Poll: Infrastructure concerns unite American voters in divisive election year

With 90 days left before Election Day, a national poll released Tuesday by the Association of Equipment Manufacturers (AEM) found that half of registered voters say the nation’s infrastructure has gotten worse over the last five years, and a majority of voters said roads and bridges are in “extreme” need of repair.

The findings were part of a new national poll commissioned by AEM to gauge voter perceptions and attitudes about the current and future state of U.S. infrastructure amid a high-profile election. The poll found that registered voters, regardless of political affiliation, recognize the declining state of the nation’s infrastructure as an issue that should be addressed and believe that the federal government should do more to improve infrastructure across the board.

“Americans across the political spectrum understand the dire state of U.S. infrastructure and believe that the federal government should do more to improve our infrastructure,” said Dennis Slater, president of AEM. “Voters recognized that increased federal funding for assets such as roads, bridges and inland waterways will have a positive impact on the economy, and they are looking to the federal government to repair and modernize.”

The national poll identified a number of key findings, including:

  • Nearly half (46 percent) of registered voters believe that the state of the nation’s infrastructure has gotten worse in the last five years.
  • A significant majority (80 – 90 percent) of registered voters say that roads, bridges and energy grids are in some or extreme need of repairs.
  • Half (49 percent) of the surveyed population feel that the federal government is primarily responsible for funding repairs to the nation’s infrastructure.
  • Seven out of every ten registered voters say increasing federal funding for infrastructure will have a positive impact on the economy.
  • More than eight out of every ten Americans consider water infrastructure (86 percent), solar powered homes (83 percent) and smart infrastructure (82 percent) as the top three important innovations for the future of infrastructure.
  • Voters across the political spectrum think that the federal government should do more to improve the nation’s overall infrastructure, with 68 percent of Republicans, 70 percent of Independents and 76 percent of Democrats sharing this sentiment.

Registered voters also feel that government across the board should be doing more to improve the nation’s overall infrastructure, with 76 percent of individuals surveyed wanting more from state governments, 72 percent looking to the federal government to do more and 70 percent expecting more from local governments.

“Both presidential nominees have voiced their strong support for infrastructure investment,” said Ron De Feo, CEO of Kennametal and chairman of AEM’s Infrastructure Vision 2050 initiative. “The specific ideas and proposals they offer over the next 90 days will be critically important, and voters should consider them carefully on Election Day.”

The national poll was conducted as part of AEM’s ongoing efforts to develop a long-term national vision for U.S. infrastructure. An analysis of the national poll results is available here.

Company Info

  • Association of Equipment Manufacturers (AEM)

    6737 West Washington Street, Suite 2400
    Milwaukee , WI
    US , 53214-5647

    AEM is the North American-based international trade group providing innovative business development resources to advance the off-road equipment manufacturing industry in the global marketplace. AEM membership comprises more than 950 companies and more than 200 product lines in the agriculture, construction, forestry, mining and utility sectors worldwide. AEM is headquartered in Milwaukee, Wisconsin, with offices in the world capitals of Washington, D.C.; Ottawa, Canada; and Beijing, China

    Read more

Latest News

Tags
Shows & Events

Liebherr displaying concrete pumps and wheel loader at World of Concrete

The 50 M5 XXT features a powerful pump unit that delivers an output of up to 213 yd³/h. This is a long stroke version with a conveyance stroke of 2,000 mm, which is particularly smooth and efficient.

Liebherr USA, Co. Concrete Technology and Construction Equipment divisions are showing  World of Concrete attendees the L 538 Wheel loader, 50 M5 XXT and the 37 Z4 XXT truck-mounted concrete pumps.

Read More

Tags
Industry News

Trelleborg acquires tire distributor in Canada

Pneu ICM is the second largest industrial tire dealer in the Montreal area, and a main service provider for eastern Canada. With annual sales of approximately C$3.39 M (SEK 23 M), this bolt-on acquisition is part of Trelleborg's strategy to strengthen its positions in attractive market segments.

Trelleborg, through its Trelleborg Wheel Systems business area, has signed an agreement and finalized the acquisition of privately owned Pneus ICM Inc — a specialized industrial tire service provider and distributor in Montreal, Canada.

Read More

Tags
Trucking

Allison Provides Commercial-Duty Transmissions for the New International® CV Series

The release of the Allison 1000/2000 transmission in the International CV Series Class 4/5 truck offers customers a great solution for their commercial vehicles.

With proven durability and reliability in the commercial truck segment, the Allison 1000 Series and 2000 Series are the exclusive fully automatic transmissions for the newly introduced International CV Series vocational trucks.

Read More

Tags
Industry News

Increased tiltrotator sales and predicted growth behind Rototilt factory expansion

Rototilt has more than doubled its sales in five years and foresees continued strong growth.

With another year of busy growth for Rototilt Group, with increased sales and continued growth on the export markets, Rototilt foresees continued success and is expanding its factory in Sweden by more than 3,000 square metres. "With the tremendous growth we are seeing in North America along with other emerging markets it is great to see the expanded factory investment commitment to meet the growing global demand for Rototilt tiltrotators," says Gerry Mallory, general manager, Rototilt Inc.

Read More

Tags
Attachments

Cat multi-processors feature quick-change jaws, greater cutting/crushing forces, increased speed, durable design

The new multi-processor models are designed with

Three new Cat MP332, MP345 and MP365 Multi-Processor models are heavy-duty, high-production tools that accept multiple interchangeable jaws for taking on a variety of specialized demolition tasks. The new models, compared with previous models, can cycle 50 percent faster and generate up to 19 percent greater cutting/crushing forces. An innovative locking system enables a single operator to typically change jaw types in 15 minutes or less, using only standard hand tools. An included stand securely and stably holds unused jaw sets.

  • Concrete Cutter: outer jaw cracks concrete, inner jaw shears steel
  • Demolition: cracks thick concrete structures
  • Pulverizer: crushes concrete, separates rebar
  • Shear: cuts structural steel, pipe, cable
  • Tank Shear: cleanly cuts tanks or plate steel at right angle on three sides
  • Universal: cuts steel and crushes concrete

Read More

Tags
Shows & Events

Hyundai to exhibit upgrades and new attachments at World of Concrete 2019

The 197-hp Hyundai HL955 wheel loader displayed at World of Concrete will feature the Hyundai exclusive AAMV (All-Around View Monitoring) system that uses four cameras to provide a 360-degree-surround virtual operating view of the wheel loader's working environment.

Hyundai Construction Equipment Americas will feature a variety of recently upgraded models and newly available third-party attachments at World of Concrete (Booth C7027). The company is also displaying its Hyundai HX130LCR hydraulic excavator for the first time since the model's recent introduction.

Read More

Tags
Shows & Events

Honda Power Equipment to display generators and pumps at World of Concrete

Among the Honda generators highlighted at this year's show will be the all-new Honda EU2200i Super Quiet Series generator that offers tremendous value to users, delivering 10 percent more power (200 watts) than the EU2000i it replaces—all at the same price.

At World of Concrete, the Honda Power Equipment team will showcase a number of its power products for commercial applications at its outdoor booth #O31200. Front and centre will be the Honda comprehensive line of generators – models providing smooth, dependable power for construction, rental, emergency and recreation applications. All Honda generators are powered by advanced Honda four-stroke engines and incorporate technology that make Honda generators among the world's quietest.

Read More

Tags
Shows & Events

Honda Engines to unveil new additions to commercial engine lineup at World of Concrete

At World of Concrete 2019, January 22-25 at the Las Vegas Convention Center, booth #C4341, the Honda Engines team will unveil powerful new additions to its general purpose commercial engine lineup—models that offer commercial construction and turf industry customers more versatile power and greater adaptability with exceptional fuel efficiency in a compact package.

At World of Concrete 2019, the Honda Engines team will unveil powerful new additions to its general purpose commercial engine lineup – models that offer commercial construction and turf industry customers more versatile power and greater adaptability with exceptional fuel efficiency in a compact package.

  • The Cyclone Air Cleaner, available on the Honda GX160, GX200, GX270 and GX390 engine models, features a smaller footprint and a more compact design than the legacy cleaner it replaced. The Cyclone Air Cleaner fits within the overall engine shape and targets OEM applications where overall engine dimensions are critical.
  • The Honda GXR120 general purpose engine, a model uniquely developed as an ideal source of power for rammers – equipment used to compact soil or other granular material. Offered as a second power option to the reliable GX100 engine, the GXR120 engine is designed to provide superb durability and reliability for heavy-duty applications.
  • Offering the same quality and durability attributes of the GX series engines, GX Pressure Washer Optimized Industrial Series engines are specifically designed for direct-drive pressure washer applications; the Optimized series is available with Honda GX160, GX200, GX270 and GX390 engines. The model lineup delivers Honda's smooth and reliable power, maximized engine performance at wide-open throttle and increased power output in the GX200 and GX390 series engines. These engines also offer a fixed throttle, enabling superior performance, making them ideal for the rental market.

Read More

Tags
Earthmoving

Takeuchi's new 5-ton compact hydraulic excavator is a versatile tool carrier

Serviceability of the TB250-2 is easy to perform due to the large hoods, which open overhead providing access to key daily inspection points, pattern change valve, selector valve, control valve, battery and toolbox.

Takeuchi-US has released a new compact excavator, the TB250-2. Weighing 10,957 pounds (canopy), the machine provides Takeuchi with a true 5-ton excavator offering that is suited for a wide range of applications including landscape, general contracting and rental. 

Read More

Tags
Cranes & Lifts
Construction Technologies

JLG expands its BIM library to include all equipment models

BIM is an intelligent 3D-model-based process that gives architecture and construction professionals the insight and tools to more efficiently plan, design, construct and manage buildings and infrastructure projects.

JLG Industries, Inc. has expanded its BIM (building information modelling) library to now include the company's compact crawler booms, making the full JLG product line available for download on www.bimobject.com, an industry leading platform for BIM, with select models available directly through JLG.com.

Read More

Tags
Construction Technologies

CostTrax time and materials tracking software features built-in cost-control and compliance

CostTrax is entirely web-based and requires no software to download — it can be accessed from any computer or device with an internet connection.

CostTrax, powered by EquipmentWatch, is a new software solution that streamlines reporting, automatically flags questionable expenses, and ensures every reimbursement request is 100 percent compliant.

Read More

Tags
Industry News

Husky ends pursuit of MEG Energy after offer expires

Potential divestment of Husky’s retail business and Prince George Refinery will continue; proceeds provide for enhanced cash returns to shareholders and accelerating organic growth investments.

Husky Energy has announced that its offer for MEG Energy expired on January 16 and that the minimum tender condition was not met. Due to insufficient MEG Board and shareholder support, Husky has decided not to extend its offer.

Read More

Tags
Aggregates
C&D Recycling

Metso to expand NW Rapid crushing plant range

The NW Rapid series models are electric driven and they have Metso's IC(TM) Series crushing automation as a standard feature.

Metso is introducing new higher capacity models to its popular wheel-mounted Metso NW Rapid series. In addition to a bigger jaw crusher model, the NW Rapid units are now also available with a variety of robust cone crushers, including the first model with the MX crusher. Easily transportable using standard prime movers, over a thousand NW Rapid models have already been sold into aggregates and C&D recycling applications.

Read More

Tags
Light Equipment

Generac's new extended run fuel system allows for longer operating hours

The extended run fuel system includes a fuel pump switch, external diesel supply port, external DEF supply port and a DEF power receptacle.

Generac Mobile users can extend their Tier 4 Final generator run time with a new extended run fuel system. The system makes it easy to connect external fuel and diesel exhaust fluid (DEF) tanks to the generator for longer run times. The system is optional on all Generac Mobile Tier 4 Final diesel generators starting at 75 kVA and up.

Read More

Tags
Aggregates

Loadscan launch new conveyor belt scanner at AGG1/WOA

The LVS and CVS systems both utilise laser scanning technology, combined with proprietary software, to measure the exact volume of the material (either loaded in a truck/ trailer bin or flowing on a conveyor belt).

Loadscan will show their recently launched conveyor volume scanner (CVS) at the NSSGA's AGG1 expo in Indianapolis. This year Loadscan will be showcasing its CVS alongside the well-known load volume scanner (LVS) on 12-14 February 2019 at booth 39063.

Read More

Tags
Industry News

Hyundai Construction adds Butler Equipment to North American distribution network

Butler Equipment currently services the compact construction and landscape market in central Connecticut and Hyundai will allow them to better service their customer base along with new customers' needs for larger equipment.

Hyundai Construction Equipment Americas has expanded its North American authorized dealer network with the addition of Butler Equipment LLC. Butler will be offering Hyundai Construction Equipment at their West Hartford, Connecticut, location.

Read More

Tags
Telematics

Skyjack's ELEVATE off-highway telematics solution takes home LLEAP Award

This is the 13th year for these awards, and their focus is to shed light on noteworthy innovations that propel the industry forward.

Skyjack took home a Leadership in Lifting Equipment and Aerial Platforms (LLEAP) Award last month. The OEM's off-highway telematics solution, ELEVATE, won in the category of OEM Features or Essential Components. The mobile first solution was launched in early 2018 and Skyjack says that it has since garnered attention from rental companies and associations worldwide.

Read More