Heavy Equipment Guide Logo

This ad will close in 15 seconds

RM 70GO! processing asphalt and concrete

Company info

393 Pilot Dr.
Valparaiso, IN
US, 46383

Website:
rubblemaster-americas.com

Read more

Related products

Rubble Master was recently part of a demo site clean-up in Newark, NJ. Turning asphalt & concrete into base material on-site.

According to Rubble Master, considering the conventional way of doing the job - with all related trucking expenses, disposal fees and re-purchase of material - this job would have been tough. By crushing & recycling on-site, the contractor saved more than $30,000.


More from C&D Recycling

Metso launches new Nordtrack mobile crushing and screening product range

Metso is expanding its mobile crushing and screening solutions offering for the aggregates industry with an extensive new product portfolio. The new Metso Nordtrack range introduces 19 products designed to meet the requirements of general contractors in particular. The first deliveries are expected to take place during the first quarter of 2020.

McCloskey acquisition by Metso completed

Metso's acquisition of McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, has been successfully completed. With this acquisition, Metso expands its offering in the aggregates industry globally and strengthens its customer reach especially to the general contractor segment. The acquisition was completed on October 1, 2019.

Priestly Demolition uses Mantovanibenne combi cutter to tear down old Toronto SickKids building

When it comes to large scale demolition, Mantovanibenne's combination crushers are ideal tools for tackling reinforced concrete and metal structures. These Italian-made attachments incorporate characteristics of crushers and shears to deliver performance even in the toughest of situations. These crushers' performance comes from the powerful cylinders and the twin pin system that contribute to the breaking and cutting force. The jaws incorporate sharp shear shaped blades that guide the cutting power to be executed in a clean controllable manner for the operator.

Thompson Recycle Company slashes fuel and maintenance costs, minimizes downtime with Volvo Penta-powered generators

Thompson Recycle Company reprocesses mountains of used asphalt rubble every year with its three mobile crushing plants in Michigan. The mobile plants use generators as their prime power source at road construction sites. Since switching to Volvo Penta-powered 600 kWe generators, they're saving hundreds of thousands of dollars per year in fuel and maintenance costs, not to mention less downtime.

Brokk offers three new Darda concrete crushers for virtually silent operation on sensitive demolition jobs

Brokk has launched three new concrete crusher models – the CC440, CC480 and CC580. The attachments, manufactured by Brokk's German sister company, Darda, offer contractors a high-performance tool for Brokk's Next Generation SmartPower series, increasing operator safety and productivity on a variety of tough demolition jobs including top-down and interior demolition.

Aquajet Systems offers three aqua power packs for efficient hydrodemolition operation

Aquajet Systems AB, a global leader in manufacturing hydrodemolition machines, offers three power packs for powering Aqua Cutters, their range of hydrodemolition robots: the standard Aqua Power Pack, the Ecosilence and the Aqua Skid. The power pack is a combination diesel engine and high-pressure pump, necessary for hydrodemolition.

Subscribe to our free newsletter

Get our newsletter

Learn more

Powerscreen adding Premiertrak 330 to jaw crusher range

Powerscreen is adding the Powerscreen Premiertrak 330 to its jaw crushing range. The new Premiertrak 330 is fitted with a simple, large fixed hopper improving setup time, reducing pegging and increasing the life of wear parts. The hydrostatic drive allows reversibility of the chamber, meaning the machine can unblock and run in reverse, allowing easier crushing of certain materials. In addition to this, a low engine speed improves fuel consumption and provides lower noise emissions for working in urban or restricted areas.

ShearCore's Fortress Cracker does double duty taking on primary and secondary demolition

ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

NPK demolition grabs efficient for sorting and recycling C&D waste

For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

Epiroc combi cutters serve up one-two crunch

These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

NPK demolition tool crushes reinforced concrete with ease

For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.

Caterpillar multi-processors for a variety of specialized demolition tasks

These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

Superior and CMS Cepcor create partnership for crusher parts in North America

Superior Industries Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, says it has entered into a strategic partnership with Europe's largest manufacturer of aftermarket crusher parts. For 40-plus years, CMS Cepcor has manufactured premium crusher spares for more than three dozen active and classic brands throughout Europe. The parts manufacturer recently expanded its global footprint when it launched CMS Cepcor Americas.

Watch Priestly Demolition demolish underground parking garage in confined downtown Toronto

Priestly Demolition is known for its tricky takedowns of old infrastructure in Ontario. Watch the company demolish a city-block-sized underground parking garage on busy Bay Street in downtown Toronto. Challenges include limited space for machine storage and need to keep roads clear for children's hospital emergency vehicle access.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

New location to double production capacity for Rockster

Continuous expansion, high quality standards as well as short delivery deadlines made such a step necessary for the manufacturer of mobile crushing and screening machinery, Kormann Rockster Recycler GmbH from Ennsdorf. The acquisition of a 10,000 m² property in Neumarkt im Mühlkreis (Upper Austria) promises to provide a strong and needed force in a continuous growth and market demand.

Metso celebrates milestone of 10,000 HP Series cone crushers sold

Metso has reached the significant milestone of 10,000 Nordberg® HP cone crushers sold globally. The most popular modern cone crusher in the world, according to Metso, the HP Series celebrates its 30th anniversary this year. The 10,000th HP cone crusher unit was handed over to the French aggregates and asphalt producer and urban infrastructure development company Eurovia in a ceremony held this week at Metso's Mâcon facility in France.

Subscribe to our free newsletter

Get our newsletter

Learn more

New Pitbull Grizzly screen an economical option for small- to mid-sized contractors

Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.

Terex Finlay introduces 883+ triple shaft heavy duty screener

Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications. 

Keestrack extends worldwide manufacturing

Keestrack prides itself in consistently developing its worldwide manufacturing capacities. The company, which at bauma celebrated its 10,000th production machine since the legendary "4518" was introduced in 1996, is also marking the completion of its new 8740-square-metre assembly complex, the second extension phase of its main factory in Šternberk, Czech Republic. More milestones and new extension projects will be set and started in 2019, including the opening of Keestrack's Indian assembly in Neemrana and new production capacities in Ponzano Veneto, Italy.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more