Heavy Equipment Guide Logo

This ad will close in 15 seconds

New Loftness disc mulcher for skid steers slices through vegetation like a Bad Ax

0145/36172_en_6ca4d_38677_loftness-bad-ax-mulcher.jpg

Company info

650 South Main Street
PO Box 337
Hector, MN
US, 55342

Website:
loftness.com

Phone number:
800-828-7624

Read more

Related products

Loftness has introduced its Bad Ax disc mulcher for skid steers. This high-powered forestry head is ideal for a wide range of applications, including land clearing, vegetation control, fire prevention and more.

The Bad Ax includes a fully machined, 60-inch-diameter disc designed to cut trees up to 14 inches in diameter. Because the disc contains no welds, there are no areas subject to stress cracking. The disc is driven directly by the machine's hydraulic motor to apply 100 percent of the power to the job at hand. A polyurethane coupler offers excellent vibration dampening, and the direct drive eliminates the need to maintain belts. 

The Bad Ax features recutter bars along with counter teeth to hold material in place while it is being mulched. This exclusive design allows the unit to cut the material into finer particles than competitive products are capable of producing. It also helps avoid log jams in the chamber, which can be extremely difficult to remove in other units.

Also unique to the Bad Ax is a housing design with parallel sides that provides enhanced control over funnel, or V-shaped, disc mulchers. The front of the housing is angled, allowing the teeth to mulch at ground level. A rigid discharge deflector and angled recutter bar on the Bad Ax offers more control of material discharge than hinged deflectors.

Ultra-sharp, heat-treated steel Quadco blades are used to effortlessly slice through vegetation, as opposed to shredding and tearing material. The blades can be sharpened or rotated on site to keep a fresh cutting edge and maintain machine efficiency. The blades are mounted to the disc with a single hex bolt for easy removal. The bolt-on mounts can also be replaced in the field without the need for cutting, welding or rebalancing the rotor.

Other standard features include an integrated pressure gauge, an adjustable tree-pusher bar with welded claw hooks, and anti-wrap bearing protection. Customers may choose from two available hydraulic motor options, including a fixed-displacement gear motor and an adjustable-displacement piston motor. The Bad Ax requires 70 to 120 hydraulic horsepower to operate.

More from Attachments

Fecon introduces new deck mulcher

Fecon introduces a family of stout deck mulcher attachments that are wider than conventional deck mulchers, providing more productivity per pass, even in the most demanding environments. Ruggedness and dependability are built in, with attention to detailed design to enhance performance, service life, and safety.  A robust bearing carrier houses a heavy-duty bearing with an oversized shaft.  Specially designed two-sided blades effectively double their service life without having to flip the blade.  A stump-jumper feature allows the Deck Mulcher to ride over stumps without risking bolt shearing; the extra blade mass also increases cutting inertia and enhances performance in thicker materials.  New Fecon Deck Mulchers can mulch smaller materials faster than traditional drum mulchers, making them ideal for right-of-way clearing and maintenance projects, forestry clearing, site preparation, land improvement, highway mulching and maintenance, urban interface, and more.

Hyundai's hydraulic breaker line includes 15 models to fit multiple applications

The HDB hydraulic breakers from Hyundai Construction Equipment Americas, Inc. includes 15 different models to fit multiple applications and machine sizes (up to 100 tons).
• A large chisel diameter increases the strength and durability of the chisel; four chisel options are available. 
• For use on a Hyundai excavator, standard equipped mounting brackets match up perfectly with the Hyundai linkage. When used on other excavator brands, Hyundai dealers can fit custom mounting brackets for any machine.
• Large diameter tie bolt for high performance and optimum durability. Hoses connecting the inlet/outlet ports use a new adapter type that avoids bolt breakage and oil leakage.
• Auto-greasing feature protects moving parts from undue wear.

Allied's Rammer hammers boast advanced hydraulics and an ultra-strong housing

Rammer Series boom-mounted hydraulic hammers by Allied Construction Products reflect over 70 years of experience in high performance, high-efficiency hammers known for exceptional productivity and reliability.
• Mid- and large-range models – designed for carriers from 26,500 to 176,400 pounds – feature advanced hydraulics and deliver high productivity when breaking boulders, removing slag, tunnelling, open pit mining, secondary breaking, and trenching.
• Superior design, including advanced hydraulics and an ultra-strong housing to deliver extended life and greater return on investment. Slip-fit tool bushings for easy replacement.
• Features top-down lubrication, underwater adaptation and a VIDAT System that reduces operating costs, extends operating life and minimizes downtime.

Bobcat nitrogen breakers bust rock with ease

These new nitrogen breakers from Bobcat deliver powerful impact energy and are built to high-quality standards with a simplified design that makes attachment maintenance easy.
• The six models have minimal internal parts, a single lower bushing and easily accessible grease ports. 
• Each of these design features reduces maintenance requirements and makes rebuilds easier.
• The unique valve design of the breakers lessens hydraulic pressure fluctuation, which reduces stress on the carrying equipment's hydraulic pumps.

Connect Work Tools adds CWP Pulverizer to product line

Connect Work Tools has expanded their attachments for the demolition and construction industries with the addition of the CWP Pulverizer. "The CWP Pulverizer is a great addition to our line of hydraulic attachments. Durability, reliability, and affordability are all traits we demand of our products, and the CWP Pulverizer falls right in line with the rest of our product offerings," indicates Dave Cowen, North American Sales Manager.

ALLU Transformer M-Series processes mined clay

A U.S.-based minerals company recently began using an ALLU Transformer M 3-20 material processing attachment in its Middleton, Tennessee, montmorillonite clay mine. The company purchased the mine-duty M-Series screener-crusher attachment from ALLU to use with its Hitachi 650 excavator in order to crush mined clay down to 4-in-minus and simultaneously load haul trucks. The ALLU Transformer is allowing the facility to mine land it could not previously mine, as well as process clay from boulders. The ultimate goal is to eliminate the primary crusher in the plant. The processed material is used for production of cat litter and absorbent clay for oils.

ShearCore's Fortress Cracker does double duty taking on primary and secondary demolition

ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

NPK demolition grabs efficient for sorting and recycling C&D waste

For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

Epiroc combi cutters serve up one-two crunch

These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

NPK demolition tool crushes reinforced concrete with ease

For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.

Subscribe to our free newsletter

Get our newsletter

Learn more

Caterpillar multi-processors for a variety of specialized demolition tasks

These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

Okada rotating pulverizer boasts exceptional concrete crushing ability

Okada ORC Series rotating pulverizers are designed for both primary and secondary crushing operations.
• Unique double shell-shaped wedge provides exceptional crushing ability.
• Patented Okada speed valve for faster cycle times.
• Reversible 7.1-inch-long cutter blades.
• Hard facing on wear parts.
• Manufactured with Hardox 400 steel.
• 360-degree hydraulic rotation system.
• Bracket design protects components.

AMI's Kraken crushes concrete with ease

The AMI Kraken for excavators features a series of replaceable jaw teeth that are welded into place. Longer teeth in the centre of the jaws concentrate pressure across fewer points on the initial crush of concrete while the secondary teeth adeptly crumble the concrete into manageable pieces.  
• Serrated pinch blades are made of Hardox 400 steel and provide the grip and precision required to pick up, hold and carry fine material.  
• Nose and heel, made with Bruxite 500 hard-wearing steel, give the operator fine edges for managing concrete slabs, precast structures, walls, bridge decks and asphalt.
• Three over four jaw configuration.
• The three-position bracket allows the lower jaw's angle to adjust to three different positions.

Genesis Razer X multi-jaw demolition tool available in cracker or shear jaw configurations

This tool from Genesis enables excavator operators to change jaw sets in less than two minutes, without leaving the cab.
• Heavy-duty pivot design is integral to the jaw set, providing a power curve to match the jaw's primary application.
• Reverse-mounted cylinder protects the rod from debris.
• Short, flat-top head with bolt-on bracket shortens the centre of gravity, making it easy to change mounting for different carriers.
• Available in cracker and shear jaw configurations.

Concrete doesn't stand a chance against BTI's EXC Series mechanical concrete pulverizer

These pulverizers from BTI are designed for quiet, controlled demolition and recycling of concrete structures. The concrete pulverizer uses existing excavator hydraulics, so no additional circuits are required.
• Bolt-on replaceable teeth allow for quick change-outs in the field, reducing downtime.
• Each individual tooth is replaceable, saving on parts costs.
• Unique tooth design for outstanding penetration and fragmentation.
• Superior strength with wear-resistant steel for long life and durability.

Rotar's RG sorting/demolition grab ideal for intense C&D work

Rotar's RG sorting/demolition grab is designed for intensive sorting and recycling.
• Double-walled grab trunnion with hardened, over-dimensioned pins.
• Available in open, half-open and closed teeth versions.
• Nine models for carriers 4,000 to 120,000 pounds.
• 0.13-cubic-yard to 1.96-cubic-yard capacities.
• Closing forces from 2,697 to 25,853 ft.-lbs.
• Hardox steel wear-resistant teeth.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Remu's standard screening buckets exert appropriate pressure

Remu's EE/EP series of screening buckets includes eight different models for loaders and excavators ranging from 3 to 40 tons.
• Exert a maximum pressure as low as 110 bar (1,650 psi) and as high as 250 bar (3,750 psi).
• Offer bucket volumes ranging from 0.15 cubic metres (0.18 cubic yards) to 4.2 cubic metres (5.00 cubic yards).
• Facilitate maximum flows of 25 L/min (6 gal/min) to 235 L/min (60 gal/min).
• Screening areas range from 0.2 square metres (2.2 square feet) to 2.5 square metres (27 square feet).

TEI's latest hydraulic drifter rock drill pairs with Brokk demolition machine to improve productivity and safety

Brokk has delivered a sleek, low-profile design and impressive power-to-weight ratio with the new MMB326 hydraulic drifter rock drill attachment from TEI Rock Drills. This versatile attachment seamlessly pairs with the Brokk 300 and allows for drilling multiple sizes of holes – up to 3 inches – in concrete, rock and compact soil. The attachment is manufactured with a lightweight, compact TE326 drill head featuring patented technology to improve longevity and productivity.

Subscribe to our free newsletter

Get our newsletter

Learn more

John Deere adds backhoes to its attachments lineup

John Deere has unveiled three new backhoe attachments to complement its full lineup of attachments. The BH9B, BH10B and BH11B were designed for operators handling light construction, agricultural, landscaping or utility work. Similar to other John Deere attachments, these backhoes are ideal for use on John Deere G-Series skid steers and compact track loaders. 

Genesis and Steelwrist sign agreement on SQ automatic coupler systems

As the global demand for fully automatic coupler systems is rapidly increasing, Genesis Attachments will from now on offer demolition work tools with SQ type adaptor plates directly from factory. The target is to increase productivity and reduce downtime for end users as the interface between work tools and adaptor plates can be made in a more efficient way with optimized hose routings directly from factory.

FRS15 newest addition to Fecon rotating shear attachments

Fecon introduces the FRS15, the latest addition to their lineup of attachments for 16-24 ton excavators. Made of Hardox Steel, this shear attachment provides a 360° rotation, which gives operators more reach and access to the trees and reduces repositioning of machines. A 29.5" blade opening allows the FRS15 to shear trees to 18 inches in diameter, while an accumulator arm allows gathering and continuous shearing of smaller materials. 

Engcon introduces detachable grab cassette

Engcon has launched production of the GRD70 grab cassette. Engcon has for some time been alone in producing a unique type of grab cassette. With a simple manoeuver that requires no screwing or manual connection of hydraulics, the excavator operator can connect or disconnect the grab cassette in less than one minute.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more