Case 650L crawler dozer a high performance machine The lower operating height of the new Case 650L crawler dozer allows it to work around low overhangs, while its lighter weight is ideal for work in soft soil conditions. The shorter track means easier turning, making the machine extremely maneuverable on the job site. The compact size also makes the crawler dozer easy to transport from job to job. A 90-inch blade allows for operation between buildings with narrow lot lines.
Dual hydrostatic pumps deliver power to each track through large drive components and this allows operators to push more material through the turn, reducing the number of passes required to move material. They also provide precise variable power turning and counter rotation. Adjustable operator settings allow the customer to set the steering, shuttle and maximum speed based on personal preference or application. The low-effort, single-lever PAT blade control increases productivity with simultaneous, multifunction control. The operator can pitch the blade to match the material being worked.
There are two track options available. The Case Lubricated Track (CLT) is sealed and lubricated, with an oil reservoir in each pin. The Case Extended Life Track (CELT) uses a large diameter hardened bushing, which provides outstanding durability and undercarriage life in abrasive soil conditions.
The 74 net hp (55 kW) Tier 3, four-cylinder, 4.5-litre turbocharged Case Family IV engine has electronic fuel injection for maximum fuel efficiency and easier starts in cold weather. Operating weights on the 650L are 16,250 pounds (7370 kg) on the LT (Long Track), 16,800 pounds (7619 kg) on the WT (Wide Track) and 17,550 pounds (7959 kg) on the LGP (Low Ground Pressure). The machine is ideal for residential job sites and confined commercial work areas.
Dual hydrostatic pumps deliver power to each track through large drive components and this allows operators to push more material through the turn, reducing the number of passes required to move material. They also provide precise variable power turning and counter rotation. Adjustable operator settings allow the customer to set the steering, shuttle and maximum speed based on personal preference or application. The low-effort, single-lever PAT blade control increases productivity with simultaneous, multifunction control. The operator can pitch the blade to match the material being worked.
There are two track options available. The Case Lubricated Track (CLT) is sealed and lubricated, with an oil reservoir in each pin. The Case Extended Life Track (CELT) uses a large diameter hardened bushing, which provides outstanding durability and undercarriage life in abrasive soil conditions.
The 74 net hp (55 kW) Tier 3, four-cylinder, 4.5-litre turbocharged Case Family IV engine has electronic fuel injection for maximum fuel efficiency and easier starts in cold weather. Operating weights on the 650L are 16,250 pounds (7370 kg) on the LT (Long Track), 16,800 pounds (7619 kg) on the WT (Wide Track) and 17,550 pounds (7959 kg) on the LGP (Low Ground Pressure). The machine is ideal for residential job sites and confined commercial work areas.
