Fintec's new 1440 is a track-mounted mobile unit equipped with a field proven Sandvik impact crusher.
The new model, the company's first since it was acquired by Sandvik last year, combines Fintec's experience in the design of mobile crushers with Sandvik's manufacturing of high output impact crushers for quarrying, demolition and recycling applications. Powered by a fuel-efficient 330 kW Cat C-13 Tier 3 compliant diesel engine, the Fin-tec 1440 is carried on a manoeuvrable tracked undercarriage and incorporates a Sandvik PR301D impactor with a fluid clutch drive. Fed via a two-deck pre-screen, the crusher is a four hammer open-style rotor with a diameter of 1,150 mm and a width of 1,330 mm and discharges onto a secondary pan feeder. The plant is also equipped with a primary feeder and a separate two-deck pre-screen.
A relatively low weight and compact dimensions - the unit has an operating weight of 49.8 tonnes and is 15.5 metres in length in transport configuration - means the Fintec 1440 is transportable in a single load, allowing it to be readily moved and redeployed for maximum utilisation. Optional equipment includes a remote diesel and water pump, an over-band magnet for recycling and demolition applications, and a dolly chassis for ease of transport.
The machine is designed to deliver throughputs from 300 to 350 tonnes/hour in materials including granite, slate, limestone, brick and asphalt and is suitable for a wide variety of applications such as secondary or fine crushing of softer rocks and in various demolition and recycling applications.
The new model, the company's first since it was acquired by Sandvik last year, combines Fintec's experience in the design of mobile crushers with Sandvik's manufacturing of high output impact crushers for quarrying, demolition and recycling applications. Powered by a fuel-efficient 330 kW Cat C-13 Tier 3 compliant diesel engine, the Fin-tec 1440 is carried on a manoeuvrable tracked undercarriage and incorporates a Sandvik PR301D impactor with a fluid clutch drive. Fed via a two-deck pre-screen, the crusher is a four hammer open-style rotor with a diameter of 1,150 mm and a width of 1,330 mm and discharges onto a secondary pan feeder. The plant is also equipped with a primary feeder and a separate two-deck pre-screen.
A relatively low weight and compact dimensions - the unit has an operating weight of 49.8 tonnes and is 15.5 metres in length in transport configuration - means the Fintec 1440 is transportable in a single load, allowing it to be readily moved and redeployed for maximum utilisation. Optional equipment includes a remote diesel and water pump, an over-band magnet for recycling and demolition applications, and a dolly chassis for ease of transport.
The machine is designed to deliver throughputs from 300 to 350 tonnes/hour in materials including granite, slate, limestone, brick and asphalt and is suitable for a wide variety of applications such as secondary or fine crushing of softer rocks and in various demolition and recycling applications.
