Heavy Equipment Guide Logo

Lincoln Electric’s new Flextec 350X and LN-25X feature CrossLinc Technology

The Flextec 350X Multi-Operator Welder.
The Flextec 350X Multi-Operator Welder.

Lincoln Electric launches new CrossLinc Technology-enabled welding equipment, providing advantages for the construction, shipbuilding, barge, heavy fabrication and other markets. The Flextec 350X welder and LN-25X wire feeder use a proprietary communications protocol to transfer operator voltage adjustments at the feeder to the power source hundreds of feet away using a common, copper weld cable. No additional control cable is required. The result is greater safety, quality and productivity for jobsite and fab-shop environments.

Flextec 350X

Built on industry-proven design elements, Lincoln Electric’s new Flextec 350X multi-process welding power source delivers premium arc performance for all DC wire, stick and TIG processes and gouging up to 3/16 inch (4.8 mm). Engineered for outdoor use and harsh environments, this IP23-rated welder features fully protected components.

With an output range of 5 to 425 amps, the Flextec 350X is rated at 300 amps, 32 volts at 100 percent duty cycle or 350 amps, 34 volts at 60 percent duty cycle. Lightweight and portable, the compact new model weighs only 77 pounds (34.9 kilograms).

The Flextec 350X is offered as a Construction model for connection with across-the-arc or CrossLinc-enabled feeders or a Standard model compatible with a greater selection of feeders, including across-the-arc, analogue, digital or CrossLinc Technology-enabled wire feeders. Multi-operator 4-pack and 6-pack rack systems are available for each model.

LN-25X

Built using the same proven design qualities of the LN-PRO product line, the LN-25X feeder is designed to be simple, reliable and easy to service when necessary. LN-25 PRO feeders feature a rugged Maxtrac drive system, dual range wire feed speed, encapsulated and protected electronics and a tough, flame-resistant case.

This feeder is rated 450 amps at 60 percent duty cycle, with a wire feed speed range of 50-700 inches per minute. Wire diameters range from .023-1/16 inch (0.6-1.6 millimetres) for GMAW wires and .030-5/64 inch (0.8-2.0 millimetres) for cored wires. The LN-25X can handle 12-inch (305-millimetre) or 8-inch (203-millimetre) spools and weighs less than 37 pounds (16 kilograms).

The X in the LN-25X name indicates the feeder is designed for Lincoln Electric’s CrossLinc Technology-enabled operation as well as across-the-arc operation.

Lincoln Electric-Flextec350X welder with CrossLinc Technology.

Related Articles