Powerscreen has announced that it is bringing back the Phoenix range of trommel screens -- one of the company's original equipment lines.
Morbark hosts 12th Demo Days, debuting new 23X Chiparvestor and showing latest grinders and chippers
Morbark's Demo Days event always brings a great deal of excitement to the area and its guests, and this year was no exception! From September 26-28, Morbark welcomed more than 250 guests within the forestry, biomass, recycling, sawmill and tree care industries from 14 countries for its 12th Demo Days event!
Morbark has a world-class dealer network, and the company's Demo Days give their customers, as well as the other attendees, the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the manufacturing processes utilized. Events included factory tours, networking opportunities, vendor booths, and a chance to see the equipment up close.
But perhaps the most exciting aspect of this year's event was the introduction of the new 23X Chiparvestor!
"In designing the 23X Chiparvestor whole tree disc chipper, Morbark followed the same thought process and ideals as we did in creating the other X-series of next-generation Morbark equipment," said Michael Stanton, Morbark Director of Industrial Sales. "We took our previous proven design technology and focused on minimizing downtime, increasing production and making improvements that will help contribute to customer success."
Morbark has been producing mobile whole tree disc chippers since the 1970s, and like the previous Model 23 Chiparvestors, the 23X uses a 75″ (190.5 cm) diameter x 5″ (12.7 cm) thick chipper disc to chip large volumes of wood, while the built-in dirt separator with deflector keeps the end product clean.
Morbark Demo Days 2018
Demo Days events kicked off on Wednesday night with a Welcome Reception at Maple Creek Golf Course. Thursday focused on education, with a panel discussion about growing your business, featuring Jerry Sapp of Sapp's Land and Excavating, and Bill Gaston of Wood Resource Recovery. Attendees then had the opportunity to learn about Tier 4 Final Engines, Financing and Extended Service Contracts and Warranties, as well as take a tour through the Morbark factory and see firsthand the cutting-edge technologies, materials and processes used to manufacture the company's industrial and tree care equipment lines.
Since this is the first Morbark Demo Days after the company acquired Rayco in November 2017, participants were able to see a demonstration of Rayco forestry mulchers and aerial trimmer, and even try their hand at using the equipment! The event culminated today with demonstrations of equipment for the forestry, biomass, recycling and tree care markets.
The equipment models demonstrated included the new 23X Chiparvestor, as well as chippers, horizontal and tub grinders, and Rayco forestry trimmers, chippers and mulchers.
More from C&D Recycling
Continental Biomass Industries (CBI) premiered the 6400CT Horizontal Grinder and Chipper at the 2019 Factory Forum in Newton, New Hampshire. The 6400CT processed steel contaminated railroad ties along with a mix of construction and demolition debris to headline the range of environmental equipment at the show.
Metso is expanding its mobile crushing and screening solutions offering for the aggregates industry with an extensive new product portfolio. The new Metso Nordtrack range introduces 19 products designed to meet the requirements of general contractors in particular. The first deliveries are expected to take place during the first quarter of 2020.
Tigercat Industries Inc. based in Ontario, Canada has completed the purchase of Ragnar Original Innovations (ROI) located in New Hampshire, USA. The company, founded by Anders Ragnarsson, currently manufactures material processing machinery used in the construction, forestry and recycling industries.
The Recycling Product News team is in Toronto this week for the Waste & Recycling Expo Canada (aka CWRE) annual trade show and convention. We interviewed representatives from some of the innovative companies exhibiting on the show floor.
Metso's acquisition of McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, has been successfully completed. With this acquisition, Metso expands its offering in the aggregates industry globally and strengthens its customer reach especially to the general contractor segment. The acquisition was completed on October 1, 2019.
When it comes to large scale demolition, Mantovanibenne's combination crushers are ideal tools for tackling reinforced concrete and metal structures. These Italian-made attachments incorporate characteristics of crushers and shears to deliver performance even in the toughest of situations. These crushers' performance comes from the powerful cylinders and the twin pin system that contribute to the breaking and cutting force. The jaws incorporate sharp shear shaped blades that guide the cutting power to be executed in a clean controllable manner for the operator.
Thompson Recycle Company slashes fuel and maintenance costs, minimizes downtime with Volvo Penta-powered generators
Thompson Recycle Company reprocesses mountains of used asphalt rubble every year with its three mobile crushing plants in Michigan. The mobile plants use generators as their prime power source at road construction sites. Since switching to Volvo Penta-powered 600 kWe generators, they're saving hundreds of thousands of dollars per year in fuel and maintenance costs, not to mention less downtime.
Metso is expanding its crusher wear part offering by launching a new range of OEM crusher liners. Available for selected markets starting in September 2019, the new Metso O-Series offers the right balance between performance, affordability and reliability.
Brokk offers three new Darda concrete crushers for virtually silent operation on sensitive demolition jobs
Brokk has launched three new concrete crusher models – . The attachments, manufactured by Brokk's German sister company, Darda, offer contractors a high-performance tool for Brokk's SmartPower series, increasing operator safety and productivity on a variety of tough demolition jobs including top-down and interior demolition.
Aquajet Systems AB, a global leader in manufacturing hydrodemolition machines, offers three power packs for powering Aqua Cutters, their range of hydrodemolition robots: the standard , the and the . The power pack is a combination diesel engine and high-pressure pump, necessary for hydrodemolition.
Powerscreen is adding the Powerscreen Premiertrak 330 to its jaw crushing range. The new Premiertrak 330 is fitted with a simple, large fixed hopper improving setup time, reducing pegging and increasing the life of wear parts. The hydrostatic drive allows reversibility of the chamber, meaning the machine can unblock and run in reverse, allowing easier crushing of certain materials. In addition to this, a low engine speed improves fuel consumption and provides lower noise emissions for working in urban or restricted areas.
ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.
For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.
These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.
For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.
These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.
ShearCore has introduced their new FS145 Mobile Shear, the largest in their product line of attachments for the demolition and scrap recycling industries. Lead Designer, Ross Christenson says "the FS145 shear has been designed with less welds, fewer pieces, and is structurally stronger."
Watch Priestly Demolition's mighty machines make efficient work of demolishing the old Providence Care Hospital in Kingston, Ontario.
Superior Industries Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, says it has entered into a strategic partnership with Europe's largest manufacturer of aftermarket crusher parts. For 40-plus years, CMS Cepcor has manufactured premium crusher spares for more than three dozen active and classic brands throughout Europe. The parts manufacturer recently expanded its global footprint when it launched CMS Cepcor Americas.
Priestly Demolition is known for its tricky takedowns of old infrastructure in Ontario. Watch the company demolish a city-block-sized underground parking garage on busy Bay Street in downtown Toronto. Challenges include limited space for machine storage and need to keep roads clear for children's hospital emergency vehicle access.
Recycling waste wood can be a profitable business. This largely depends, however, on high material quality, compliance with ever-increasing environmental requirements and ensuring maximum flexibility and cost-effectiveness of the solution.
Priestly Demolition takes down the Mill Road Bridge overnight on the 401.
EvoQuip and Emerald Equipment will host an open event in New Jersey on July 25-26, 2019. This exclusive event will showcase live working demos of the company's Bison 280, Cobra 230 and 230R as well as the entire Colt range.
The Graptor Bucket for excavators and backhoe loaders, from AMI Attachments, is ideal for handling large, heavy objects or grabbing bucketfuls of debris.
Continuous expansion, high quality standards as well as short delivery deadlines made such a step necessary for the manufacturer of mobile crushing and screening machinery, Kormann Rockster Recycler GmbH from Ennsdorf. The acquisition of a 10,000 m² property in Neumarkt im Mühlkreis (Upper Austria) promises to provide a strong and needed force in a continuous growth and market demand.
Metso has signed an agreement to acquire McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, to expand Metso's offering in the aggregates industry globally and to strengthen the customer reach especially to general contractor customers.
Metso has reached the significant milestone of 10,000 Nordberg® HP cone crushers sold globally. The most popular modern cone crusher in the world, according to Metso, the HP Series celebrates its 30th anniversary this year. The 10,000th HP cone crusher unit was handed over to the French aggregates and asphalt producer and urban infrastructure development company Eurovia in a ceremony held this week at Metso's Mâcon facility in France.
Impact crushers have broad appeal across various sectors and for good reasons. Our panel of experts provides insight as to why this is, plus information on the dynamic market for impact crushers in Canada, their applications and advantages, customization and options, as well as what to consider when buying an impact crusher.
LBX Company has announced the Link-Belt 600 X4 Material Handler (MH) for the US and Canada. The 600 X4 MH features an electronically-controlled 362 horsepower Isuzu engine that meets EPA Final Tier 4 requirements, without the need for a diesel particulate filter (DPF).
Following Terex Corporation's release of its first quarter 2019 results, Terex Materials Processing (MP) is pleased to share these, along with its segment-specific results.
At Bauma 2019, Rockster not only presented its diverse range of products, but also immersed the visitors in new fields of interest. Wolfgang Kormann, CEO of Rockster Recycler from Austria, is convinced that this trade fair really deserves to be called "The World's Leading Trade Fair for Construction Machinery".
The landscape in Toronto is changing, and GFL Infrastructure Group is helping to reshape the skyline of Canada's largest city. The company recently expanded its equipment fleet by adding a Liebherr R 950 High Reach Demolition Excavator.
Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.
Aggregates equipment OEM Metso began a partnership with Volvo Penta in 2016 following increased customer demand for fuel-efficient engines. Now, it is set to install Volvo Penta's Stage V solutions as an option on its mobile crushing machines.
Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications.
Keestrack prides itself in consistently developing its worldwide manufacturing capacities. The company, which at bauma celebrated its 10,000th production machine since the legendary "4518" was introduced in 1996, is also marking the completion of its new 8740-square-metre assembly complex, the second extension phase of its main factory in Šternberk, Czech Republic. More milestones and new extension projects will be set and started in 2019, including the opening of Keestrack's Indian assembly in Neemrana and new production capacities in Ponzano Veneto, Italy.
Powerscreen showcased its revolutionary OMNI by Terex technology to help improve jobsite safety and efficiency in operating Powerscreen equipment at the recent bauma 2019.
The second generation J-1160 jaw crusher has been designed with the customer and operator in mind. In comparison to its predecessor the plant has a number of improvements such as increased under jaw clearance and all round preventative maintenance and serviceability access.