New scale from Alliance measures individual axles by driving over it
A new truck scale that will dynamically weigh each axle and print a receipt with individual axle weights and the total without requiring a driver to stop has been introduced by Alliance Scale, Inc.
The Alliance axleWEIGH In Motion Truck Scale weighs individual axles by simply driving over the scale at ~3 MPH and also calculates total vehicle weight regardless of truck length or configuration. Easy to use, a driver stops at the controller, enters their known tare weight or truck I.D. to recall a stored tare weight in a single pass, or can use two-pass weighing and the controller will calculate the gross, tare, and net values.
Featuring factory calibrated load cells and a preprogrammed indicator, the Alliance axleWEIGH In Motion Truck Scale yields better than ±0.5% repeat-ability on average. Preconfigured for easy installation, these dynamic weighing truck scales can be installed on a gravel driveway, eliminating the need for costly ramps. Suitable for a variety of applications, the controller can provide a CSV file with job numbers for every transaction.
As one of the latest models in the R2-Series excavator lineup, the Bobcat® E88 delivers durability, performance and quality for more productivity. Technically speaking, it's a compact machine, but it brings big performance with its redesigned engine and optimized lift performance, plus undercarriage and counterweight improvements. All these enhancements make this excavator one of the highest-performing models in its size class. With impressive over-the-side lift capacity, you can dig with greater confidence over the side of the machine. Put it to the test against similar models from other manufacturers. You'll see that the E88 can outwork the competition.