Heavy Equipment Guide Logo

This ad will close in 15 seconds

Extendo telehandler line lengthens with 74-hp machine

0127/31646_en_d2324_34519_pettibone-extendo-944b-74hp.jpg

Company info

1100 Superior Ave.
Baraga, MI
US, 49908

Website:
gopettibone.com

Phone number:
906-353-4800

Read more

Related products

Pettibone has introduced a 74-horsepower engine option for its Extendo 944B telehandler, giving end users and rental operators another material handling solution to fit their needs.

The 74-horsepower Cummins QSF 3.8 Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). This simplified exhaust system is more compact and eliminates the need for the MD3 aftertreatment display found on the standard 944B model. Drivetrain and axles have been optimized with the 74-horsepower engine to provide greater tractive effort with minimal tradeoff on top end speed.

"The 74-horsepower Extendo 944B is less complex when it comes to sensors and filtration, so it really simplifies routine maintenance," said Bob Mayo, product manager for Pettibone. "At the same time, users will get the same lifting capacity and performance they've come to expect from Pettibone. This option just gives people another choice that might better suit their operation."

Delivering a maximum load capacity of 9,000 pounds, the 944B provides forward reach up to 30 feet, 3 inches, and a maximum lift height of 44 feet, 4 inches. Single joystick, pilot operated controls allow for smooth control of all the Extendo's boom and auxiliary hydraulics. For operation in tight areas, the 944B offers 4-wheel, 2-wheel and crab steering modes.

The robust design of the Extendo features two wide-stance, heavy-duty lift cylinders with innovative automatic fork and load leveling that eliminates the need for slave cylinders. To further improve load stability, the 944B offers 24 degrees of frame sway (12 degrees left and right of center) and is equipped with a rear axle stabilization system.

More from Cranes & Lift

Washington State bridge goes up in shorter span thanks to Manitowoc MLC300

Ceccanti, a Tacoma, Washington-based construction company, needed a crane with superior maneuverability that could handle heavy loads at great heights to assist with the replacement of an old wooden bridge in Ridgefield, Washington. The contractor found the MLC300 crawler crane had the right features to get the job done in the shortest time possible.

Genie's new High Float and TraX booms tread lightly on soft ground

Designed to perform in sensitive ground conditions, such as sand and turf, Genie High Float (HF) and TraX boom lifts offer productive machine performance on soft or delicate surfaces. To meet market demand, new models have been added to the Genie product lineup, including the Genie Z-45 HF, S-40 HF, S-45 HF, S-60 HF and S-65 HF booms, as well as the Genie S-40 TraX, S-45 TraX, S-60 TraX and S-65 TraX machines. All of these new Genie models are based on the design and engineering of the Genie Xtra Capacity (XC) booms, complying with the platform load sensing requirements and terrain sensing guidelines in the new ANSI A92 and CSA B354 industry standards in North America, as well as European EN280 and Australian AS 1418.10 standards.     

Operator training is not the finish line, it’s the starting point

Many users and owners of mobile elevating work platforms (MEWPs, formerly known as AWPs) believe that operator training is the ultimate goal of a safe-use program. They think that when personnel complete operator training, they immediately know everything required to ensure safe MEWP operations. In fact, operator training is now clearly identified as only one component in a comprehensive MEWP-specific safe-use program, which is the fundamental responsibility of the new ANSI A92.22 Safe Use standard, which goes into effect this December.

Canadian crane company credits Liebherr cranes for quality work

The LaPrairie group of companies, based in Western Canada, recently invested in nine new Liebherr machines. For their businesses in the construction and mining industry as well as in the oil and gas sector, especially, the new Rough Terrain cranes are important add-ons to the fleet. The LRT cranes are used in long-term jobs to free the existing fleet of All-Terrain cranes for their typical taxi crane jobs. Rough Terrain cranes are usually requested by LaPrairie's customers without crane drivers. Therefore the ease-of-use and safety of crane and operator were some of the decisive arguments during the selection process for the Rough Terrain Cranes.

Grove crane teams up with helicopter to install antenna on radio tower

Digging and Rigging, a crane and rigging company based out of Mount Airy, Maryland, deployed a Grove TMS500-2 truck crane to assist a helicopter with the installation of a new radio tower in Clear Spring, Maryland. The helicopter air-lifted the 5-USt tower antenna while the truck crane helped tail it until it was in a complete vertical position.

Addition of Demag crane nearly doubles Superior Cranes lifting capacity

Superior Cranes, Inc. of Rockingham, N.C., recently purchased the 1,375 USt (1,250 t) capacity class Demag CC 6800-1 crawler crane for its operations in the United States. With few crawler cranes in this class size operating in North America, the acquisition gives the company an advantage with lifting opportunities requiring specialized high-lift capacities.

New National Crane boom truck from Manitowoc features long boom, high capacity

The Manitowoc Company has launched the NBT60L, the latest addition to its National Crane boom truck product line. This 60 USt product offering now features the longest boom length in its tonnage class with 151 feet of main boom and a maximum main boom height of 161 feet. It can be equipped with an optional 36 foot off-settable lattice jib that reaches a 196 foot maximum tip height, providing a  combination of exceptional capacity and reach. 

Subscribe to our free newsletter

Get our newsletter

Learn more

ICUEE 2019: What to see at the demo expo, part four

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

First Demag AC 45 City deployed in North America

"Large lifting companies with multiple cranes have options to get jobs done. I don't have that luxury," comments Steve Kelly, owner/operator of Steel Giraffe LLC. The Portsmouth, R.I.-based "boutique" crane company doesn't search out the typical residential and commercial construction projects. Rather, Steel Giraffe completes specialized lifting projects, and 90 percent of its lift jobs fall within a 30-mi (48-km) radius of the headquarters location.

Manitowoc launches strong and versatile Potain MCT 325

Manitowoc has launched the Potain MCT 325 to further expand its popular MCT range of topless cranes. As with other cranes in the range, the MCT 325 is designed to deliver easier transport and assembly, plus high efficiency and reliability on construction projects. The company unveiled the new crane during a special event at Manitowoc's factory in Zhangjiagang, China on August 29, where the 16 t version of the MCT 325 was displayed with its full 75 m jib. 

Terex Utilities to demo products & technology at ICUEE

Terex Utilities will feature a range of technologies and equipment during the 2019 International Construction & Utility Equipment Expo (ICUEE) in Louisville, Kentucky. "ICUEE presents a unique opportunity for Terex to engage with customers through live equipment demonstrations," said Joe Caywood, director of marketing. "Likewise, it gives industry stakeholders a chance to identify the product solutions that are important for their success."

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Shawmut Equipment opens new facility in Halifax to support demand for Manitowoc cranes

Shawmut Equipment of Canada, one of Manitowoc Crane's dealer partners for success in North America, has opened a new facility in Elmsdale, near Halifax in Nova Scotia. The new location will serve as the company's Canadian headquarters, and comes as demand for its products and services has been constantly expanding in the region. 

Micro 26 – MEC’s next Micro Scissor

MEC Aerial Work Platforms extended its Micro Scissors offering and extensive line of DC electric slab scissors with the all-new Micro 26 slab scissor lift. According to MEC there is strong demand for a traditional construction-duty scissor lift that enables work up to 32 feet with a smaller footprint for easier access and maneuverability. MEC's Micro 26 fulfills this need with its short length of 74 inches, making it superior in its height class with a compact size almost 2 feet shorter in length than other 26 foot scissor lifts in the market.

Terex Utilities updates load alert monitor display

Terex Utilities has updated the monitor display for the Terex Load Alert system. Load Alert monitors and analyzes the truck's jib and platform capacity and boom positions on Terex aerial devices. It provides visible and audible alerts when an overload is detected. 

Terex AWP celebrates milestone in production

Within two months, Terex Aerial Work Platforms (AWP) Changzhou plant will celebrate the production of the 1,000th Genie GS-1330m scissor lift, introduced globally in early 2019, manufactured in the factory. This milestone is a testament to the great success of the facility's production capabilities in China and shows the brand's capacity to ramp-up production to meet high global demand for this product.

Tadano acquisition of Demag Mobile Cranes ushers in new era

Tadano Ltd. completed its $215 million acquisition of the Demag Mobile Cranes business on August 1. The transaction brings together two of the top names in the lifting equipment industry - each well known for safety, quality, innovation, and performance. The Tadano and Demag brands now leverage a long combined history of manufacturing and lifting experience. Working together, we will push forward, innovate, and contribute to the success of our customers worldwide.

Magni reaches new heights with Liebherr

Magni's company history is short, but nonetheless astonishing: in just five years, the Italian manufacturer has become the premium provider of rotary telehandlers. These machines make load handling easy at heights of up to 46 metres, with impressive flexibility, precision and safety - not least thanks to the three-stage slewing drives from Liebherr Components. The Italian-German partnership is, therefore, a win-win situation for both companies.

Raimondi releases heavyweight luffing tower crane

Raimondi Cranes has unveiled the latest heavyweight addition to its advanced luffing range, the LR372. Equipped with Raimondi's next generation high performance winches, the LR372 is a 370 ton-metre class luffing tower crane with a maximum jib length of 60 metres and a maximum capacity of 20,000 kg in two falls configuration. At the maximum radius, the LR372 can lift 3,795 kg using Ultralift mode, making this Raimondi's most powerful luffing crane to date. 

Manitowoc adds B.C. and eastern U.S. dealers to EnCORE program

Manitowoc has added two new partners as EnCORE certified hydraulic cylinder repair specialists in North America. Select Fluid Power (Langley, British Columbia, Canada) and Ring Power Crane (Riverview, Florida) expand the EnCORE certified coverage network for Manitowoc's hydraulic cylinder repairs and return program, bringing the total to four partners across North America. 

The benefits of using certified EnCORE repair shops include: 
  • Cylinders are warrantied for a full year.
  • Cylinders are restored to original equipment manufacturer (OEM) specifications.
  • Only OEM parts are used for repairs.
  • Cylinders are refurbished to like-new condition. 
Subscribe to our free newsletter

Get our newsletter

Learn more

Three things to know about the ANSI experience

The industry has been alive with discussion over the past couple of years about the new ANSI standards and the changes to the design, training, and safe use of what's now known as Mobile Elevating Work Platforms (MEWPs). Many OEMs have published papers on the upcoming changes to their equipment but, now that these machines are in production, it's time to focus on the ANSI experience. 

First Canadian Demag 300-6 all-terrain crane commissioned by Modern Crane

Milton, Ontario based Modern Crane received Canada's first Demag AC 300-6 all terrain crane. The company purchased the new crane from Terex Cranes distributor, Cropac Equipment, and plans to use it to assemble tower cranes. Modern Crane is a division of the Pumpcrete Corporation, which is highly active in the heavy lifting, concrete pumping sectors, heavy haul and transportation.

Enerpac introduces new self-locking cube jack

The Self-Locking Cube Jack from Enerpac offers a new compact and portable hydraulic solution for incremental lifting and lowering of heavy loads. The SCJ-50 Cube Jack uses a base lifting frame and self-aligning, lightweight steel cribbing blocks to provide high-capacity and stabilized lifting - offering a safer, controlled and more efficient alternative to climbing jacks with wooden cribbing.

Terex adds new commercial team for rough terrain and tower cranes

Terex Cranes announces the formation of a new commercial team to manage the sales, support and training efforts for Terex rough terrain (RT) and tower crane lines in the Americas. Long-time Terex team member, Chris Johnson, will direct efforts for North America, while Manuel Vicuña Galarreta has been tapped to drive growth in Central and South America. Both will report directly to recently appointed Global Director of Sales for Tower Cranes and Rough Terrain Cranes, Lee Maynard. 

Genie adds two more XC models to telescopic boom lineup

Genie's S-40 and S-45 telescopic booms have been updated to incorporate Genie Xtra Capacity (XC) features. The new Genie telescopic S-40 XC and S-45 XC booms now offer a dual-lift capacity of 660 pounds (300 kg) unrestricted and 1,000 pounds (454 kg) restricted, giving these aerial lifts the ability to perform a wider range of heavier lift tasks on construction and industrial jobsites. These models can work with up to three people in the platform while still leaving room for tools and jobsite materials. 

High and mighty: an in-depth report on all-terrain cranes

All-terrain cranes are big machines designed for specialized applications, whether that is construction and maintenance in the oil fields, assembling tower cranes, or lifting HVAC units to the top of buildings. There are many things to consider when bringing an all-terrain crane to a jobsite – including road and bridge regulations, safety and training for the operators, and space on the jobsite in more condensed areas, as well as the costs that go beyond the sticker price of the equipment. We asked a panel of industry experts to share their insight on these topics and more.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more