The 5710D is a tracked horizontal grinder designed for high-volume producers with very demanding end-product specifications. Powered by a Tier II or Tier IVi Caterpillar C27 1050HP (772 kW) engine, the 5710D provides the highest power to weight ratio of any Peterson grinder. At 88,500 pounds (40,150 kg), the 5710D is designed for operations requiring high production and frequent moves between jobs. With a feed opening of 60 x 40 inches (152 x 102 cm) combined with Peterson’s high lift feed roll, 5710D can readily reduce a wide range of material including stumps.
The 5710D control panel features a large LCD display that provides the operator with the information needed to efficiently operate the unit. System pressure transducers and remote monitoring capability simplify set up and provide complete engine and system parameters. The 5710D can be operated by wireless remote from the comfort of your loader. The optional tow dolly makes highway transportation between jobs easy. The quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials. Grates are removed through an access door on the side wall. Since 1981, Peterson has specialized in the developing of delivery and processing equipment that turns low-grade organic materials into high value products.
Features & Benefits
Quick-change multiple grate system
The 5710D features a large grate area that enables the 5710D to produce materials to exact specifications. Our quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials.
Impact Cushion System
Shear pins above the cushion and a sensing circuit that stop the engine help protect the shaft from catastrophic damage in the event of a severe impact.
The new control panel provides self-diagnostics for faulty sensors and open circuits. The 5710D control panel features a large LCD display that provides the operator with the information needed to efficiently operate the unit.
Impact Release System
The floating anvil mode provides a high production primary reduction with more protection from contaminated feedstocks and reduced fuel consumption.
|Basic Machine Weight||Approximately 93,000 lbs (42,184 kg) - 95,000 lbs (43,091) without dolly|
|Horsepower||C27 1050HP (772 kW) (standard) Tier II or Tier IVi|
|Discharge Conveyor Width||60” (152 cm)|
|Total Grate Area||4060 in² (26 193 cm² )|
|Hopper Capacity||7.0 yd³ (5.39 m³)|
|Feed Opening (width x height)||60 x 40” (152 x 102 cm)|