The new Volvo MT2000 is a four-track, front-load, half-lane milling machine powered by a 610-hp Cummins engine. It offers three distinct engine and drum cutting speeds selectable from the operator’s panel – an industry first. The low-speed selection provides higher torque at a lower engine rpm to power through tough material or deep-cut applications. The high-speed selection is available for maximum travel speed on shallow cutting depths. The standard cutting speed is used to provide maximum horsepower and efficiency at normal cutting depths.
It can run both 78.7- and 86-inch (2,000- and 2,185-mm) wide drums. The drum and housing are easily removed together to reduce drum changing time and complexity. The Volvo MT2000 incorporates advanced technology with intuitive operator panels that are easy to understand and operate. Four ground control panels are conveniently located at each corner of the machine. The Volvo MT2000 offers mechanical or sonic grade control sensors that can be plugged into any of six ground locations. A slope sensor is a standard feature. The grade and slope control panels can be plugged into any of six ground locations, plus a location in the operator control area. A ground crew member has the flexibility to control both sides of the machine, and the front or rear, from one grade and slope control panel. The machine is pre-wired for an optional 30-foot (9.1 m) sonic averaging system.
The dual operating stations on the Volvo MT2000 have adjustable seats and console storage compartments. The Volvo MT2000 includes 14 working lights for work at night.
It can run both 78.7- and 86-inch (2,000- and 2,185-mm) wide drums. The drum and housing are easily removed together to reduce drum changing time and complexity. The Volvo MT2000 incorporates advanced technology with intuitive operator panels that are easy to understand and operate. Four ground control panels are conveniently located at each corner of the machine. The Volvo MT2000 offers mechanical or sonic grade control sensors that can be plugged into any of six ground locations. A slope sensor is a standard feature. The grade and slope control panels can be plugged into any of six ground locations, plus a location in the operator control area. A ground crew member has the flexibility to control both sides of the machine, and the front or rear, from one grade and slope control panel. The machine is pre-wired for an optional 30-foot (9.1 m) sonic averaging system.
The dual operating stations on the Volvo MT2000 have adjustable seats and console storage compartments. The Volvo MT2000 includes 14 working lights for work at night.
