-based development of these models.

Read More

Tags
Industry News
Shows & Events
Trucking

New work trucks and equipment rolling out at The Work Truck Show 2019

Show attendees will have the opportunity to check out products from 26 first-time exhibitors in a special New Exhibitor Pavilion that opens an hour before the exhibit hall on Wednesday, March 6 and Thursday, March 7. It’s located across from the Hall I exhibit hall entrance.

More than 100 companies have already announced plans to introduce new work trucks and equipment at Work Truck Week 2019.

Read More

Tags
Industry News

Superior Industries seeking distributor partners at bauma 2019

“Outside of the Americas, we’ve built successful distributor relationships in Australia, New Zealand, Russia and other regions,” says John Garrison, the manufacturer’s vice president of sales.

Superior Industries Inc., an American-based manufacturer and global supplier of bulk material processing and handling systems, is seeking new relationships with construction equipment dealers and distributors at bauma 2019. Before the event, distribution representatives looking to meet with Superior at bauma are asked to complete an online form at www.superior-ind.com/bauma-2019.

Read More

Tags
Trucking

Powerful performance: an in-depth report on vocational trucks

International HX

Versatile, rugged and powerful, vocational trucks are a key piece of equipment for roadbuilding, excavation, municipal work, concrete delivery, heavy hauling, crane work and other applications. These trucks have become more capable and powerful over time, and every manufacturer offers a variety of approaches to fitting them out that match up with virtually any customer requirement. Recent trends in vocational trucks have focused on getting more power to the ground with innovative transmissions, a drive to improve the driver experience to ensure companies can keep talented drivers longer, and assurances for body builders that upfitting can be done faster and easier.

Read More

Tags
Shows & Events

Manitou North America to showcase new compact equipment at World of Concrete

Shown for the first time at World of Concrete, the company says that the Gehl RT105 track loader is a standout as the most compact on the market yet still delivers an impressive rated operating capacity of 1,050 pounds.

Manitou North America is introducing new products across its Manitou, Gehl and Mustang by Manitou brands at World of Concrete. An interactive outdoor booth in the Silver Lot (#O31054) features opportunities to meet the new management team and learn about the latest equipment and service solutions from Manitou, Gehl and Mustang by Manitou.

Read More

Tags
Industry News
Light Equipment

Vanguard exhibits new 200 and 400 single-cylinder engines at World of Concrete 2019

Vanguard is also showcasing its propane conversion kits, which allow customers to take advantage of the benefits of propane with their current Vanguard-powered commercial equipment.

Vanguard will display the new Vanguard 200 and 400 single-cylinder engines, the first two models in an all-new single-cylinder horizontal shaft commercial engine line, at World of Concrete in booth O31418. The new engine line was developed around key areas of performance critical to improving overall productivity — including starting, maintenance intervals, service and support, and total cost of ownership.

Read More

Tags
Industry News

Dana acquires SME Group, enhances electromobility capabilities and global reach

Dana's existing portfolio of Spicer® Electrified™ with TM4® motors and inverters combined with SME's low-voltage motors will expand the company's capabilities to applications ranging up to 250kW.

Dana Incorporated has completed the acquisition of the SME Group, headquartered in Arzignano, Italy. The global SME Group designs, engineers, and manufactures low-voltage AC induction and synchronous reluctance motors, inverters, and controls for a wide range of off-highway electric vehicle applications, including material handling, agriculture, construction, and automated-guided vehicles.

Read More

Tags
Maintenance & Management

FLO Components exhibiting automatic greasing systems for compact equipment at National Heavy Equipment Show

“We introduced the SM Luber in the Fall of 2018, but NHES 2019 is the first big opportunity to showcase it to the industry”, says Lopez.

FLO Components Ltd. will be exhibiting its new SM (Small Machine) Luber at the National Heavy Equipment Show 2019. This line of automatic greasing systems is designed specifically for compact machines where space is at a premium.

Read More

Tags
Earthmoving

Volvo to show new compact excavator at World of Concrete

Volvo Construction Equipment will be introducing an entirely new machine to the Volvo compact excavator lineup at World of Concrete 2019. The new ECR18E is an ultra-short-swing-radius compact excavator that features a rear overhang of only 0.5 inches when the tracks are fully extended. Its low height (79 inches) and variable undercarriage (from 39 to 53 inches) allows for working in incredibly tight spaces when needed and provides excellent stability once in position. Attendees who stop by Volvo's World of Concrete Booth C7013 can also see the L90H wheel loader with long boom and the L20H compact wheel loader.

Read More

Tags
Industry News
Trucking

Mack donates Granite model to Concrete Industry Management Auction

Mack Trucks donated a 2019 Mack® Granite® model to the Concrete Industry Management (CIM) Auction, which will be Wednesday, Jan. 23 during World of Concrete 2019. All proceeds from the auction will benefit the CIM program’s mission to develop the next generation of leaders within the concrete industry.

Mack Trucks is continuing its support of the Concrete Industry Management (CIM) program with the donation of a 2019 Mack Granite model to the CIM Auction. Proceeds from the auction, to take place Wednesday, Jan. 23 during World of Concrete 2019, will benefit the CIM program's mission to develop the next generation of leaders within the concrete industry.

Read More

Tags
Trucking

Freightliner Trucks to feature new vocational option at World of Concrete

In addition, visitors to the Freightliner booth will gain access to a variety of bodied-up trucks on display, including 114SD concrete pumpers, cement mixers, volumetric cement mixers and more. The Detroit DD8 and DD13 engines will also be on display at the booth.

Freightliner Trucks will showcase an innovative array of vocational solutions at World of Concrete 2019 in Las Vegas from January 22-25 at booth #C5359. An all-new option will be on display for the first time at World of Concrete: The Freightliner 114SD concrete mixer spec'd with the new Cummins X12 engine.

Read More

Tags
Trucking

Western Star to showcase new truck enhancements, host ninth annual “Get Tough Challenge” at World of Concrete 2019

Visit booth #C5675 inside the conference center or go to the Bronze Lot outside to experience the Western Star difference.

Western Star will display its most rugged trucks and vocational product options at World of Concrete 2019 (Jan. 22-25, 2019, Las Vegas). Show attendees can both see the latest updates to Western Star's most popular truck model, the 4700, at booth #C5675, or visit the Bronze Lot.

Read More