Flex-Mat 3 is a high-performance, self-cleaning screen media which increases throughput of spec product by up to 40 percent (left photo) over woven wire or polyurethane panels by eliminating blinding, pegging and clogging (right photo). It has increased the screening ef-ficiency in more than 15,000 aggregate applications worldwide.
It also increases the production volume of spec product because it has up to 30 percent more open area than woven wire screens – allowing 30 percent more properly sized material to continuously fall through. Flex-Mat 3’s independently vibrating wires, bonded in place with the distinctive lime-green polyurethane strips, better separate material and increase screening efficiency on screen boxes of all types. Wear life exceeds that of traditional woven wire by up to three times because there are no cross wires with high-wear spots as there are with woven wire. Wire configurations include a diamond-shaped Flex-Mat “D” for most standard applications; wave-patterned Flex-Mat “S” for removal of fines; and triangular Flex-Mat “T” for heavy scalping or fine screening applications.
It also increases the production volume of spec product because it has up to 30 percent more open area than woven wire screens – allowing 30 percent more properly sized material to continuously fall through. Flex-Mat 3’s independently vibrating wires, bonded in place with the distinctive lime-green polyurethane strips, better separate material and increase screening efficiency on screen boxes of all types. Wear life exceeds that of traditional woven wire by up to three times because there are no cross wires with high-wear spots as there are with woven wire. Wire configurations include a diamond-shaped Flex-Mat “D” for most standard applications; wave-patterned Flex-Mat “S” for removal of fines; and triangular Flex-Mat “T” for heavy scalping or fine screening applications.