Tags
Light Equipment

Wacker Neuson offers serious power for industrial applications

G625 Mobile Generator
G625 Mobile Generator

Wacker Neuson has added two new mobile generator models to its growing line of industrial application products. The new G625 and G1100 provide all the power that is needed for larger, industrial applications. Both models are equipped with load sharing/paralleling, allowing these generator to be easily scaled up to meet even higher power demands. The integration of many standard features provides ease of operation and maintenance. A digital controller monitors and protects the generators and engines while providing continuous operating data on easy to read LCD displays.

Wacker Neuson’s new industrial grade generators feature a Deep Sea 8610 controller and motorized circuit breaker that allows load sharing/paralleling operation. The connections provide for synchronized communication between generators. Extensive premium features include battery disconnect switch, circulation coolant heater, engine oil drain with manual pump, low coolant shutdown, dual stage Racor fuel filter with water separation and battery charger are all included as standard. Also standard are environmentally friendly “green” features that include a 110-percent fluid containment with liquid level alarm, fuel level gauge at fill point and no mess oil and radiator drains. Both units also feature a 3-way fuel supply valve that allows for easy switching from on-board fuel tank to external bulk fuel tanks.

The G625 is powered by a rugged 810 horsepower, 6-cylinder Volvo Tier 2 diesel engine and is housed in a heavy-duty sound attenuated enclosure which is perfect of job sites requiring quiet operation. This “1/2-meg” generator is available in skid or trailer mount and produces 500 kW (625 kVA) prime power and 550 kW (688 kVA) standby power. Simple voltage selection is made with the use of a two position link board to reduce connection errors.

The G1100 is powered by a 1490 horsepower, 12-cylinder Cummins Tier 2 diesel engine and is housed in a heavy duty, 20-foot ISO container capable of operation up to 113-degrees Fahrenheit (45-degrees Celsius). The sound-attenuated enclosure is designed for larger applications requiring quiet operation. This “1-meg” industrial generator produces 920 kW (1150 kVA) prime power and 1015 kW (1269 kVA) standby power.

Company Info

Related News

Tags
Light Equipment

Miller single-operator Big Blue 600 Air Pak

Big Blue 600 Air Pak welder/generator.

The new Big Blue 600 Air Pak welder/generator provides the reliability and versatility needed for field-based work that requires single-operator power for welding, carbon arc gouging, auxiliary power, or running an air compressor to perform critical repair and maintenance functions.

Read More

Tags
Light Equipment
Portable Power & Compressors

Kohler adds new models to diesel mobile generator line up

The 90REOZT4 mobile diesel generators

Kohler Power Systems is adding two new models to its robust line of diesel-powered mobile generators. The 90REOZT4 and 120REOZT4 offer flexible options to meet end-users’ needs and feature Kohler’s unrivaled quality and reliability. The Tier 4 Final generator models are built to withstand the elements, run long hours in prime and standby applications, and meet all EPA emission standards.

Read More

Get our newsletter
(it's Free)

Insight delivered weekly to your inbox

it's free!
Heavy Equipment Guide
Tags
Light Equipment

Chicago Pneumatic launches versatile new light tower with heavy-duty polyethylene canopy

CPLT V4 light tower is the first model that features a heavy-duty polyethylene canopy.

Chicago Pneumatic Construction Equipment has added a new light tower to their lineup with the launch of the CPLT V4 to the North American market. It is their first model that features a heavy-duty polyethylene canopy for rugged durability that is designed to withstand the most extreme elements and working conditions.

Read More

Tags
Light Equipment

Chicago Pneumatic launches first LED light tower

Chicago Pneumatic Construction Equipment (CP) has launched their first LED light tower to the North American market with the introduction of the CPLT V5+ HiLight, joining the CPLT V4 metal halide version in the CP lineup. The new high-performance light tower features a heavy-duty polyethylene canopy for rugged durability and is designed to withstand the most extreme elements and working conditions.

Read More

Tags
Light Equipment

SubArc Portable Welding System offers mobility and exceptional flexibility

Miller has introduced a new compact, turnkey submerged arc welding solution — the SubArc Portable Welding System. This self-contained, ready-to-weld system contains the power source, column and boom on a mobile platform.

Miller Electric Mfg. Co. has introduced the new SubArc Portable Welding System, a self-contained, ready-to-weld system that can be easily positioned and adapted to meet the needs of the application.

Read More

Tags
Light Equipment

Honda adds GFCI feature to additional generator models

Honda EB6500 Industrial Series Generator

Honda Power Equipment has announced that it has added ground fault circuit interrupter (GFCI) technology to three of its most popular generator models for commercial, rental and residential applications. At the 2016 World of Concrete show in Las Vegas, an international event showcasing leading industry suppliers and dedicated to the commercial concrete and masonry construction industries, Honda unveiled three enhanced models, the Honda EB6500 Industrial Series generator, the Honda EM5000 Deluxe Series generator and the Honda EG4000 Economy Series generator, each equipped with GFCI 20 amp duplex receptacles. GFCI protects a user from electrical shock by shutting down the circuit when current is flowing along an unintended path, or ground fault.

Read More

Tags
Light Equipment

Lincoln Electric’s new Flextec 350X and LN-25X feature CrossLinc Technology

The Flextec 350X Multi-Operator Welder.

Lincoln Electric launches new CrossLinc Technology-enabled welding equipment, providing advantages for the construction, shipbuilding, barge, heavy fabrication and other markets. The Flextec 350X welder and LN-25X wire feeder use a proprietary communications protocol to transfer operator voltage adjustments at the feeder to the power source hundreds of feet away using a common, copper weld cable. No additional control cable is required. The result is greater safety, quality and productivity for jobsite and fab-shop environments.

Read More

Tags
Light Equipment

Kohler introduces new natural gas generator line

Kohler Decision-Maker 8000 digital controller.

Kohler Power Systems is launching an all-new line of large natural gas generators designed specifically for standby, prime or continuous power applications in the North American market. The new line of large gas gensets, which will be available in nodes ranging from 425 kW to 1,300 kW, meet Environmental Protection Agency (EPA) operational requirements and offer advanced control and monitoring capabilities through the Kohler Decision-Maker 8000 digital controller. Paired with Kohler transfer switches and switchgear, the company offers total system integration with a seamless solution customized and built by a team of Kohler engineers.

Read More

Tags
Light Equipment

ESAB multi-process welding system provides industrial quality arc performance in a compact package

The ESAB Rebel EMP 215ic features such innovative technology as sMIG (“smart MIG”) controls, multi-process arc performance that rivals industrial inverters and an advanced technology LCD/TFT display.

ESAB has introduced the Rebel EMP 215ic, a 120V-230V, CC/CV welding system that offers true multi-process arc performance, location flexibility, lightweight portability and a groundbreaking operator interface. A unique sMIG (“smart MIG”) function enables users to begin MIG welding – with an extremely stable arc – just by setting metal thickness and wire diameter. Unlike competitive units, there is no need to enter information for shielding gas mix.

Read More

Get our newsletter
(it's Free)

Insight delivered weekly to your inbox

it's free!
Heavy Equipment Guide
Tags
Light Equipment

Liebherr's tower crane division receives largest single order

The order from Turkey is the largest single order in the history of the Liebherr Tower Cranes Division.

The new Istanbul Airport will be the largest airport in the world with around 150 million passengers passing through it every year from 2020. It is an ambitious project and has resulted in the largest single order in the history of the Liebherr Tower Cranes division. A total of 58 EC-H series cranes will be used to build the "İstanbul Yeni Havalimanı". The first of these tower cranes were delivered recently and will remain installed at the airport until 2018.

Read More

Tags
Light Equipment

Square Wave TIG 200 welding machine from Lincoln Electric

The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore their creativity.

The new Square Wave TIG 200 welding machine from Lincoln Electric offers a multi-process TIG and stick welding experience for craftsmen, small shop fabricators, makers, motorsports enthusiasts and hobbyists. Users can perform AC TIG welding on aluminum and DC TIG welding on steel, stainless and chrome-moly when precision and bead appearance are important. Users can also switch to stick welding when working with thicker materials or welding outdoors.

Read More

Tags
Light Equipment

Lincoln Electric Ranger 250 GXT Engine-Driven Welder with Camouflage Graphics Wrap

WHITE TAIL CAMO RANGER 250 GXT

Contractors can get the features they need for construction and maintenance work, plus a new, eye-catching, white tail camouflage graphics wrap, with the White Tail Camo Ranger 250 GXT engine-driven welder from Lincoln Electric. This is the first commercially available engine-driven welder from a major manufacturer to feature not only a graphic wrap treatment but also a camouflage design, a popular choice among hunters and tradesmen across the country. A VIKING 3350 Series White Tail Camo auto-darkening welding helmet with a matching camo graphic pattern is also available.

Read More

Tags
Light Equipment
Portable Power & Compressors

Hipower Systems High-Efficiency Apollo L-30 LED Lighting Tower

APOLLO LT-30 Heavy Duty Combo Light Tower

Hipower Systems has announced the Apollo L-30 – a heavy-duty, generator-equipped lighting tower. The ultra-long-lasting, energy-efficient LED lighting is the first to be designed specifically for the rigorous demands of the mobile worksite. According to the company, it is also the only light source for light towers that meets Illuminating Engineering Society (IES) standards for glare reduction, bug reduction (attracts 80 percent fewer insects than traditional lights) and shadow reduction.

Read More

Tags
Light Equipment

Doosan Portable Power Utility Mount P185 Air Compressor is Designed with Operator in Mind

With a free-air delivery of 185 cfm and rated operating pressure of 100 psi, the utility mount P185 portable air compressor from Doosan Portable Power offers the power to meet a variety of applications, including powering handheld air tools, sandblasting, cable laying, pipeline testing and paint striping. The above deck portability provides towing capacity for larger machinery.

Read More