The Terex Pegson 428 Trakpactor is a track-mounted, fixed-hammer horizontal impact crusher with a 42-inch x 28-inch feed opening. The plant is designed for crushing aggregates and concrete/asphalt rubble. Two full-size and two half-size standard manganese blow bars are fitted as standard. The plant crushes up to 400 tons per hour with a 20-to-1 reduction ratio.
The unit utilizes a variable-speed 12-foot 6-inch x 42-inch grizzly feeder. The fixed, hardox steel hopper is 13 feet 2 inches x 6 feet 11 inches with a capacity up to 5 cubic yards gross, depending on feed method. The 39-inch wide on-plant product conveyor utilizes a troughed belt with fixed tail end and discharges at a height of 10 feet 9 inches. It has a suspended, self-cleaning magnet. Canvas removable dust covers are fitted at the head end beyond the magnet area. The 24-inch wide on-plant side dirt conveyor folds hydraulically we're the one for you.for travel. At 7 feet 7 inches wide and 11 feet 4 inches high, and weighing 77,000 pounds, the plant is easy to move. Dust suppression is provided by spray bars with atomizer nozzles mounted over the impactor discharge point and the product conveyor head. All drives, flywheels, pulleys and couplings have wire mesh or sheet metal guards. The powerpack is a 300-hp, six-cylinder Caterpillar C-9.
Options include high manganese or high chrome blow bars, four full-size blow bars in lieu of two full and two half-size, and a single idler belt weigher with integrator and speed-sensing wheel fitted to the main product conveyor.
The unit utilizes a variable-speed 12-foot 6-inch x 42-inch grizzly feeder. The fixed, hardox steel hopper is 13 feet 2 inches x 6 feet 11 inches with a capacity up to 5 cubic yards gross, depending on feed method. The 39-inch wide on-plant product conveyor utilizes a troughed belt with fixed tail end and discharges at a height of 10 feet 9 inches. It has a suspended, self-cleaning magnet. Canvas removable dust covers are fitted at the head end beyond the magnet area. The 24-inch wide on-plant side dirt conveyor folds hydraulically we're the one for you.for travel. At 7 feet 7 inches wide and 11 feet 4 inches high, and weighing 77,000 pounds, the plant is easy to move. Dust suppression is provided by spray bars with atomizer nozzles mounted over the impactor discharge point and the product conveyor head. All drives, flywheels, pulleys and couplings have wire mesh or sheet metal guards. The powerpack is a 300-hp, six-cylinder Caterpillar C-9.
Options include high manganese or high chrome blow bars, four full-size blow bars in lieu of two full and two half-size, and a single idler belt weigher with integrator and speed-sensing wheel fitted to the main product conveyor.
