Heavy Equipment Guide Logo

This ad will close in 15 seconds

New Holland Construction Adds C234 to Compact Track Loader Line-up

All-new model includes improved CTL track carrier design and heavy-duty steel features

0123/30665_en_a70b1_33554_c234-4b-038-m.jpg

New Holland is enhancing its New Holland Skid Steer and Compact Track Loader line-ups with the launch of its C234 compact track loader. The new C234 features a 90 HP engine, radial lift geometry, 17.7 inch tracks to provide low ground pressure of 4.4 psi, and one of the widest cabs in the industry.

“This machine is your “go-to” basement or in-ground pool digging machine, a rental yard ‘must-have,’ and the ultimate machine for stump grinding, rock saws, and cold planers,” said Bradley Wenger, Construction Equipment Marketing Specialist at New Holland North America. “The new C234 is ready for your toughest job sites; it comes packed with a ton of power and is built heavy-duty all around.”

The C234 works even harder on the jobsite for you, with features including the low-profile undercarriage design, introduced in February 2016, proven to hold up under intense testing to deliver longer carrier life. The improved yoke-to-frame engagement produces less noise with the potential for reduced operator fatigue and results in overall improved track alignment and easier cleanout due to the increased area between the tracks.

Other features include a 3,400-lb rated operating capacity at 50-percent tipping load, and strong bucket tip and lift breakout forces of 8,700 lbs. Made for heavy-duty construction, the C234 is built with heavy-duty steel rear door and hood, along with new steel front work lights with side lamps for extra visibility during night-time operation. The new steel front work lights with side lamps are now available on all of New Holland’s skid steer and compact track loader models. 

More from Earthmoving

How to get the most out of each gallon

Fuel is one of the greatest operating costs for any contractor who owns heavy equipment and/or trucks. Working in a way that can save fuel can end up saving a lot of money.

The 60,000th Liebherr crawler excavator on the Champs Elysées

Within the framework of organising a Liebherr event at the House of Alsace, in the heart of the Champs Elysées, the 60,000th Liebherr crawler excavator occupied a very special place on the world's most beautiful avenue on 12 and 13 September. The perfect way to showcase the expertise and continuity of the historic Liebherr production site in France, in Colmar, Alsace.

Ditch Witch's largest stand-on skid steer delivers 5,500 pounds of breakout force

Hardscape, landscape and tree care operators looking to step outside the cab and gain a 360-degree view of the jobsite, without compromising power, can now turn to the Ditch Witch SK3000. The new Ditch Witch SK3000 full-sized stand-on skid steer is built with the power to complete a wide range of landscape, hardscape and tree-care projects typically reserved for traditional skid steers, but with the convenience of a stand-on machine.

Cat's new 6-ton-class mini hydraulic excavator features Cat Stick Steer for improved operator control

The new Cat 306 CR Mini Hydraulic Excavator marks Caterpillar's entry in the 6-ton class offering. Designed with an improved customer experience in mind, the 306 CR mini excavator is built to exceed customer expectations with strong performance, enhanced operator experience and simplified maintenance with extended service intervals. With standard exclusive features like stick steer and new LCD monitor, it provides a great value for customers and boasts industry leading performance, according to Caterpillar.

Subscribe to our free newsletter

Get our newsletter

Learn more

Bobcat's new articulated loaders squeeze into small spaces

Bobcat's new small articulated loaders provide customers in landscaping, tree care, tree removal and facility maintenance a great option to minimize workload and complete projects quickly and efficiently. These machines have the ability to fit into backyard areas and are capable of carrying small pallets of block or landscape materials with low turf disturbance. 

John Deere updates JDLink with new notification centre, improved mobile app

Designed to improve user experience for intelligent machine management, John Deere Construction & Forestry is adding new capabilities to its JDLink platform, including notifications and adjustments to JDLink Mobile. These updates will assist in further driving valuable machine insights and providing a fast, reliable, easy-to-use telematics solution.

JCB's first electric mini excavator now available in North America

JCB's 19C-1E, the company's first fully electric mini excavator, is now available in the United States and Canada. The 2-ton (1.9-tonne) 19C-1E is ideally suited to construction and excavation applications within enclosed or urban jobsites, or noise- and emissions-sensitive environments such as hospitals and schools. It offers the same power as JCB's diesel-powered 19C excavator yet produces zero exhaust emissions and one-fifth of the noise. 

Preventing damage to buried utilities

When you start up an excavator or a backhoe and begin to dig, do you ever consider the risks? Just beneath our feet are hundreds of thousands of kilometres of pipes and cables, that crisscross the country and provide the essential services that we rely on every single day. This underground infrastructure is a crucial component for the comfort, productivity and safety that we expect in our day-to-day lives: it distributes electricity, natural gas and clean drinking water, as well as cell service and internet – facilitating both electronic communication and financial transactions. Striking a buried utility line can result in inconvenient outages for entire neighbourhoods, and even cause harm to yourself or others. A damaged utility line will require expensive repairs and can result in fines, penalties and litigation.

JCB North America's largest wheel loader now has high-lift option

JCB is offering a new high-lift (HL) loader arm option for its 457 HT wheel loader. With a hinge pin height of 15 feet 5 inches – 23 inches higher than the standard ZX loader arm – the JCB 457 HT HL is now the highest lifting four-cylinder, 4.5-cubic-yard loader available in North America. 

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

ICUEE 2019: What to see at the demo expo, part four

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

ICUEE 2019: What to see at the demo expo, part three

ICUEE, the International Construction & Utility Equipment Exposition, will take place October 1-3 in Louisville, Kentucky. ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Contractors hit compaction quality targets with Cat COMMAND

Caterpillar has announced the release of Cat COMMAND for Compaction, an operator-assisted technology that automates the soil compaction process and helps contractors achieve compaction quality. The COMMAND for Compaction system is available for use on select Cat vibratory soil compactors as a dealer installed kit on both new and existing B-Series machines.

JCB brings 13- and 15-ton X-Series excavators to North America

JCB today announced the availability of two new X Series excavators in North America, the 13-ton 131X and the 15-ton 150X. Like the 220X introduced in 2018, the two new X Series models result from JCB's four-year development program to create the industry's most productive, comfortable and easy-to-use large tracked excavators.

Zero/60 Financing Now Available on CASE Compact Wheel Loaders

Through the end of September, contractors can get behind the controls of a new CASE compact wheel loader for zero percent financing for 60 months! This allows businesses to invest in their fleet knowing their payments are going towards the machine and not financed interest! CASE compact wheel loaders are the perfect machine for supply yard work, snow removal, and for those contractors who need more lifting power and reach than made possible with skid steers or compact track loaders, but who don't need a full-sized wheel loader.

Subscribe to our free newsletter

Get our newsletter

Learn more

Teen contractor owns his company and his future

Lance Matheson from Layton, Utah, is not your average kid – most 14 year olds don't operate excavators, let alone run their own contracting business! Learn how Lance started Sage Demolition and Land Clearing and his plans for the future of the company in these videos from Volvo.

Digitalization drives improved maintenance

Evolved technology is changing the game within the industrial equipment landscape. With a variety of new technological advances happening at the blink of an eye, your machine maintenance process no longer needs to rely on outdated data or guesswork to get the job done. 

Bell exclusively selects Allison Transmissions for articulated dump trucks

Allison Transmission Holdings Inc. announced a partnership with Bell Equipment. In addition to utilizing the Allison 4800 ORS in an industry leading 60- ton articulated dump truck (ADT), Allison introduced the 3400ORS transmission for the Bell B30E (ADT). Additionally, the South African manufacturer has recently announced the extension of Allison Transmission as their exclusive transmission supplier for the next five years.

Caterpillar rolls out 16 new D3 Series skid-steer and compact track loaders

Caterpillar has released 16 new Cat D3 Series skid-steer loader (SSL) and compact track loader (CTL) models. These new machines advance the D and D2 Series' reputation for quality, comfort, and performance and deliver improvements in operator experience, and track loader stability. An industry first, the D3 Series models also support a line of new Smart Attachments. This advanced machine technology recognizes certain attachments and tailors the controls and operator information to match the tool and the task.

Low ground pressure dozer from Komatsu ideal for numerous applications

Komatsu America has introduced the 354-horsepower D155AX-8 LGP (low ground pressure) dozer which incorporates proven Komatsu technology used in the D155AX-8, enhanced with two blade options and more track on the ground. With 12% wider track gauge, 9% longer track on ground and 47% lower ground pressure than the standard model, the D155AX-8 LGP offers improved performance, flotation and stability.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more