MAJOR, a manufacturer of high-performance screening media, introduces the Flex-Mat Sensor, a valuable and easy to operate vibration data measurement tool users can utilize to review results and fine tune their screen machine without shutting down the equipment. The app-controlled vibration analysis sensor enables readings of screen box vibrations within seconds and generates a report that can be sent or reviewed. The simplicity of the system's design ensures valuable and actionable data without the requirement for a plant shutdown to calibrate the sensor.
Cat 990K aggregate handler boosts wheel loader production in rehandling applications
Caterpillar introduces the 990K Aggregate Handler, designed to handle greater payloads in aggregates yard applications. With as much as a 25 percent payload increase, as compared to the standard 990K Wheel Loader, the new Aggregate Handler enables customers to load trucks and railcars faster and to move more material in load-and-carry and stockpile handling tasks.
The Cat 990K Aggregate Handler has a payload of 22 tons (20 tonnes) and a full turn static tipping load of 96,426 lb (43 738 kg). Additional counterweight maintains machine stability, and robust 990K structures ensure durability in the Aggregate Handler configuration. The loader makes best use of general purpose and coal buckets for increased volume.
The 990K Aggregate Handler is available in standard lift configuration with 13.5-ft (4108-mm) dump clearance and in high lift configuration with 15-ft (4569-mm) dump clearance. Increased capacity and high dump clearance enable customers to load railcars and large trucks with a better pass match for faster material handling at lower cost per ton.
The 990K Aggregate Handler complements the smaller 986K and 988K Aggregate Handlers in the Cat large wheel loader line. The Aggregate Handler, however, is not designed for use in quarry face or other shot rock applications.
Building on the 990K
The new 990K Aggregate Handler is built on the proven features of the 990K Wheel Loader. The 990K powertrain provides powerful operation with superior fuel efficiency. The Cat C27 engine powers the loader and delivers net power of 699 hp (521 kW). Lower engine speed helps drive economical fuel use. Additional fuel savings accrue with the ECO Mode (on-demand throttle), engine-idle shutdown system, and engine-idle kickdown/auto-resume system.
The Cat exclusive, field-proven impeller clutch torque converter uses a lock-up clutch, providing direct drive to boost fuel economy, trim cycle times, and reduce heat—especially in load-and-carry applications. The system allows operators to balance rimpull and hydraulic power for optimum loading efficiency. Positive Flow Control implement hydraulics use a variable displacement, electronically controlled pump to precisely apportion oil flow based on operator control inputs.
A number of drivetrain options are available. The integrated axle cooling and ride control options are particularly beneficial in load-and-carry work.
The operator station features the Cat Vital Information Management System, VIMS 3G, which provides customizable operator profiles, a cycle timer and an integral Payload Control System, which provides on-the-go payload weighing. The graphical information display is easy to use and keeps key information in front of the operator. The Cat Comfort III seat provides integrated seat-mounted controls for smooth and comfortable operation. Transmission controls, integral with the STIC steering lever, allow convenient travel control.
The 990K is equipped with the Cat Vision rearview camera system and in-cab display to show the operator the area behind the loader. The Cat Detect object detection system, available as an option, builds on the camera system with radars and in-cab software that provide notification to the operator when an object is detected within the radar coverage area. The systems are designed to enhance operator awareness, especially in congested loading areas.
More from Aggregates & Quarries
Superior Industries Inc. has announced that a limited lifetime warranty now comes standard with new Patriot Cone Crushers. One-of-a-kind in dry bulk crushing, the no cost extended warranty covers the cone's major components including the adjustment ring, bowl, eccentric, head, mainframe and main shaft.
EvoQuip and Emerald Equipment will host an open event in New Jersey on July 25-26, 2019. This exclusive event will showcase live working demos of the company's Bison 280, Cobra 230 and 230R as well as the entire Colt range.
Continuous expansion, high quality standards as well as short delivery deadlines made such a step necessary for the manufacturer of mobile crushing and screening machinery, Kormann Rockster Recycler GmbH from Ennsdorf. The acquisition of a 10,000 m² property in Neumarkt im Mühlkreis (Upper Austria) promises to provide a strong and needed force in a continuous growth and market demand.
As the general manager of aggregate equipment manufacturer McLanahan, Mark Krause has seen a lot of change in the industry as a whole. Advances in technology are making significant inroads into aggregates, and that, combined with desire for more mobility from customers and a drive to draw new, younger professionals to the industry is what Krause sees shaping the market in coming years.
For Wayne Ylitalo, relationships with suppliers and customers is everything. That is how he built his business. Following that core principle has led him to a successful lifelong career in the aggregate industry around Toronto and across Ontario. It's also why he's been using VEI loader scales from RMT Equipment for 20 years. "When you buy something good, you have to tell other people how good it is," he says.
Metso has signed an agreement to acquire McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, to expand Metso's offering in the aggregates industry globally and to strengthen the customer reach especially to general contractor customers.
Haver & Boecker Niagara offers rugged primary crushing plants in a wide variety of configurations for pre-crushing, secondary and tertiary crushing in the mining and aggregates industries. From design to installation, the manufacturer uses its extensive industry experience and knowledge to provide turnkey systems engineered and built to individual specifications. Haver & Boecker Niagara will work with any crusher and peripheral component manufacturers to ensure customers receive the best plant matched to their requirements.
Metso has reached the significant milestone of 10,000 Nordberg® HP cone crushers sold globally. The most popular modern cone crusher in the world, according to Metso, the HP Series celebrates its 30th anniversary this year. The 10,000th HP cone crusher unit was handed over to the French aggregates and asphalt producer and urban infrastructure development company Eurovia in a ceremony held this week at Metso's Mâcon facility in France.
Cedarapids, a Terex Minerals Processing Systems (MPS) brand, offers a new range of cone crushers. The new TG Series will be a Bronze Bushing Spider Bearing Cone. This new series of cones will complement the current Cedarapids MVPX Series (Screw Type Cone) and the Cedarapids TC Series (Floating Bowl Cone). Terex MPS will now offer a solution for every cone crushing application requirement while meeting the application needs of customers with the best possible product quality and productivity.
Lindsey Aggregates, based in New York state, is to open its doors this June to showcase its new multi-million-dollar integrated sand washing system, designed and installed by full-service EPC company CDE.
Impact crushers have broad appeal across various sectors and for good reasons. Our panel of experts provides insight as to why this is, plus information on the dynamic market for impact crushers in Canada, their applications and advantages, customization and options, as well as what to consider when buying an impact crusher.
Following Terex Corporation's release of its first quarter 2019 results, Terex Materials Processing (MP) is pleased to share these, along with its segment-specific results.
Modern crushing plants have become more and more complex as their requirements rise. At the same time, the technology must be safe and as simple as possible to operate – and without lengthy instruction and familiarization periods. This is the challenge which faced Kleemann. At bauma 2019 Kleemann showcased innovative solutions for the safe and simple operation of crushing and screening plants.
Haver & Boecker has established its global brand Haver & Boecker Niagara to combine the engineering expertise and product portfolios of its three mineral processing locations in Brazil, Canada and Germany. In the past, the three locations acted individually for their respective regions and territories. Customers around the world will benefit from shared innovative technology, more in-depth consultations, greater parts availability and better delivery times.
At Bauma 2019, Rockster not only presented its diverse range of products, but also immersed the visitors in new fields of interest. Wolfgang Kormann, CEO of Rockster Recycler from Austria, is convinced that this trade fair really deserves to be called "The World's Leading Trade Fair for Construction Machinery".
Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.
Washing equipment specialist McCloskey Washing Systems (MWS), along with their UK dealer MaxInnovate Ltd, held its first multi-spread demonstration event, at Monk Plant Hire (MPH) in Hockering, Norwich, UK on Wednesday 20th and Thursday 21st March, highlighting the power of the washing equipment working together. The demonstrations were an integral part of events tailored to familiarize both new and established dealers and customers with the versatility and productivity of MWS latest products.
Aggregates equipment OEM Metso began a partnership with Volvo Penta in 2016 following increased customer demand for fuel-efficient engines. Now, it is set to install Volvo Penta's Stage V solutions as an option on its mobile crushing machines.
Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications.
"Hauling is one of the most cost-intensive components of a typical mining or quarrying operation. In addition to fuel and labor, there's plenty of maintenance involved too. To ensure cost efficiency, a haul truck should carry as much payload as possible on every round. At Metso, we set out to tackle this challenge and designed a truck body that requires minimal maintenance while maximizing payload. The result is a lower operating cost per hauled ton," says Lars Skoog, Vice President, Mining Wear Lining & Screening, Metso.
Keestrack prides itself in consistently developing its worldwide manufacturing capacities. The company, which at bauma celebrated its 10,000th production machine since the legendary "4518" was introduced in 1996, is also marking the completion of its new 8740-square-metre assembly complex, the second extension phase of its main factory in Šternberk, Czech Republic. More milestones and new extension projects will be set and started in 2019, including the opening of Keestrack's Indian assembly in Neemrana and new production capacities in Ponzano Veneto, Italy.
Powerscreen showcased its revolutionary OMNI by Terex technology to help improve jobsite safety and efficiency in operating Powerscreen equipment at the recent bauma 2019.
Metso is introducing the latest addition to the versatile MX Multi-Action cone crusher series at Bauma 2019. The MX3 enables improved crusher productivity and lower operating costs with a design optimized especially for mid-sized quarrying.
The second generation J-1160 jaw crusher has been designed with the customer and operator in mind. In comparison to its predecessor the plant has a number of improvements such as increased under jaw clearance and all round preventative maintenance and serviceability access.
CDE has launched the Combo™ in a move set to revolutionize the wet processing industry.
Terex Minerals Processing Systems (MPS) has launched a new series of Simplicity Standard Incline (SI) screens designed for heavy duty, medium and fine screening applications and come with many features which make the screens more versatile and highly reliable in the market.
Aggregates operators are always looking for ways to improve their efficiency and make more informed decisions in their planning processes. Many are adopting emerging technology as an added way to develop their operations, and the advent of drones is playing a large part.
Volvo Construction Equipment's Electric Site project aims to test the world's first "emission-free" quarry by electrifying each transport stage, from excavation to primary crushing, and transport to secondary crushing. It uses both electric and autonomous Volvo CE prototype machines, plus new machine and fleet control systems and an entirely integrated real-time site management system. Together, these form a complete Electric Site solution. Volvo CE and its customer Skanska tested the viability of the Electric Site research project for 10 weeks at a Skanska's Vikan Kross quarry near Gothenburg, Sweden. Heavy Equipment Guide staff were on site to see the operation and learn about the results.
At this year's bauma, Kleemann presents a comprehensive cross-section of its innovative product portfolio with a total of seven mobile crushing and screening plants. High-performance machines and environmentally-compatible solutions for natural stone and recycling applications will be presented.
It is no surprise that there are plenty of variables that come into play when it comes to optimizing an aggregates operation. One area in particular where telematics and other technologies can improve efficiency and profitability is tracking and managing loadout activities.
Keestrack offers today the most versatile range of hybrid and plug-in solutions in mobile processing technology for quarrying and recycling applications. This applies to the complete product range, from screening plants and stockpile conveyors to mobile track-mounted crushing solutions of all relevant technologies and for all production capacities.
Terex Washing Systems (TWS) will present live washing demos of their game-changing AggWash 60 during bauma 2019. This showcase, in conjunction with their German distributors Kolsch and Christophel, is being hosted at Mittermeier (Kolsch customer site), located next to Hall FN 1024 / 1, April 8-14, 2019.
At the start of 2019, Kleemann was awarded two international design prizes: the iF DESIGN AWARD and the GOOD DESIGN Award for the jaw crusher MOBICAT MC 120 Z PRO and the screening plants of the EVO line. Innovative details for safe operation and simple handling impressed the jury members.
Wet processing equipment manufacturer CDE is launching an innovative new range of technology solutions to enable customers to increase the efficiency of their plant, automate processes, and lower their operating costs.